over-rafter insulation
Ampatex DB 90 vapour control layer and airtight sealing – short roll with Ampacoll INT (30 linear metres / 37.5 m²)
Ampatex DB 90 vapour control layer and airtight sealing – short roll with Ampacoll INT (30 linear metres / 37.5 m²)Ampatex DB 90 is a high-quality, two-layer vapour control layer and airtight membrane for use in almost all rear-ventilated roof and wall constructions. It offers a high-performance alternative to conventional PE films and impresses with its high tear resistance, dimensional stability and particularly easy installation.Manufactured from thermally bonded continuous fibres with an integrated PP filler layer (100% polypropylene), the membrane is entirely homogeneous, free from plasticisers and designed for long-term use in modern timber and drylining construction. Thanks to its translucent surface, it offers additional safety when blowing in cellulose or other blow-in insulation materials.The membranes do not expand or contract, do not attract dust and feature a printed cutting guide for quick and precise installation. With an sD value of approx. 20 m, Ampatex DB 90 reliably ensures moisture protection and permanently effective airtight sealing of the building envelope.Area of applicationOn the warm side of the thermal insulation in dry interior fit-outRoof and wall constructions Particularly suitable for constructions with blow-in insulationUniversal standard vapour control layer for new builds and refurbishmentsProduct features at a glanceVapour control layer and airtight sealing in a single productHighly tear-resistant and mechanically robustDimensionally stable, no stretching or shrinkingTranslucent for controlled blowing-in of insulation materialsDust-repellent surfacePrinted cutting guideAirtight sealing in accordance with EN 13984ContentsAmpatex DB 90 short rollIncludes Ampacoll INT adhesive tape (30 linear metres)Roll dimensions: 1.5 m × 25 m = 37.5 m²Data sheetTechnical Specifications Thickness: 0.33 mmGrammage: 90 g/m²sD value: approx. 20 mMaximum tensile strength (longitudinal/transverse): 160 / 160 NElongation at break (longitudinal/transverse): 30 / 30 %Tear resistance (longitudinal/transverse): 200 / 200 NTemperature resistance: –40 °C to +80 °CFire behaviour: Class EColour: YellowStandard: EN 13984:2013, Type AInstallation instructionsAmpatex DB 90 is installed on the warm side of the thermal insulation. The printed, smooth side faces the room and serves as the adhesive surface. The membranes must overlap by at least 10 cm and be bonded airtight using the supplied Ampacoll INT.Fixing in the overlap area: concealed with staples or nailsCarry out edge junctions using Ampacoll BK 530 or Ampacoll RAPermanently seal penetrations (e.g. pipes, rafters, purlins) with Ampacoll BK 535 (50 mm)Prime porous or dusty substrates with Ampacoll PrimaxThe final mechanical fixing of the membrane is achieved by the interior cladding.Ampatex DB 90 stands for reliable airtight sealing, high installation reliability and long-lasting moisture protection – the professional solution for demanding roof and wall structures.
Content: 37.5 Square metre (€2.58 / 1 Square metre)
€96.59*
Ampatex SB 130 Plus – formwork membrane, vapour control layer and airtight sealing (75 m² roll)
Ampatex SB 130 Plus – Formwork membrane, vapour control layer and airtight sealing (75 m² roll)The Ampatex SB 130 Plus formwork membrane is a high-quality, two-layer vapour control layer and airtight sealing solution for use in pitched roof applications. It combines the functions of a vapour control layer, airtight sealing and formwork membrane in a single product and is specifically designed for demanding applications in timber construction as well as for over-rafter insulation.Thanks to its two-layer construction comprising thermally bonded continuous fibres with an integrated PP filler layer (100% polypropylene), the membrane offers impressive robustness and durability. It can be left exposed to the elements for up to three months, making it ideally suited to the harsh conditions of everyday construction sites. The translucent design allows for a clear visual inspection of the substructure during installation.Ampatex SB 130 Plus is suitable for both internal use and exterior use on pitched roofs, particularly externally beneath the thermal insulation on sanded and unsanded timber boarding. The integrated adhesive strips on both sides facilitate quick, secure and airtight sealing.Data sheetProduct benefits at a glanceTwo-layer vapour control layer, airtight sealing and formwork membrane in a single systemCan be left exposed to the elements for 3 monthsTranslucent – the substructure remains visibleHighly robust and tear-resistant, ideal for use on construction sitesTested for airtight sealing and watertightnessIdeal for over-rafter insulationTapes integrated on both sides for secure overlap bondingAreas of applicationInside and outside of pitched roofsOn timber boarding (sanded and unsanded)Externally, beneath the thermal insulationOn the warm side of the thermal insulation layerForm of supplyAmpatex SB 130 Plus, roll with integrated tape on both sidesRoll dimensions: 1.50 m × 50 m = 75 m²Technical specifications (extract)Grammage: approx. 135 g/m²sD value: approx. 40 mWater resistance: passed at 2 kPaFire behaviour: Class EMaximum tensile strength (longitudinal/transverse): 220 / 220 N per 5 cmElongation at break (longitudinal/transverse): 25 per cent / 25 per centTear resistance (longitudinal/transverse): 230 / 210 NMinimum roof pitch: 5° (additional measures required for pitches between 5° and 9°)Installation instructionsAmpatex SB 130 Plus is laid parallel to the eaves on a flat substructure. Overlaps of at least 10 cm must be concealed with nails and bonded with Ampacoll XT for airtight sealing. Connections, penetrations and upstands (e.g. around chimneys, roof windows or vent pipes) must be professionally sealed using the appropriate Ampacoll system adhesive tapes. Any damage to the membranes must be sealed airtight immediately. Dusty or porous substrates must be primed in advance with Ampacoll Primax or Ampacoll Airmax.Ampatex SB 130 Plus offers a reliable, standards-compliant solution for permanently airtight and moisture-proof roof structures in modern timber construction.
Content: 75 Square metre (€3.29 / 1 Square metre)
€246.60*
Ampatex Solero plus – weather-resistant vapour control layer and airtight sealing with integrated adhesive zones (75 m²)
Ampatex Solero plus – weather-resistant vapour control layer and airtight sealing with integrated adhesive zones (75 m²)Ampatex Solero plus is a high-quality, three-layer functional membrane designed to provide a vapour control layer, airtight sealing and formwork membrane all in one product. It has been specially developed for demanding roof structures and is ideal for over-rafter insulation as well as for applications where temporary exposure to the elements is required. Thanks to its soft, fabric-like, non-slip surface, the membrane is particularly pleasant and efficient to work with. The adhesive tapes integrated on both sides enable quick, secure and permanently airtight sealing of the overlaps, without the need for additional accessories. With a weathering resistance of up to three months, Ampatex Solero plus offers a high level of reliability during the construction phase. The membranes are airtight, watertight up to 2 kPa and have an sD value of approx. 5 m, ensuring reliable regulation of water vapour transmission. Its mechanical strength and proven resistance following artificial ageing underline the product’s high quality and durability. Data sheetProduct features at a glance Three-layer vapour control layer, airtight sealing and formwork membrane Adhesive strips integrated on both sides for quick installation Can be left exposed to the elements for up to 3 months Fabric-like, soft and non-slip Airtight and waterproof (tested) Ideal for over-rafter insulation and complex roof structures Technical data Standard: EN 13984:2013 Product designation: Type A Grammage: 145 g/m² Fire behaviour: Class E Water vapour permeability: sD value approx. 5 m Overlap width: 10 cm Maximum tensile strength (longitudinal/transverse): 240 / 180 N Elongation at break (longitudinal/transverse): 40 / 40 % Tear resistance (longitudinal/transverse): 110 / 120 N Minimum roof pitch: 10° Airtight sealing: airtight Form of supply Dimensions: 1.5 m × 50 m Area: 75 m² per roll Installation instructions Ampatex Solero plus is usually installed on the warm side of the thermal insulation. It is laid parallel to the eaves on a flat substructure. Overlaps of 10 cm must be concealed with nails and sealed airtight using the integrated ampacoll adhesive tapes or Ampacoll XT. Connections to chimneys, roof windows and vertical structural elements must be made to a height of at least 15 cm using Ampacoll BK 530. Penetrations must be permanently sealed to be airtight and watertight using Ampacoll BK 535. Porous or dusty substrates must be primed in advance with Ampacoll Primax or Ampacoll Airmax. Any damage to the surface must always be properly sealed. Ampatex Solero plus thus represents a safe, efficient and practical solution for modern timber and roof construction.
Content: 75 Square metre (€2.37 / 1 Square metre)
€177.39*
Isolena, carded loose wool, stuffing wool, 100% sheep's wool, 2.5 kg/pack
Loose, carded wool fleece made from 100% virgin sheep's woolFinished with tested Ionic Protect® biocide-free wool protection;Long-term test according to CUAP/EAD, Nature Plus certificate, ETAFree from foreign supporting fibres or gridsApplication:For filling joints, when installing windows and doors, roof windows,floor, buffer tanks, joints between beams and wallsApplication:Fill joints with a spatula or spread loose wool fleece by handConsumption:approx. 18-30kg is sufficient for 1m3Additional benefits:Healthy room air thanks to the air-purifying effect of the sheep's woolPleasant room climate thanks to the moisture-regulating effect of the sheep's woolTechnical data:Bulk density: 18-30kg/m3Thermal conductivity depending on the stuffing density ~W/mkVapour diffusion resistance coefficient μ: 1Specific heat capacity c: 1760 J/kgKScope of delivery: 2.5 kg/pack
Content: 2.5 Kilogram (€14.76 / 1 Kilogram)
€36.89*
Pro Clima Roflex 50, pipe sleeves for indoors and outdoors, Ø 50 -90 mm
For the quick and permanently tight passage of pipes through the airtight layer. Can also be used outdoors, e.g. for under-roofing or renovation vapour barriers.Bonding with TESCON VANA.Application video Data sheet Application instructionsAdvantagesKeeps components dry: quick and easy sealingSecure connection thanks to TESCON VANA with waterproof SOLID adhesiveSafe even in hot environments: temperature-stable up to 150 °CPractical working: Pipes can be pushed and pulled in the sleeve - the connection remains tightExtremely flexible and stretchable, no protruding grommetStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. greases or silicones). Substrates must be sufficiently dry and stable.Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.General conditionsAdhesive bonds must not be subjected to tensile loads.Rub adhesive tapes firmly. Ensure sufficient counter pressure.Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds.Quickly remove increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.
€3.59*
Pro Clima, KAFLEX duo cable sleeves for 2 cables, Ø 4.8 - 12 mm, inside and outside
For fast and permanently tight cable entry through the airtight layer. Can also be used outdoors, e.g. for under-roofing or renovation vapour barriers.Data sheet Processing instructions Processing videoAdvantagesKeeps building components dry: quick and easy sealingSecure connection thanks to waterproof SOLID adhesivePractical working: Cables can be pushed and pulled in the sleeve - the connection remains tightExtremely flexible and stretchable, no protruding grommetMore flexible further work: Can be exposed to the weather for 6 monthsStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. greases or silicones). Substrates must be sufficiently dry and stable.Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.General conditionsAdhesive bonds must not be subjected to tensile loads.Rub adhesive tapes firmly. Ensure sufficient counter pressure.Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds.Quickly remove increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.
€2.40*
Pro Clima, KAFLEX mono cable sleeves for 1 cable, Ø 4.8 - 12 mm, inside and outside
For fast and permanently tight cable entry through the airtight layer. Can also be used outdoors, e.g. for under-roofing or renovation vapour barriers.Data sheet Processing instructions Processing videoAdvantagesKeeps building components dry: quick and easy sealingSecure connection thanks to waterproof SOLID adhesivePractical working: Cables can be pushed and pulled in the sleeve - the connection remains tightExtremely flexible and stretchable, no protruding grommetMore flexible further work: Can be exposed to the weather for 6 monthsStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. greases or silicones). Substrates must be sufficiently dry and stable.Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.General conditionsAdhesive bonds must not be subjected to tensile loads.Rub adhesive tapes firmly. Ensure sufficient counter pressure.Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds.Quickly remove increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.
€2.20*
Pro Clima, TESCON VANA all-round adhesive tape for indoors and outdoors, roll 30 m, width 6 cm
AdvantagesSticks securely - even in damp conditions: waterproof SOLID adhesiveParticularly durable: 100 years of adhesive strength independently tested and confirmedContinue working more flexibly: can be freely weathered for 6 monthsContinue working faster: Fleece backing can be plastered over directlyEasy to process: Fleece backing is very pliable and can be torn off by handTest winner at Stiftung Warentest 4/2012Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000Data sheet Processing instructions 100 years of adhesive strength ApplicationIndoors: Airtight bonding of vapour barriers and airtight membranes as well as airtight wood-based panels.Exterior: Ensuring wind and rain tightness of sarking, sarking and wall formwork membranes (e.g. pro clima SOLITEX) and sarking panels.Airtight bonding of on-roof and renovation vapour barriers and airtight membranes.All interior and exterior bonding can be carried out both to each other and to neighbouring smooth, non-mineral components (e.g. pipe penetrations, skylights).General conditionsBonds must not be subjected to tensile loads.After bonding membranes, battens must support the weight of the insulation material. Secure bonded joints with battens if necessary.Rub adhesive tapes down firmly. Ensure sufficient counter pressure. Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds. Quickly dissipate increased room humidity by consistent and constant ventilation, if necessary set up a building dryer.When plastering, please follow the recommendations of the plaster manufacturer for non-absorbent substrates. A bonding bridge may be required.SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Substrates must be sufficiently dry and stable. Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.
Content: 30 Linear metre (€0.94 / 1 Linear metre)
€28.24*
Roof insulation with natural and stable building materials - advice with range of materials
We would like to offer you the opportunity of a detailed consultation. Benefit from our many years of practical experience with natural and stable building materials in the field of on-roof insulation. Many successfully realised projects with satisfied customers prove us right. As we only offer our craftsmanship regionally, we would like to offer interested customers a professional service in this way. As it is almost impossible to provide detailed advice on materials and implementation details over the telephone, we offer the opportunity to realise this by paying a small expense allowance. For an expense allowance of just €35, you will receive detailed advice on the necessary building materials and finishing details from our range.You will also receive a detailed quotation for the required materials from our online range. If you place an order for the building materials, you will of course be credited this expense allowance.A telephone consultation cannot replace the work of an architect, energy consultant or other specialist on site. We would simply like to offer you quick, prompt and honest help over the phone. Should you nevertheless be dissatisfied with our advice, we will simply refund your money.Please be sure to include your telephone number with your order and we will get back to you as soon as possible.You can get a small insight into our work here
€35.00*
Steico "flex" 036/ 30-240mm thickness / flexible ecological wood fibre insulation, 1220x575mm / pack 6.3135 m²
Steico "flex" is a flexible, clampable and ecological wood fibre insulation. It can be used in roof, wall and ceiling constructions, as well as for cavity insulation of partition walls, facing shells and installation levels. Download product data sheet As the moisture storage capacity of wood fibres is many times higher than that of conventional insulation materials, STEICOflex contributes to the regulation of air humidity (e.g. for interior wall insulation) - a high moisture storage capacity also prevents the rapid occurrence of free condensation. This makes the entire construction more resistant to moisture damage. Special plus: The thermal insulation properties of STEICOflex are not impaired by temporary changes in humidity. The advantages of these wood fibre insulation materials at a glance: Flexible, clampable thermal insulation Easy to process and particularly skin-friendlyOutstanding adaptation to boundary componentsExcellent insulating properties in winter and summerParticularly open to diffusion for a healthy indoor climateClimate-regulating due to high sorption capacityContributes greatly to an excellent indoor climate in terms of building biologyEcological, environmentally friendly and recyclableBuilding authority-approved thermal insulation material made from wood fibresThe insulation materials are available in the following thicknesses: 30,40,50,60,80,100,120,140,160,180,200,220 and 240mm. The packaging units are automatically displayed when you specify the quantity to make ordering easier. Please do not hesitate to contact us if you have any questions about application, processing or any other queries. Our expert team will of course be happy to help you - even after your purchase. Technical data: Dimensions (per mat): 1220 x 575 mm Bulk density: 60 kg/m³ Nominal value of thermal conductivity: 0.036 [W/(m*K)] Materials used: Wood fibre, polyolefin fibre, ammonium phosphate Storage location: BaustoffPlus central warehouse in 08606 Oelsnitz/V. Self collection: possible Dispatch: by forwarding agent Manufacturer: Steico
Content: 6.313 Square metre (€6.11 / 1 Square metre)
€38.56* €40.58*
Steico external plaster base board, duo dry, combined sarking and wall construction board, tongue and groove, board, thickness 40 mm
The "duo dry" from Steico is the universally applicable, combined underlay and plaster base board made of natural wood fibre! Manufactured using the dry process.Data sheet Processing instructionsAreas of application:- as a sarking board- as a wall construction board behind curtain walls- as a plaster-coatable wood fibre insulation board- Immediate weather protection with the provenSTEICO tongue and groove profile- Plaster-coatable wood fibre insulation board- Water-repellent and at the same time diffusion-open boardfor robust constructions- Excellent insulating properties in summer and winterand good sound insulation- Suitable for blow-in insulation, from a board thickness of 40 mm- Underlay board type: UDP-A, suitable as temporary covering
Content: 1.128 Square metre (€15.77 / 1 Square metre)
€17.79* €24.28*
Steico multi cover 5 1.50m (75m²) Walk-on vapour control layer
Vapour barrier membrane with airtight function for outdoor use For use in exterior roof and wall constructionsSpecial features:- Excellent walkability even when wet - 3-ply, coated PP fleece, grid-reinforced - 2 integrated self-adhesive zones - Airtight and resistant to driving rain - Extremely high tear resistance - Can be used as a temporary temporary coveringDiffusible, sd value 5m
Content: 75 Square metre (€2.92 / 1 Square metre)
€219.00*
Steico multi UDB 1.50m (75m²) sarking and underlay membrane
Highly diffusion-open sarking, sarking and airtight membranefor new build and renovationSpecial features: 3-ply, tear-resistant and flexible2 integrated self-adhesive zonesAirtight, highly diffusion-open and resistant to driving rainExtremely high tear resistanceFree weathering possible for up to 3 monthsFunctional layer reinforced on both sides with PP fibre fleece
Content: 75 Square metre (€3.05 / 1 Square metre)
€229.00*
Steico therm, stable thermal insulation thickness 40 mm, butt joint
Steico therm, stable thermal insulation, thickness 40 mm, butt joint- Length 135 cm, width 60 cm, thickness 40 mm- Versatile wood fibre insulation board- Particularly light and dimensionally stable, bulk density: approx. 160 kg/m³- Manufactured using the wet process- 56 pieces/pallet = 45.36 m²
Content: 0.81 Square metre (€10.69 / 1 Square metre)
€8.66*
Steico universal dry, underlay and wall construction board
- The thermally insulating sarking and wall construction board for new builds and renovations- Medium raw density profiles for a balanced combination of cold protection in winter and heat protection in summer- Reduces structural thermal bridges- Can be used from a board thickness of 35 mm in combination with STEICO blow-in insulation- Seamed underlay in accordance with ZVDH for roof pitches ≥ 16°- Underlay board type: UDP-A, suitable as temporary roofing- Ecological, environmentally friendly and recyclable like woodData sheet Topic booklet on modernising old buildings Topic booklet on new buildings Processing instructions Video roof renovation Video underlays
Content: 1.5 Square metre (€7.33 / 1 Square metre)
€11.00*
over-rafter insulation
Acoustics & Indoor Climate
Yosima – Medium-textured clay plaster
AMPACK Building Sealing
Content: 0.5 Litre (€37.60 / 1 Litre)
€18.80*
Content: 5 Linear metre (€4.17 / 1 Linear metre)
€20.87*
Content: 25 Linear metre (€2.34 / 1 Linear metre)
€58.43*
Content: 25 Linear metre (€2.59 / 1 Linear metre)
€64.80*
Content: 12 Linear metre (€0.57 / 1 Linear metre)
€6.78*
Content: 0.31 Litre (€30.29 / 1 Litre)
€9.39*
Content: 8 Linear metre (€1.60 / 1 Linear metre)
€12.82*
Content: 20 Linear metre (€5.66 / 1 Linear metre)
€113.29*
Content: 25 Linear metre (€1.25 / 1 Linear metre)
€31.33*
Content: 40 Linear metre (€1.21 / 1 Linear metre)
€48.25*
Content: 25 Linear metre (€1.83 / 1 Linear metre)
€45.71*
Content: 25 Linear metre (€1.75 / 1 Linear metre)
€43.83*
Content: 25 Linear metre (€0.86 / 1 Linear metre)
€21.44*
Content: 25 Linear metre (€1.27 / 1 Linear metre)
€31.81*
Content: 30 Linear metre (€0.73 / 1 Linear metre)
€21.91*
Content: 37.5 Square metre (€2.58 / 1 Square metre)
€96.59*
Content: 75 Square metre (€2.97 / 1 Square metre)
€223.01*
Content: 75 Square metre (€3.29 / 1 Square metre)
€246.60*
Content: 75 Square metre (€2.37 / 1 Square metre)
€177.39*
Content: 75 Square metre (€3.08 / 1 Square metre)
€231.07*
Content: 75 Square metre (€3.52 / 1 Square metre)
€264.00*
Content: 75 Square metre (€4.92 / 1 Square metre)
€368.98*
Content: 62.5 Square metre (€1.50 / 1 Square metre)
€93.70*
Content: 75 Square metre (€2.47 / 1 Square metre)
€185.12*
Content: 75 Square metre (€2.05 / 1 Square metre)
€153.43*