impact sound insulation
Cutting device for Isolena sheep's wool insulation
Cutter with circular blade for optimum processing of all Isolena products.This ergonomically adapted tool, for the installation of all Isolena sheep's wool insulation products,enables you to quickly, cleanly and effectively adapt your sheep's wool product to its intended purpose.Cutting the insulation rolls to lengthOn-site bevellingCutting of stripsYou can also order this product on loan with your purchased Isolena products.The purchase price will be charged to you as a deposit and credited back after return.The hire charge is EUR 50 for the first two weeks and EUR 15 for each additional week or part thereof.week EUR 15. The amount incurred will be deducted from the deposit paid after the device has been returned.The borrower must bear the cost of returning the equipment.The borrower will be charged EUR 29 for a defective circular blade.
€294.06*
Isolena edge insulation strips made from 100 % virgin sheep's wool / decoupling strips
Thickness: 9 mmWidth: 10 cmLength of the roll: 10 mEdge insulation strips made of pure new sheep's wool for floating floors.As decoupling strips to rising components or as partition strips in drywall construction.Excellent sound decoupling.
€14.49* €15.99*
Isolena impact sound insulation coated with soda kraft paper, thickness 3.5 mm, 25 m²/roll
Isolena impact sound insulation with paperFootfall and impact sound insulation under floating floors.The original with soda kraft paper on the top side for improved laying performance.Data sheet brochureSuitable for underfloor heating!Density: 100 kg/m³Thickness: 3.5 mmWidth: 100 cmLength/roll: 25 running metres = 25 m²/roll100% wool, renewable, durable, recyclable and without synthetic additivesWool protection: IONIC PROTECTVapour diffusion resistance index: u1Impact sound improvement: up to 21 dBTalk to us!!!Special sizes are possible!
Content: 25 Square metre (€6.11 / 1 Square metre)
€152.80*
Isolena sound felt, sound insulation, natural mottled yurt felt with 100kg/m³, thickness 9mm
Isolena sound felt Sound insulation for suspended ceilings in the systemAbsorber layer for suspended ceilingsAcoustic insulation with simultaneous room air decontaminationData sheet brochure overviewDensity: 100 kg/m³Thickness : 9 mmWidth : 100 cmLength/roll: 10 running metres = 10 m²/roll100% wool, renewable, durable, recyclable and without synthetic additivesWool protection: IONIC PROTECTProduct description: Sound absorber as an overlay for horizontal or sloping surfaces.Impact sound felt for full-surface installation or as strips for sound decoupling between the subfloor and the structure.Natural mottled yurt felt for the side wall and roof.Fire behaviour: C-s2, d0,Vapour diffusion resistance factor: u1Dynamic stiffness: 62.1 MN/m³Talk to us!!!Special dimensions possible in 50 mm increments up to 240 cm!
Content: 0.5 Square metre (€19.42 / 1 Square metre)
€9.71*
Isolena sound felt, sound insulation, natural mottled yurt felt with 100kg/m³, thickness 9mm
Isolena sound felt Sound insulation for suspended ceilings in the systemAbsorber layer for suspended ceilingsAcoustic insulation with simultaneous room air decontaminationData sheet brochure overviewDensity: 100 kg/m³Thickness : 9 mmWidth : 100 cmLength/roll: 10 running metres = 10 m²/roll100% wool, renewable, durable, recyclable and without synthetic additivesWool protection: IONIC PROTECTProduct description: Sound absorber as an overlay for horizontal or sloping surfaces.Impact sound felt for full-surface installation or as strips for sound decoupling between the subfloor and the structure.Natural mottled yurt felt for the side wall and roof.Fire behaviour: C-s2, d0,Vapour diffusion resistance factor: u1Dynamic stiffness: 62.1 MN/m³Talk to us!!!Special dimensions possible in 50 mm increments up to 240 cm!
Content: 5 Square metre (€15.26 / 1 Square metre)
€76.31*
Isolena wool felt, impact sound insulation for sound decoupling, thickness 3.5 mm, length 25 m
Impact sound insulation / wool felt 100% sheep's wool without natron paper Isolena impact sound insulation made from 100% sheep's wool (pollutant-reducing roll)Roll width: 100cm / 25m²/roll- Pollutant removal roll- Impact and walking sound insulation made from 100% sheep's wool- Strongly stabilised sheep's wool feltAREA OF APPLICATION:under floating PARQUET, WOOD, CORK, LINOLEUM or LAMINATE FLOORSISOLENAWOLLE is a quality product with very good impact and structure-borne sound insulation propertiesbest walking comfort due to high elasticity, equalises unevenness.Improves walking noise by 50%Impact sound improvement of up to 21dBSuitable for underfloor heating, low thermal resistance (0.1m²K/W)Tested fire protection Euroclass E. BKZ in CH: 5.3With IONIC PROTECT wool protectionADDITIONAL BENEFITS:Healthy indoor air thanks to the air-purifying effect of sheep's woolPleasant room climate thanks to the moisture-regulating effect of the sheep's wool
Content: 25 Square metre (€4.22 / 1 Square metre)
€105.61*
Pro Clima, TESCON VANA all-round adhesive tape for indoors and outdoors, roll 30 m, width 6 cm
AdvantagesSticks securely - even in damp conditions: waterproof SOLID adhesiveParticularly durable: 100 years of adhesive strength independently tested and confirmedContinue working more flexibly: can be freely weathered for 6 monthsContinue working faster: Fleece backing can be plastered over directlyEasy to process: Fleece backing is very pliable and can be torn off by handTest winner at Stiftung Warentest 4/2012Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000Data sheet Processing instructions 100 years of adhesive strength ApplicationIndoors: Airtight bonding of vapour barriers and airtight membranes as well as airtight wood-based panels.Exterior: Ensuring wind and rain tightness of sarking, sarking and wall formwork membranes (e.g. pro clima SOLITEX) and sarking panels.Airtight bonding of on-roof and renovation vapour barriers and airtight membranes.All interior and exterior bonding can be carried out both to each other and to neighbouring smooth, non-mineral components (e.g. pipe penetrations, skylights).General conditionsBonds must not be subjected to tensile loads.After bonding membranes, battens must support the weight of the insulation material. Secure bonded joints with battens if necessary.Rub adhesive tapes down firmly. Ensure sufficient counter pressure. Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds. Quickly dissipate increased room humidity by consistent and constant ventilation, if necessary set up a building dryer.When plastering, please follow the recommendations of the plaster manufacturer for non-absorbent substrates. A bonding bridge may be required.SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Substrates must be sufficiently dry and stable. Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.
Content: 30 Linear metre (€0.94 / 1 Linear metre)
€28.24*
Steico Base, pressure-resistant floor insulation and plaster base board, thickness 20 mm
The versatile wood fibre insulation board with particularly high compressive strengthData sheet Plaster recommendation clay plaster Video- Optimum combination for heavy-duty dry and wet screed constructions- Suitable as insulation board for mastic asphalt screeds- Interior plaster base board for lime and clay plasters- Excellent insulating properties- Ecological and environmentally friendly- RecyclableDelivery formsThickness: 20 mm, 40 mm, 60 mm, 80 mmm, 1000 mm
Content: 0.81 Square metre (€8.35 / 1 Square metre)
€6.76*
Steico Ecosilent 3mm thick, impact sound insulation made of ecological wood fibre (9.32 m² per package)
The ECO-Silent impact sound insulation from STEICO is THE ecological underlay for laminate and prefinished parquet floors made from natural, ecological wood fibreData sheet-This impactsound underlay from Steico has a very high compressive strength (up to 15 tonnes/m²)- creates an even floor surface without unevenness- is ideally suited for underfloor heating- is extremely durable thanks to its stable fibre structure- is quick and easy to work with- has a handy package size for practical use on construction sites- contributes to a healthy indoor climate
Content: 9.32 Square metre (€1.08 / 1 Square metre)
€10.05*
Steico ECOsilent 5mm thick, impact sound insulation made of ecological wood fibre (7 m² per package)
The ECO-Silent impact sound insulation from STEICO is THE ecological underlay for laminate and prefinished parquet floors made from natural, ecological wood fibreData sheet-This impactsound underlay from Steico has a very high compressive strength (up to 15 tonnes/m²)- creates an even floor surface without unevenness- is ideally suited for underfloor heating- is extremely durable thanks to its stable fibre structure- is quick and easy to work with- has a handy package size for practical use on construction sites- contributes to a healthy indoor climate
Content: 7 Square metre (€1.64 / 1 Square metre)
€11.45*
Steico Ecosilent, 4 mm thick, impact sound insulation made of ecological wood fibre (7 m² per package)
The ECO-Silent impact sound insulation from STEICO is THE ecological underlay for laminate and prefinished parquet floors made from natural, ecological wood fibreData sheet-This impactsound underlay from Steico has a very high compressive strength (up to 15 tonnes/m²)- creates an even floor surface without unevenness- is ideally suited for underfloor heating- is extremely durable thanks to its stable fibre structure- is quick and easy to work with- has a handy package size for practical use on construction sites- contributes to a healthy indoor climate
Content: 7 Square metre (€1.32 / 1 Square metre)
€9.25*
Steico ECOsilent, 7 mm thick, impact sound insulation made of ecological wood fibre (7 m² per package)
The ECO-Silent impact sound insulation from STEICO is THE ecological underlay for laminate and prefinished parquet floors made from natural, ecological wood fibreData sheet-This impactsound underlay from Steico has a very high compressive strength (up to 15 tonnes/m²)- creates an even floor surface without unevenness- is ideally suited for underfloor heating- is extremely durable thanks to its stable fibre structure- is quick and easy to work with- has a handy package size for practical use on construction sites- contributes to a healthy indoor climate
Content: 6.99 Square metre (€2.50 / 1 Square metre)
€17.49*
Steico isorel 10mm, pressure-resistant wood fibre board for flat applications
All-round panel for a wide range of applications in floor and wall constructions, with very high compressive strength.Data sheet brochure Steico This Steico isorel board is cut in our wood workshop to a format suitable for pallet despatch. For this purpose, the large-volume panels offered by Steico are cut in half to make them suitable for despatch by a forwarding agent.Full panels of 2.5m x 1.2m are only available for self-collection.Versatile panel made from natural wood fibre- High compressive strength- High thermal insulation in summer- Excellent insulating properties- Optimum combination for dry and wet screed constructions- Suitable as insulation board for mastic asphalt screeds- Ecological, environmentally friendly and recyclable like natural wood
Content: 1.5 Square metre (€4.41 / 1 Square metre)
€6.62*
Steico Isorel, pressure-resistant wood fibre board, 8mm / 16 pcs - economy pack, DHL shipping
Versatile finishing board made of natural wood fibre for roof and floor constructions.With this offer, the standard Isorel boards are cut in half in our timber department in order to be able to offer you a size suitable for parcel shipping.This offer is aimed at DIY enthusiasts and hobbyists who do not require a large number of square metres.We ask all other customers to select the standard variant with forwarding agent dispatch.Data sheet Steico brochure- Can be used for many floor structures- High compressive strength- High summer heat protection- Excellent insulating properties- Optimum combination for dry and wet screed constructions- Suitable as insulation board for mastic asphalt screeds- Ecological, environmentally friendly and recyclable like natural woodDimensions: approx. 58.5cm x 100cmThickness: 8mmBulk density: approx. 230kg/m³Manufacturer: Steico
Content: 9.44 Square metre (€4.92 / 1 Square metre)
€46.41*
Steico isorel, versatile board made of natural wood fibre, thickness 8 mm
All-round panel for a wide range of applications in floor and wall constructions, with very high compressive strength.Data sheet brochure Steico Versatile board made from natural wood fibre-High compressive strength-High thermal insulation in summer-Excellent insulating properties-Optimum combination for dry and wet screed constructions- Suitableas insulation board for mastic asphalt screeds-Ecological, environmentally friendly and recyclable like natural wood
Content: 1.2 Square metre (€2.78 / 1 Square metre)
€3.34*
Steico soundstrip, edge insulation strip made of wood fibre, roll 10 m
Edge insulation strips and decoupling strips with excellent sound decoupling propertiesData sheet Steico brochureApplication:- as edge insulation strips for floating screed- as decoupling strips to rising building components- as partition strips in drywall construction- Provides excellent sound decoupling
€11.99* €14.27*
Steico therm SD, impact sound insulation 20 mm
Impact sound insulationClassified impact sound insulation made of natural wood fibre for use under screed systemsImpact sound insulation board for solid and wooden beam ceilingsSuitable for floating dry screed systems made of gypsum fibre or wood-based panelsSuitable for wet screed systems such as cement or anhydrite screedData sheetParticularly open to diffusionQuick and easy installationEcological, environmentally friendly and recyclableProduced and monitored in accordance with DIN EN 13171Board labelling Thickness 21/20 mm: WF - EN 13171 - T7 - SD50 - CP2; Thickness 31/30 mm: WF - EN 13171 - T7 - SD30 - CP2Fire behaviour according to DIN EN 13501-1 ENominal value thermal conductivity [W/(m*K)] 0.038Nominal value thermal resistance [(m²*K)/W] 0.50(21/20) / 0.75(31/30)Bulk density [kg/m³] approx. 160Dynamic stiffness [MN/m³] 50(21/20) / 30(31/30)Water vapour diffusion resistance µ 5sd value [m] 0.1(21/20) / 0.15(31/30)Specific heat capacity [J/(kg*K)] 2,100Length-related flow resistance [(kPa*s)/m²] ≥100Input materials Wood fibre, ply bondingWaste code (EWC/AVV) 030105/170201, disposal like wood and wood-based materialsRated value of thermal conductivity DE [W/(m*K)] 0.04Rated value of thermal conductivity AT [W/(m*K)] 0.042Rated value of thermal conductivity CH [W/(m*K)] 0.038Fire behaviour group according to VKF fire protection guideline RF3 crDelivery formsThickness [mm] 20 mm, 30 mmLength [mm] 1350 mmWidth [mm] 60 mmEdge: blunt
Content: 0.81 Square metre (€5.23 / 1 Square metre)
€4.24*
TESCON No.1 all-round adhesive tape with carrier made of perforated PE film, for indoors and outdoors, roll 30 m, width 6 cm
AdvantagesSticks securely - even in damp conditions: waterproof SOLID adhesive !!!!!!Particularly durable: 100 years of adhesive strength independently tested and confirmedEasy to apply: Flexible backing, can be torn off by handAlso for penetrations: Very elastic and permanently mouldableFaster further work: Can be plastered over directlyStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out according to AgBB / ISO 16000Data sheet Processing instructions 100-year adhesive strengthApplicationIndoors: Airtight bonding of vapour barriers and airtight membranes as well as airtight wood-based panels.Exterior: Airtight bonding of on-roof and renovation vapour retarders and airtight membranes. Creating the windtightness of sarking, underlay and wall formwork membranes (e.g. pro clima SOLITEX). Windproof bonding of wood-based panels for underlay.All interior and exterior bonding can be carried out both to each other and to neighbouring smooth, non-mineral components (e.g. pipe penetrations, skylights).General conditionsBonds must not be subjected to tensile loads. After bonding membranes, battens must support the weight of the insulation material. Secure bonded joints with battens if necessary.Rub adhesive tapes down firmly. Ensure sufficient counter pressure. Windproof, airtight or rainproof bonding can only be achieved on vapour control layers or underlay and façade membranes laid without folds. Quickly dissipate increased room humidity by consistent and constant ventilation, if necessary set up a building dryer.When plastering, please follow the recommendations of the plaster manufacturer for non-absorbent substrates. A bonding bridge may be required.SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Substrates must be sufficiently dry and stable. Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.
Content: 30 Linear metre (€0.92 / 1 Linear metre)
€27.70*
Wood fibre decoupling strips, thickness 12 mm and width 6 cm, 1.18 linear metres/piece
Versatile decoupling strips made from natural wood fibre High compressive strengthHigh thermal insulation in summerExcellent insulating propertiesOptimum combination for dry and wet screed constructionsEcological, environmentally friendly and recyclable like natural woodHere you have the opportunity to create a customised solution that is precisely tailored to your needs.your requirements.ApplicationSuitable for a wide range of applications in the field of sound insulation.Areas of application- Applications for sound decoupling in timber or drywall construction- As insulating strips or underlay for floor structures- As edge insulation strips and screed strips- As insulation strips for all interior construction applicationsNominal value of thermal conductivity [W/(m*K)] 0.05Thermal conduct ivity (in accordance with DIN EN 13986, Table 11) [W/(m*K)] 0.05Nominal value Thermal resistance [(m²*K)/W] 0.16(8) / 0.20(10) / 0.24(12) / 0.30(15) / 0.38(19)Bulk density [kg/m³] approx. 230Water vapour diffusion resistance µ 5sd value [m] 0.04(8) / 0.05(10) / 0.06(12) / 0.08(15) / 0.1(19)Specific heat capacity [J/(kg*K)] 2,100Compressive stress at 10% compression [N/mm²] ≥0.10Compressive strength [kPa] ≥100Input materialsWood fibreWaste code (EAK/AVV) 030105/170201, disposal like wood and wood-based materialsRated value of thermal conductivityDE (according to DIN ISO 10456, Tab. 3) [W/(m*K)] 0.07Rated valueof thermal conductivity AT [W/(m*K)] 0.055Rated value of thermal conductivityCH [W/(m*K)] 0.06Fire behaviour group according to VKF fire protection guidelineRF3
Content: 1.15 Linear metre (€0.82 / 1 Linear metre)
€0.94*
Wood fibre edge insulation strips, thickness 19 mm and width 14 cm, 1.18 linear metres/piece
Versatile edge insulation strips made from natural wood fibre High compressive strengthHigh summer thermal insulationExcellent insulating propertiesOptimum combination for dry and wet screed constructionsSuitable as edge insulation strips for mastic asphalt screedsEcological, environmentally friendly and recyclable like natural woodHere you have the opportunity to create a customised solution for your floor connection in the wall area that is precisely tailored to your needs.customised solution for your floor connection in the wall area.Processing:Determine the finished height of the floor and transfer it to the surrounding walls. Place the edge insulation strip against the wall or fix it to the wall with mounting adhesive or clips. The upper edge of the edge insulation strip should be at least 5 mm above the finished height of the floor structure.Do not cut off any excess material until after the top covering has been laid. If necessary, the height of the edge insulation strips can also be varied by applying two strips on top of each other.Nominal value of thermal conductivity [W/(m*K)] 0.05Thermal conduct ivity (according to DIN EN 13986, Table 11) [W/(m*K)] 0.05Nominal value Thermal resistance [(m²*K)/W] 0.16(8) / 0.20(10) / 0.24(12) / 0.30(15) / 0.38(19)Bulk density [kg/m³] approx. 230Water vapour diffusion resistance µ 5sd value [m] 0.04(8) / 0.05(10) / 0.06(12) / 0.08(15) / 0.1(19)Specific heat capacity [J/(kg*K)] 2,100Compressive stress at 10% compression [N/mm²] ≥0.10Compressive strength [kPa] ≥100Input materialsWood fibreWaste code (EAK/AVV) 030105/170201, disposal like wood and wood-based materialsRated value of thermal conductivityDE (according to DIN ISO 10456, Tab. 3) [W/(m*K)] 0.07Rated valueof thermal conductivity AT [W/(m*K)] 0.055Rated value of thermal conductivityCH [W/(m*K)] 0.06Fire behaviour group according to VKF fire protection guidelineRF3
Content: 1.18 Linear metre (€1.84 / 1 Linear metre)
€2.17*
impact sound insulation
Acoustics & Indoor Climate
Yosima – Medium-textured clay plaster
AMPACK Building Sealing
Content: 0.5 Litre (€37.60 / 1 Litre)
€18.80*
Content: 5 Linear metre (€4.17 / 1 Linear metre)
€20.87*
Content: 25 Linear metre (€2.34 / 1 Linear metre)
€58.43*
Content: 25 Linear metre (€2.59 / 1 Linear metre)
€64.80*
Content: 12 Linear metre (€0.57 / 1 Linear metre)
€6.78*
Content: 0.31 Litre (€30.29 / 1 Litre)
€9.39*
Content: 8 Linear metre (€1.60 / 1 Linear metre)
€12.82*
Content: 20 Linear metre (€5.66 / 1 Linear metre)
€113.29*
Content: 25 Linear metre (€1.25 / 1 Linear metre)
€31.33*
Content: 40 Linear metre (€1.21 / 1 Linear metre)
€48.25*
Content: 25 Linear metre (€1.83 / 1 Linear metre)
€45.71*
Content: 25 Linear metre (€1.75 / 1 Linear metre)
€43.83*
Content: 25 Linear metre (€0.86 / 1 Linear metre)
€21.44*
Content: 25 Linear metre (€1.27 / 1 Linear metre)
€31.81*
Content: 30 Linear metre (€0.73 / 1 Linear metre)
€21.91*
Content: 37.5 Square metre (€2.58 / 1 Square metre)
€96.59*
Content: 75 Square metre (€2.97 / 1 Square metre)
€223.01*
Content: 75 Square metre (€3.29 / 1 Square metre)
€246.60*
Content: 75 Square metre (€2.37 / 1 Square metre)
€177.39*
Content: 75 Square metre (€3.08 / 1 Square metre)
€231.07*
Content: 75 Square metre (€3.52 / 1 Square metre)
€264.00*
Content: 75 Square metre (€4.92 / 1 Square metre)
€368.98*
Content: 62.5 Square metre (€1.50 / 1 Square metre)
€93.70*
Content: 75 Square metre (€2.47 / 1 Square metre)
€185.12*
Content: 75 Square metre (€2.05 / 1 Square metre)
€153.43*