TESCON No.1 all-round adhesive tape with carrier made of perforated PE film, for indoors and outdoors, roll 30 m, width 6 cm
ProClima
Regular price:
€27.70
Content:
30 Linear metre
(€0.92 / 1 Linear metre)
Available in 5 days, delivery time 2-5 days
Product number:
SW10142
Product information "TESCON No.1 all-round adhesive tape with carrier made of perforated PE film, for indoors and outdoors, roll 30 m, width 6 cm"
Advantages
Sticks securely - even in damp conditions: waterproof SOLID adhesive !!!!!!
Particularly durable: 100 years of adhesive strength independently tested and confirmed
Easy to apply: Flexible backing, can be torn off by hand
Also for penetrations: Very elastic and permanently mouldable
Faster further work: Can be plastered over directly
Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2
Best values in the pollutant test, test carried out according to AgBB / ISO 16000
Application
Indoors: Airtight bonding of vapour barriers and airtight membranes as well as airtight wood-based panels.
Exterior: Airtight bonding of on-roof and renovation vapour retarders and airtight membranes. Creating the windtightness of sarking, underlay and wall formwork membranes (e.g. pro clima SOLITEX). Windproof bonding of wood-based panels for underlay.
All interior and exterior bonding can be carried out both to each other and to neighbouring smooth, non-mineral components (e.g. pipe penetrations, skylights).
General conditions
Bonds must not be subjected to tensile loads. After bonding membranes, battens must support the weight of the insulation material. Secure bonded joints with battens if necessary.
Rub adhesive tapes down firmly. Ensure sufficient counter pressure. Windproof, airtight or rainproof bonding can only be achieved on vapour control layers or underlay and façade membranes laid without folds. Quickly dissipate increased room humidity by consistent and constant ventilation, if necessary set up a building dryer.
When plastering, please follow the recommendations of the plaster manufacturer for non-absorbent substrates. A bonding bridge may be required.
Substrates
Clean substrates before bonding.
Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Substrates must be sufficiently dry and stable.
Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).
Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).
Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.
The best results for the safety of the construction are achieved on high-quality substrates.
You are responsible for checking the suitability of the substrate; test bonding may be recommended.
Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.
| Areas of application: | Between rafter insulation, Clay and drylining boards, External wall insulation, Impact sound insulation, Insulation in drylining, Insulation of intermediate ceilings, Insulation of intermediate floors, Interior fit-out, Joint insulation, Sound insulation |
|---|---|
| Length: | 30 m |
| Manufacturer: | Proclima |
| Packaging: | Roll |
| Pack size: | Roll 30 m |
| Product category: | Accessories, Acoustics, Insulation materials, Interior fit-out, Roof, Straw boards, Wall, Window products |
| Product group: | Interior insulation, Window products, Insulation materials, Flexible insulation, Floor insulation, Impact sound insulation |
| Product line: | Pro Clima adhesive tape |
| Shipping: | Collection available, Freight shipping, Parcel shipping |
| Width: | 6cm |
Login
No reviews found. Share your insights with others.