Ampacoll RA – Solvent-free, permanently elastic edge-sealing adhesive for vapour control layers (310 ml cartridge)
€9.39
Available, delivery time: 3-8 days
Product information "Ampacoll RA – Solvent-free, permanently elastic edge-sealing adhesive for vapour control layers (310 ml cartridge)"
Ampacoll RA – Solvent-free, permanently elastic edge-sealing adhesive for vapour control layers (310 ml cartridge)
Ampacoll RA is a solvent-free, airtight and permanently elastic liquid adhesive. It is perfectly suited for use with vapour control layers and vapour barriers in interior applications. Thanks to its acrylate copolymer formulation, the adhesive bonds to almost all substrates without the need to apply a primer beforehand.
Product features and benefits
Environmentally friendly & pleasant: The adhesive is completely solvent-free and odourless.
High compatibility: Adheres reliably to almost all standard building substrates (no priming required).
Permanently secure: Forms an airtight and permanently elastic edge junction.
User-friendly: Easy to squeeze out of the cartridge. The special notched nozzle ensures an even bead of adhesive.
- Base material: Acrylate copolymer
- Solvent: none
- Coverage: 30–50 ml per linear metre
- Application temperature: 0 °C to +50 °C
- Temperature resistance: -20 °C to +80 °C
- Setting time / drying time: 2 to 3 days
- Ageing resistance: > 20 years
- Storage: frost-free, cool and dry
Application instructions
1. Substrate preparation The substrate or surface must be sound, clean, dry and free from dust and grease.
2. Applying the adhesive Apply a continuous bead 8 to 10 mm thick to the substrate. Any depressions in the substrate should be levelled out immediately by adding an appropriate amount of material.
3. Attaching the vapour control layer Attach the vapour control layers or vapour blocks to the bead of adhesive without creating any gaps and applying only light pressure. Take care not to press the bead completely flat. A short flash-off time before pressing it down improves initial adhesion. The full curing time is 2 to 3 days.
4. Important note on edge battens Where installation is completely free of tension and load, the use of this adhesive technology is theoretically possible even without additional edge battens. However, based on practical experience and recommendations in the relevant standards, a mechanical fix (edge batten) should not be omitted for safety reasons. Furthermore, in most cases, edge battens serve to support the room-side cladding anyway.
| Areas of application: | Edge junction, Vapour barriers, Vapour control layer |
|---|---|
| Manufacturer: | Ampack |
| Packaging: | Cartridge |
| Pack size: | 0.31 l |
| Product group: | Building sealing |
| Product type: | Adhesives / Primers |
| Shipping: | Collection available, Parcel shipping |
Login