external wall insulation
Cutting device for Isolena sheep's wool insulation
Cutter with circular blade for optimum processing of all Isolena products.This ergonomically adapted tool, for the installation of all Isolena sheep's wool insulation products,enables you to quickly, cleanly and effectively adapt your sheep's wool product to its intended purpose.Cutting the insulation rolls to lengthOn-site bevellingCutting of stripsYou can also order this product on loan with your purchased Isolena products.The purchase price will be charged to you as a deposit and credited back after return.The hire charge is EUR 50 for the first two weeks and EUR 15 for each additional week or part thereof.week EUR 15. The amount incurred will be deducted from the deposit paid after the device has been returned.The borrower must bear the cost of returning the equipment.The borrower will be charged EUR 29 for a defective circular blade.
€294.06*
Isolena, carded loose wool, stuffing wool, 100% sheep's wool, 2.5 kg/pack
Loose, carded wool fleece made from 100% virgin sheep's woolFinished with tested Ionic Protect® biocide-free wool protection;Long-term test according to CUAP/EAD, Nature Plus certificate, ETAFree from foreign supporting fibres or gridsApplication:For filling joints, when installing windows and doors, roof windows,floor, buffer tanks, joints between beams and wallsApplication:Fill joints with a spatula or spread loose wool fleece by handConsumption:approx. 18-30kg is sufficient for 1m3Additional benefits:Healthy room air thanks to the air-purifying effect of the sheep's woolPleasant room climate thanks to the moisture-regulating effect of the sheep's woolTechnical data:Bulk density: 18-30kg/m3Thermal conductivity depending on the stuffing density ~W/mkVapour diffusion resistance coefficient μ: 1Specific heat capacity c: 1760 J/kgKScope of delivery: 2.5 kg/pack
Content: 2.5 Kilogram (€14.76 / 1 Kilogram)
€36.89*
Pro Clima Roflex 50, pipe sleeves for indoors and outdoors, Ø 50 -90 mm
For the quick and permanently tight passage of pipes through the airtight layer. Can also be used outdoors, e.g. for under-roofing or renovation vapour barriers.Bonding with TESCON VANA.Application video Data sheet Application instructionsAdvantagesKeeps components dry: quick and easy sealingSecure connection thanks to TESCON VANA with waterproof SOLID adhesiveSafe even in hot environments: temperature-stable up to 150 °CPractical working: Pipes can be pushed and pulled in the sleeve - the connection remains tightExtremely flexible and stretchable, no protruding grommetStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. greases or silicones). Substrates must be sufficiently dry and stable.Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.General conditionsAdhesive bonds must not be subjected to tensile loads.Rub adhesive tapes firmly. Ensure sufficient counter pressure.Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds.Quickly remove increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.
€3.59*
Pro Clima, Instaabox, installation box, for up to 3 appliance boxes
AdvantagesFor cables and conduits up to 20 mm in diameterStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Provides space for up to three appliance boxesCan be extended as required: Simply cut open and glue togetherBest values in the pollutant test, test carried out in accordance with AgBB / ISO 16000Data sheet Processing instructionsMaterial: stretchable, flexible polyethyleneTemperature resistance -10°C to +80°CCable diameter up to 20 mmsd value >10 mDepth 55 mmLength/width of installation level 260 mm/ 130 mmTotal length/width 320 mm/ 190 mmApplicationIn constructions without an installation level, the INSTAABOX can create space for appliance boxes or similar. For this purpose, it is attached to the existing vapour barrier and airtight layer and connected to it in an airtight manner. The requirements of DIN 4108-7, SIA 180 and OENORM B 8110-2 are met with regard to airtightness when using conventional appliance boxes. The INSTAABOX can be used for both interior and exterior walls.The INSTAABOX is oversized so that the airtightness level is not damaged when the openings for the appliance boxes are drilled out.General conditionsBonded joints must not be subjected to tensile loads. When bonding vapour barriers, battens must support the weight of the insulation material. Secure bonding with battens if necessary.Rub adhesive tapes down firmly. Ensure sufficient counter pressure. Airtight bonding can only be achieved on vapour control layers that are laid without folds.Quickly remove increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.SubstratesThe INSTAABOX can be combined with all standard airtight substrates. Recommendations for suitable fasteners for connection to the airtight layer (e.g. vapour barrier,
€3.20*
Pro Clima, INTELLO PLUS, reinforced hydrosafe® high-performance vapour control layer for all fibrous insulation materials, 50 m
ApplicationFor use in roofs, walls, ceilings and floors in externally vapour-permeable and vapour-tight constructions, e.g. flat/slope roofs and green roofs according to design.Data sheet Processing instructions Safety data sheet Passive house certificate Video Functionality Application videoAdvantagesBest protection against structural damage and mould because it is moisture-variable with more than 100-fold spreadTest winner at Stiftung Warentest 4/2012Permanently safe: function officially tested and confirmed (ETA-18/1146)Safe winter construction sites thanks to Hydrosafe® functionCan be combined with all fibre-based insulation materials (including blown-in insulation)Easy to process: Dimensionally stable, no splicing or tearingBest values in the pollutant test, test carried out in accordance with AgBB / ISO 16000Processingpro clima INTELLO PLUS should be laid with the foil side (labelling) facing the installer. They can be laid tightly and without sagging along and across the supporting structure, e.g. the rafters. When laid horizontally (across the supporting structure), the distance from the supporting structure is limited to a maximum of 100 cm. After installation, the weight of the insulation material must be supported on the inside by transverse battens at a maximum distance of 50 cm. If, when using mat and board-shaped insulating materials, the weight of the insulating material, for example, is expected to exert planned tensile loads on the adhesive tape joints, an additional support batten should be placed on the overlap bonding. Alternatively, the adhesive tape can be additionally secured on the overlap with transverse adhesive tape strips at 30 cm intervals.Airtight bonding can only be achieved on vapour control layers laid without folds. Quickly dissipate increased room humidity (e.g. during the construction phase) through consistent and constant ventilation. Occasional shock ventilation is not sufficient to quickly remove large amounts of building-related moisture from the building; if necessary, install a building dryer.To prevent condensation, INTELLO PLUS should be airtightly bonded immediately after installation of the mat and board-shaped thermal insulation. This is particularly important when working in winter.Additionally for blow-in insulation materialsINTELLO PLUS can also be used as a boundary layer for all types of blown-in insulation materials. Its reinforcing fabric ensures low expansion during blowing. Laying along the supporting structure offers the advantage that the butt joint is on a solid base and is therefore protected.To avoid condensation, the blown-in insulation should be installed immediately after completion of the airtight layer. This is particularly important when working in winter.The functional principleMaximum protection against structural damage and mouldINTELLO works according to the principle of a climate-controlled membrane: in winter it is sealed against moisture, in summer the molecular structure becomes more open and enables safe drying out.
Content: 75 Square metre (€4.21 / 1 Square metre)
€315.95*
Pro Clima, KAFLEX duo cable sleeves for 2 cables, Ø 4.8 - 12 mm, inside and outside
For fast and permanently tight cable entry through the airtight layer. Can also be used outdoors, e.g. for under-roofing or renovation vapour barriers.Data sheet Processing instructions Processing videoAdvantagesKeeps building components dry: quick and easy sealingSecure connection thanks to waterproof SOLID adhesivePractical working: Cables can be pushed and pulled in the sleeve - the connection remains tightExtremely flexible and stretchable, no protruding grommetMore flexible further work: Can be exposed to the weather for 6 monthsStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. greases or silicones). Substrates must be sufficiently dry and stable.Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.General conditionsAdhesive bonds must not be subjected to tensile loads.Rub adhesive tapes firmly. Ensure sufficient counter pressure.Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds.Quickly remove increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.
€2.40*
Pro Clima, KAFLEX mono cable sleeves for 1 cable, Ø 4.8 - 12 mm, inside and outside
For fast and permanently tight cable entry through the airtight layer. Can also be used outdoors, e.g. for under-roofing or renovation vapour barriers.Data sheet Processing instructions Processing videoAdvantagesKeeps building components dry: quick and easy sealingSecure connection thanks to waterproof SOLID adhesivePractical working: Cables can be pushed and pulled in the sleeve - the connection remains tightExtremely flexible and stretchable, no protruding grommetMore flexible further work: Can be exposed to the weather for 6 monthsStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. greases or silicones). Substrates must be sufficiently dry and stable.Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.General conditionsAdhesive bonds must not be subjected to tensile loads.Rub adhesive tapes firmly. Ensure sufficient counter pressure.Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds.Quickly remove increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.
€2.20*
Pro Clima, ORCON F, all-round connection adhesive for indoors and outdoors, 310 ml cartridge
- Creation of airtight connections for all types of vapour control layers and airtight membranes. This includes all pro clima vapour control layers and airtight membranes (e.g. pro clima INTELLO, DB+, INTESANA, DASATOP and DA).Data sheet Processing instructions- Bonding windtight connections of all types of sarking and underlay membranes (PP, PET). The connection bonding of e.g. pro clima SOLITEX MENTO family, SOLITEX UD, SOLITEX PLUS and SOLITEX UM connect complies with the requirements of the ZVDH product data sheets.- Windproof bonding of wall formwork membranes (e.g. pro clima SOLITEX FRONTA family).- Bonding of overlaps and connections of trickle protection membranes.ApplicationCreation of airtight connections of all types of vapour control layers and airtight membranes. This includes all pro clima vapour control layers and airtight membranes (e.g. pro clima INTELLO, DB+, INTESANA, DASATOP and DA).Bonding windproof connections of all types of underlay and underlay membranes (PP, PET). The connection bonding of e.g. pro clima SOLITEX MENTO family, SOLITEX UD, SOLITEX PLUS and SOLITEX UM connect fulfils the requirements of the ZVDH product data sheets.Windproof bonding of wall formwork membranes (e.g. pro clima SOLITEX FRONTA family).Bonding of overlaps and connections of trickle protection membranes.AdvantagesBonds securely even in frost: can be applied from -10 °CParticularly durable: 100 years of adhesive strength independently tested and confirmedProvides a firm and permanently elastic holdEnsures secure connections: Penetrates deep into the substrate, remains elasticTest winner at Stiftung Warentest 4/2012Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Can be stored down to -20 °C. Material does not freeze in the cartridgeBest values in the pollutant test, test carried out in accordance with AgBB / ISO 16000Consumption valuesDelivery form Contents Bead RangeCartridge 310 ml 5 mm ~ 15 mAdvantagesBonds securely even in frost: can be used from -10 °CParticularly durable: 100 years of adhesive strength independently tested and confirmedProvides a firm and permanently elastic holdEnsures secure connections: Penetrates deep into the substrate, remains elasticTest winner at Stiftung Warentest 4/2012Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Can be stored down to -20 °C. Material does not freeze in the cartridgeBest values in the pollutant test, test carried out in accordance with AgBB / ISO 16000ApplicationCreation of airtight connections for all types of vapour control layers and airtight membranes. This includes all pro clima vapour control layers and airtight membranes (e.g. pro clima INTELLO, DB+, INTESANA, DASATOP and DA).Bonding windproof connections of all types of underlay and underlay membranes (PP, PET). The connection bonding of e.g. pro clima SOLITEX MENTO family, SOLITEX UD, SOLITEX PLUS and SOLITEX UM connect fulfils the requirements of the ZVDH product data sheets.Windproof bonding of wall formwork membranes (e.g. pro clima SOLITEX FRONTA family).Bonding of overlaps and connections of trickle protection membranes.General conditionsBonds must not be subjected to tensile loads.The final strength is only achieved when dry. This must be taken into account for subsequent airtightness measurements and/or the installation of blown-in insulation materials. If necessary, securing measures, e.g. mechanical securing of non-load-bearing substrates, are recommended.Quickly dissipate increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.SubstratesClean substrates before bonding. Mineral surfaces (plaster or concrete) may be slightly damp.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Substrates must have sufficient load-bearing capacity - if necessary, a mechanical securing device (pressure bar) must be used (e.g. for sanding substrates). Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour control layers and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Connections can be made on mineral substrates (e.g. plaster or concrete), rough-sawn and planed wood as well as hard wood-based panels (chipboard, OSB, BFU, MDF).The best results for the safety of the construction are achieved on high-quality substrates.It is your own responsibility to check the suitability of the substrate; test bonding may be recommended.
Content: 0.315 Litre (€29.02 / 1 Litre)
€9.14*
Pro Clima, SOLITEX FRONTA QUATTRO, wall formwork sheeting for gap formwork up to 35 mm, roll 50 m
Use as a wall formwork membrane behind closed and open façades (gap formwork, up to 35 mm gap width; formwork width = at least 3x gap width). Installation on formwork, wood-based panels and all matt and panel-shaped thermal insulation materials.Data sheet Processing instructionsAdvantagesEnsures secure building components: Highly permeable to diffusion and at the same time maximally impermeable to driving rainDry building components: non-porous TEEE functional membrane actively transports moisture to the outsideNot visible behind gap formwork: black fleece with print in the overlap areaMaximum ageing resistance and thermal stability thanks to TEEE membrane6 months outdoor weatheringGeneral conditionsSOLITEX FRONTA QUATTRO membranes must be laid with the printed side facing outwards. They are laid horizontally, tightly and without sagging.When used behind gap formwork, the gap size must not exceed 35 mm. The width of the formwork: min. 3x gap width.The distance between the gap formwork and the sheet must be at least 20 mm.Fixings must not be made in areas where water runs off collectively.Additional measures should be taken during the construction phase (e.g. tarpaulins) in the case of inhabited buildings or buildings requiring special protection. Tarpaulins should also be considered for longer interruptions to work.Moisture-active wind sealSOLITEX FRONTA QUATTRO wall formwork membranes are equipped with monolithic, non-porous, moisture-active functional membranes made of the latest TEEE technology.They offer significantly higher component safety than conventional microporous membranes.New standards: Monolithic SOLITEX membranepro clima SOLITEX FRONTA QUATTRO has a non-porous, closed-cell TEEE membrane that offers particularly good protection against driving rain.Unlike conventional wall formwork membranes, where diffusion takes place via air exchange through the microporous membrane, with a SOLITEX membrane diffusion takes place actively along the molecular chains.SOLITEX FRONTA QUATTRO has an sd value of 0.05 m.With active moisture transport, the TEEE membrane ensures an extremely fast drying capacity, which provides the membrane with the best possible protection against ice formation in winter.Once ice has formed, diffusion-open wall formwork membranes turn into vapour barriers (ice is diffusion-tight) and then represent moisture traps.Other special features of the TEEE membrane are its reliable protection against wood impregnating agents (water droplets cannot penetrate the membrane, even with reduced surface tension, as there are no pores) and its particularly high heat stability (melting point polymer approx. 200 °C, PP approx. 140 °C). This heat stability gives the plastic extremely high ageing stability over decades.High performance for all requirementsThe functional film is securely protected between two robust, particularly tear-resistant protective and cover fleeces made of polypropylene - ideal for high loads when laying the sheets.The cover fleece is also water-repellent and offers optimum protection against moisture penetration. It protects the special film underneath from damage and UV radiation.The membranes are glare-free due to the black colouring of the outer cover fleece.The membrane can be exposed to the elements for up to 6 months.
Content: 75 Square metre (€5.03 / 1 Square metre)
€377.47*
Pro Clima, Tescon INVIS, black all-round adhesive tape for indoors and outdoors, roll 30 m, width 6 cm
AdvantagesSticks securely - even in damp conditions: waterproof SOLID adhesiveBecomes virtually invisible: black backing fleece not visible behind gap formworkHolds reliably in the long term: UV-stable behind gap formworkMore flexible further work: 6 months freely weatherableEasy to apply: Fleece backing very pliable and can be torn off by handFaster further work: Fleece backing can be plastered over directlyStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, tested in accordance with AgBB / ISO 16000Product information Processing instructionsApplicationExterior: Creation of windtightness of wall formwork membranes with pro clima SOLITEX FRONTA family as well as sarking and underlay membranes. Windtight bonding of wood-based panels as underlay. Airtight bonding of on-roof and renovation vapour barriers and airtight membranes.Indoors: Airtight bonding of vapour barriers and airtight membranes as well as airtight wood-based panels.All interior and exterior bonding can be carried out both to each other and to neighbouring smooth, non-mineral components (e.g. pipe penetrations, skylights).Division of the separating film forWidth 100 mm: 50 / 50 mmWidth 150 mm: 75 / 75 mmGeneral conditionsBonds must not be subjected to tensile loads.After bonding the sheets, battens must support the weight of the insulation material. Secure bonding with battens if necessary.Rub the adhesive tapes down firmly. Ensure sufficient counter pressure.Windproof, airtight or rainproof bonding can only be achieved on vapour control layers or sarking and façade membranes laid without folds.Quickly dissipate increased room humidity by consistent and constant ventilation, if necessary set up a building dryer.When plastering, please follow the recommendations of the plaster manufacturer for non-absorbent substrates. A bonding bridge may be required.SubstratesClean substrates before bonding. Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Substrates must be sufficiently dry and stable. Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour control layers and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET). Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards). Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates. You are responsible for checking the suitability of the substrate; test bonding may be recommended. Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.
Content: 30 Linear metre (€1.11 / 1 Linear metre)
€33.29*
Pro Clima, TESCON VANA all-round adhesive tape for indoors and outdoors, roll 30 m, width 6 cm
AdvantagesSticks securely - even in damp conditions: waterproof SOLID adhesiveParticularly durable: 100 years of adhesive strength independently tested and confirmedContinue working more flexibly: can be freely weathered for 6 monthsContinue working faster: Fleece backing can be plastered over directlyEasy to process: Fleece backing is very pliable and can be torn off by handTest winner at Stiftung Warentest 4/2012Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000Data sheet Processing instructions 100 years of adhesive strength ApplicationIndoors: Airtight bonding of vapour barriers and airtight membranes as well as airtight wood-based panels.Exterior: Ensuring wind and rain tightness of sarking, sarking and wall formwork membranes (e.g. pro clima SOLITEX) and sarking panels.Airtight bonding of on-roof and renovation vapour barriers and airtight membranes.All interior and exterior bonding can be carried out both to each other and to neighbouring smooth, non-mineral components (e.g. pipe penetrations, skylights).General conditionsBonds must not be subjected to tensile loads.After bonding membranes, battens must support the weight of the insulation material. Secure bonded joints with battens if necessary.Rub adhesive tapes down firmly. Ensure sufficient counter pressure. Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds. Quickly dissipate increased room humidity by consistent and constant ventilation, if necessary set up a building dryer.When plastering, please follow the recommendations of the plaster manufacturer for non-absorbent substrates. A bonding bridge may be required.SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Substrates must be sufficiently dry and stable. Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.
Content: 30 Linear metre (€0.94 / 1 Linear metre)
€28.24*
Steico "flex" 036/ 30-240mm thickness / flexible ecological wood fibre insulation, 1220x575mm / pack 6.3135 m²
Steico "flex" is a flexible, clampable and ecological wood fibre insulation. It can be used in roof, wall and ceiling constructions, as well as for cavity insulation of partition walls, facing shells and installation levels. Download product data sheet As the moisture storage capacity of wood fibres is many times higher than that of conventional insulation materials, STEICOflex contributes to the regulation of air humidity (e.g. for interior wall insulation) - a high moisture storage capacity also prevents the rapid occurrence of free condensation. This makes the entire construction more resistant to moisture damage. Special plus: The thermal insulation properties of STEICOflex are not impaired by temporary changes in humidity. The advantages of these wood fibre insulation materials at a glance: Flexible, clampable thermal insulation Easy to process and particularly skin-friendlyOutstanding adaptation to boundary componentsExcellent insulating properties in winter and summerParticularly open to diffusion for a healthy indoor climateClimate-regulating due to high sorption capacityContributes greatly to an excellent indoor climate in terms of building biologyEcological, environmentally friendly and recyclableBuilding authority-approved thermal insulation material made from wood fibresThe insulation materials are available in the following thicknesses: 30,40,50,60,80,100,120,140,160,180,200,220 and 240mm. The packaging units are automatically displayed when you specify the quantity to make ordering easier. Please do not hesitate to contact us if you have any questions about application, processing or any other queries. Our expert team will of course be happy to help you - even after your purchase. Technical data: Dimensions (per mat): 1220 x 575 mm Bulk density: 60 kg/m³ Nominal value of thermal conductivity: 0.036 [W/(m*K)] Materials used: Wood fibre, polyolefin fibre, ammonium phosphate Storage location: BaustoffPlus central warehouse in 08606 Oelsnitz/V. Self collection: possible Dispatch: by forwarding agent Manufacturer: Steico
Content: 6.313 Square metre (€6.11 / 1 Square metre)
€38.56* €40.58*
Steico multi cover 5 1.50m (75m²) Walk-on vapour control layer
Vapour barrier membrane with airtight function for outdoor use For use in exterior roof and wall constructionsSpecial features:- Excellent walkability even when wet - 3-ply, coated PP fleece, grid-reinforced - 2 integrated self-adhesive zones - Airtight and resistant to driving rain - Extremely high tear resistance - Can be used as a temporary temporary coveringDiffusible, sd value 5m
Content: 75 Square metre (€2.92 / 1 Square metre)
€219.00*
Steico multi UDB 1.50m (75m²) sarking and underlay membrane
Highly diffusion-open sarking, sarking and airtight membranefor new build and renovationSpecial features: 3-ply, tear-resistant and flexible2 integrated self-adhesive zonesAirtight, highly diffusion-open and resistant to driving rainExtremely high tear resistanceFree weathering possible for up to 3 monthsFunctional layer reinforced on both sides with PP fibre fleece
Content: 75 Square metre (€3.05 / 1 Square metre)
€229.00*
Steico protect, wood fibre insulation board for external insulation, plasterable, tongue and groove, thickness 60 mm
- Robust wood fibre insulation board for ecological rendered façades- Particularly stable and durable- Excellent heat protection in summer- Water-repellent and at the same time open to diffusion to protect the constructionProduct data sheet Processing instructions- Thicknesses from 40 to 100 mm- Suitable for blow-in insulation, from a board thickness of 40 mm- Also available as large format boards for factory prefabrication- Comprehensive catalogue with construction details available- Made from fresh softwood - sustainable climate protection through CO2 storage
Content: 0.795 Square metre (€24.31 / 1 Square metre)
€19.33* €20.35*
Steico universal dry, underlay and wall construction board
- The thermally insulating sarking and wall construction board for new builds and renovations- Medium raw density profiles for a balanced combination of cold protection in winter and heat protection in summer- Reduces structural thermal bridges- Can be used from a board thickness of 35 mm in combination with STEICO blow-in insulation- Seamed underlay in accordance with ZVDH for roof pitches ≥ 16°- Underlay board type: UDP-A, suitable as temporary roofing- Ecological, environmentally friendly and recyclable like woodData sheet Topic booklet on modernising old buildings Topic booklet on new buildings Processing instructions Video roof renovation Video underlays
Content: 1.5 Square metre (€7.33 / 1 Square metre)
€11.00*
TESCON No.1 all-round adhesive tape with carrier made of perforated PE film, for indoors and outdoors, roll 30 m, width 6 cm
AdvantagesSticks securely - even in damp conditions: waterproof SOLID adhesive !!!!!!Particularly durable: 100 years of adhesive strength independently tested and confirmedEasy to apply: Flexible backing, can be torn off by handAlso for penetrations: Very elastic and permanently mouldableFaster further work: Can be plastered over directlyStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out according to AgBB / ISO 16000Data sheet Processing instructions 100-year adhesive strengthApplicationIndoors: Airtight bonding of vapour barriers and airtight membranes as well as airtight wood-based panels.Exterior: Airtight bonding of on-roof and renovation vapour retarders and airtight membranes. Creating the windtightness of sarking, underlay and wall formwork membranes (e.g. pro clima SOLITEX). Windproof bonding of wood-based panels for underlay.All interior and exterior bonding can be carried out both to each other and to neighbouring smooth, non-mineral components (e.g. pipe penetrations, skylights).General conditionsBonds must not be subjected to tensile loads. After bonding membranes, battens must support the weight of the insulation material. Secure bonded joints with battens if necessary.Rub adhesive tapes down firmly. Ensure sufficient counter pressure. Windproof, airtight or rainproof bonding can only be achieved on vapour control layers or underlay and façade membranes laid without folds. Quickly dissipate increased room humidity by consistent and constant ventilation, if necessary set up a building dryer.When plastering, please follow the recommendations of the plaster manufacturer for non-absorbent substrates. A bonding bridge may be required.SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Substrates must be sufficiently dry and stable. Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.
Content: 30 Linear metre (€0.92 / 1 Linear metre)
€27.70*
external wall insulation
Acoustics & Indoor Climate
Yosima – Medium-textured clay plaster
AMPACK Building Sealing
Content: 0.5 Litre (€37.60 / 1 Litre)
€18.80*
Content: 5 Linear metre (€4.17 / 1 Linear metre)
€20.87*
Content: 25 Linear metre (€2.34 / 1 Linear metre)
€58.43*
Content: 25 Linear metre (€2.59 / 1 Linear metre)
€64.80*
Content: 12 Linear metre (€0.57 / 1 Linear metre)
€6.78*
Content: 0.31 Litre (€30.29 / 1 Litre)
€9.39*
Content: 8 Linear metre (€1.60 / 1 Linear metre)
€12.82*
Content: 20 Linear metre (€5.66 / 1 Linear metre)
€113.29*
Content: 25 Linear metre (€1.25 / 1 Linear metre)
€31.33*
Content: 40 Linear metre (€1.21 / 1 Linear metre)
€48.25*
Content: 25 Linear metre (€1.83 / 1 Linear metre)
€45.71*
Content: 25 Linear metre (€1.75 / 1 Linear metre)
€43.83*
Content: 25 Linear metre (€0.86 / 1 Linear metre)
€21.44*
Content: 25 Linear metre (€1.27 / 1 Linear metre)
€31.81*
Content: 30 Linear metre (€0.73 / 1 Linear metre)
€21.91*
Content: 37.5 Square metre (€2.58 / 1 Square metre)
€96.59*
Content: 75 Square metre (€2.97 / 1 Square metre)
€223.01*
Content: 75 Square metre (€3.29 / 1 Square metre)
€246.60*
Content: 75 Square metre (€2.37 / 1 Square metre)
€177.39*
Content: 75 Square metre (€3.08 / 1 Square metre)
€231.07*
Content: 75 Square metre (€3.52 / 1 Square metre)
€264.00*
Content: 75 Square metre (€4.92 / 1 Square metre)
€368.98*
Content: 62.5 Square metre (€1.50 / 1 Square metre)
€93.70*
Content: 75 Square metre (€2.47 / 1 Square metre)
€185.12*
Content: 75 Square metre (€2.05 / 1 Square metre)
€153.43*