Pro Clima Roflex 50, pipe sleeves for indoors and outdoors, Ø 50 -90 mm
ProClima
Regular price:
€3.59
Content:
1 Piece
Available in 5 days, delivery time 2-5 days
Product number:
01-Roflex50
Product information "Pro Clima Roflex 50, pipe sleeves for indoors and outdoors, Ø 50 -90 mm"
For the quick and permanently tight passage of pipes through the airtight layer. Can also be used outdoors, e.g. for under-roofing or renovation vapour barriers.
Bonding with TESCON VANA.
Advantages
Keeps components dry: quick and easy sealing
Secure connection thanks to TESCON VANA with waterproof SOLID adhesive
Safe even in hot environments: temperature-stable up to 150 °C
Practical working: Pipes can be pushed and pulled in the sleeve - the connection remains tight
Extremely flexible and stretchable, no protruding grommet
Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2
Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000
Substrates
Clean substrates before bonding.
Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. greases or silicones). Substrates must be sufficiently dry and stable.
Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).
Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).
Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.
The best results for the safety of the construction are achieved on high-quality substrates.
You are responsible for checking the suitability of the substrate; test bonding may be recommended.
Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.
General conditions
Adhesive bonds must not be subjected to tensile loads.
Rub adhesive tapes firmly. Ensure sufficient counter pressure.
Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds.
Quickly remove increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.
| Areas of application: | Between rafter insulation, External wall insulation, Insulation of intermediate ceilings, Interior fit-out, Over-rafter insulation |
|---|---|
| Manufacturer: | Proclima |
| Product category: | Accessories, Interior fit-out, Roof, Wall |
| Product group: | Interior insulation, Over-rafter insulation, Flexible insulation |
| Product line: | Pro Clima Roflex |
| Shipping: | Collection available, Freight shipping, Parcel shipping |
Login
No reviews found. Share your insights with others.