-
Insulation materials
- Sheep's wool insulation materials
- Impact sound insulation
- Flexible insulation materials
- Floor insulation
- Log cabin insulation
- Interior insulation suitable for plastering
- External insulation suitable for rendering
- Sarking and sheathing boards
- Loose-fill insulation
- Reed panels
- Over-rafter insulation
- External wall insulation
- Clay building materials
- Interior fit-out
- Room acoustics
- Surfaces
- Furnishing
- Manufacturer
- Accessories
- Guide
Save money with your personalised quote
Advice by telephone and in person
With us, you’ll receive honest, personalised and expert advice. As our roots lie in the trades, we know our products not only in theory but, above all, from over 30 years of practical experience!
Tel.: 037241 725270
Mon–Thu 7.00–16.30 / Fri 7.00–14.30
…and by appointment
(If we’re not available at the moment, please leave a message on the answering machine – we’ll ring you back!)
Interior insulation suitable for rendering
Filter products
Hiss reed insulation board, reed board, thickness 5 cm
Product information "Hiss reed insulation panel 5 cm reed panel" Stalk length 1 m, height 2 m.5 cm thick reed board for insulating buildings. Weight approx. 7 kg per square metre.Selected reed quality and high-quality strong binding made of 1.8 mm thick galvanised wire, the staples are made of 1.3 mm thick stainless steel wire.Reed insulation panels are fixed to masonry or other mineral substrates with insulation plugs. Requires approx. 7 pieces per m².The panels can also be screwed to wooden structures.Thermal insulation made of reedData sheet Video Video 2 Processing instructionsInsulating with natureMore and more environmentally conscious building owners are opting for natural insulation materials in order to make their contribution to climate protection and at the same time create a cosy and healthy indoor climate. For this reason, insulation materials made from renewable raw materials have been increasingly used again in recent years, both in new builds and renovations.What exactly are renewable raw materials?Renewable raw materials (NaWaRo) such as reed, wood, flax, cork, hemp, sheep's wool, etc. come from nature and are therefore ecological "by tradition". They are produced in an environmentally friendly and resource-saving way and require little primary energy.Zero chemicals, zero pollutants, great climateInsulation materials made from renewable raw materials (NaWaRo) are largely free of chemicals and pollutants. They compensate for fluctuations in temperature and humidity better than mineral insulating materials and offer excellent soundproofing properties in addition to thermal insulation. And they can also provide a "cool climate" inside the house in summer: plants store heat wonderfully and thus prevent rooms from heating up, which is a particularly beneficial effect under sloping roofs. Natural insulating materials are superior to their mineral competitors because they are better at equalising fluctuating temperatures and humidity while maintaining the same good insulating performance.Ecologically insulated with reedNaturally from tradition: reed is probably the oldest building material for full thermal insulation and was already used in the Neolithic Age to insulate houses against the cold. In historic buildings, there are many plasters with reed mats as supports that have lasted for several centuries. Reed is the most natural building material that environmentally conscious homeowners can think of and scores with an outstanding carbon footprint: it ranges from low energy consumption during production (the reed is only cut, pressed together and bound with stainless steel wires) to material-free recycling. This makes reed a pollutant-free alternative to rigid foam panels made of polystyrene and polyurethane, which are made from crude oil and require a great deal of energy during production. As a renewable raw material (NaWaRo), reed has special properties from its original natural habitat: as an aquatic plant, reed is extremely resistant to rotting. The high silicate content in the reeds makes them rot-proof, prevents swelling and shrinkage and ensures that reeds are difficult to ignite in plaster. Important for owners of old buildings: The breathable material, which also ensures a pleasant indoor climate and excellent sound insulation, moulds perfectly to walls that are not completely flat. Because the reeds can be moved within themselves, movements in the substrate can be easily compensated for.The natural insulating material reed is extremely versatile. It is suitable, for example, asInterior insulation of half-timbered and other housesfor external insulation as part of thermal insulation systemsas effective roof insulation on/under and between the raftersas ceiling and floor insulation Reed insulation boards are also very easy to work with: Builders can simply cut them to size themselves using a table saw or hand-held circular saw.Reed can also save financial resources: In terms of purchasing materials, reed insulation is cheaper than cork, mineral foam, wood fibre or vacuum insulation. However, the time required for installation is 6-15 minutes longer per square metre.
Content: 2 Square metre (€29.00 / 1 Square metre)
€58.00*
Steico Base, pressure-resistant floor insulation and plaster base board, thickness 20 mm
The versatile wood fibre insulation board with particularly high compressive strengthData sheet Plaster recommendation clay plaster Video- Optimum combination for heavy-duty dry and wet screed constructions- Suitable as insulation board for mastic asphalt screeds- Interior plaster base board for lime and clay plasters- Excellent insulating properties- Ecological and environmentally friendly- RecyclableDelivery formsThickness: 20 mm, 40 mm, 60 mm, 80 mmm, 1000 mm
Content: 0.81 Square metre (€8.35 / 1 Square metre)
€6.76*
STEICO internal, plaster base board for internal insulation made of wood fibres 40mm
Steico Internal plaster base board for internal insulation with tongue and grooveData sheet Planning booklet Plaster recommendation Claytec clay plastervideoWhen insulating internal walls with Steico "internal" wood fibre insulation, these insulation boards are glued to the corresponding wall with Claytec clay adhesive. Claytec clay adhesive is used for bonding and care must be taken to ensure full-surface bonding. The clay adhesive is applied to the insulation board or the wall using a notched trowel. The clay adhesive can also be applied to both sides if there are minor unevennesses to be levelled out. The insulation boards are installed in a staggered pattern. The boards are then additionally anchored in the wall using insulation dowels. The entire surface is then reinforced using reinforcing mesh and clay adhesive and reinforcing mortar. We have 3 different types of reinforcement mesh for you to choose from: Glass fibre reinforcement, jute reinforcement and flax reinforcement. Board labelling WF - EN 13171 - T4 - CS(10\ Y)50 - TR2.5 - AFr 100Nominal value thermal conductivity [W/(m*K)] 0.038Nominal value thermal resistance [(m²*K)/W] 1.05(40) / 1.55(60) / 2.10(80)Bulk density [kg/m³] approx. 160Water vapour diffusion resistance µ 5sd value [m] 0.2(40) / 0.3(60) / 0.4(80)Specific heat capacity [J/(kg*K)] 2,100Compressive strength [kPa] 50Input materials Wood fibre, layer bondingWaste code (EAK/AVV) 030105/170201, disposal like wood and wood-based materialsRated value of thermal conductivity DE [W/(m*K)] 0.04Rated value of thermal conductivity AT [W/(m*K)] 0.042Rated value of thermal conductivity CH [W/(m*K)] 0.038Fire behaviour group according to VKF fire protection guideline RF3
Content: 0.45 Square metre (€14.60 / 1 Square metre)
€6.57* €7.51*
Steico universal dry, underlay and wall construction board
- The thermally insulating sarking and wall construction board for new builds and renovations- Medium raw density profiles for a balanced combination of cold protection in winter and heat protection in summer- Reduces structural thermal bridges- Can be used from a board thickness of 35 mm in combination with STEICO blow-in insulation- Seamed underlay in accordance with ZVDH for roof pitches ≥ 16°- Underlay board type: UDP-A, suitable as temporary roofing- Ecological, environmentally friendly and recyclable like woodData sheet Topic booklet on modernising old buildings Topic booklet on new buildings Processing instructions Video roof renovation Video underlays
Content: 1.5 Square metre (€7.33 / 1 Square metre)
€11.00*
Interior insulation suitable for rendering
Acoustics & Indoor Climate
Yosima – Medium-textured clay plaster
AMPACK Building Sealing
Content: 0.5 Litre (€37.60 / 1 Litre)
€18.80*
Content: 5 Linear metre (€4.17 / 1 Linear metre)
€20.87*
Content: 25 Linear metre (€2.34 / 1 Linear metre)
€58.43*
Content: 25 Linear metre (€2.59 / 1 Linear metre)
€64.80*
Content: 12 Linear metre (€0.57 / 1 Linear metre)
€6.78*
Content: 0.31 Litre (€30.29 / 1 Litre)
€9.39*
Content: 8 Linear metre (€1.60 / 1 Linear metre)
€12.82*
Content: 20 Linear metre (€5.66 / 1 Linear metre)
€113.29*
Content: 25 Linear metre (€1.25 / 1 Linear metre)
€31.33*
Content: 40 Linear metre (€1.21 / 1 Linear metre)
€48.25*
Content: 25 Linear metre (€1.83 / 1 Linear metre)
€45.71*
Content: 25 Linear metre (€1.75 / 1 Linear metre)
€43.83*
Content: 25 Linear metre (€0.86 / 1 Linear metre)
€21.44*
Content: 25 Linear metre (€1.27 / 1 Linear metre)
€31.81*
Content: 30 Linear metre (€0.73 / 1 Linear metre)
€21.91*
Content: 37.5 Square metre (€2.58 / 1 Square metre)
€96.59*
Content: 75 Square metre (€2.97 / 1 Square metre)
€223.01*
Content: 75 Square metre (€3.29 / 1 Square metre)
€246.60*
Content: 75 Square metre (€2.37 / 1 Square metre)
€177.39*
Content: 75 Square metre (€3.08 / 1 Square metre)
€231.07*
Content: 75 Square metre (€3.52 / 1 Square metre)
€264.00*
Content: 75 Square metre (€4.92 / 1 Square metre)
€368.98*
Content: 62.5 Square metre (€1.50 / 1 Square metre)
€93.70*
Content: 75 Square metre (€2.47 / 1 Square metre)
€185.12*
Content: 75 Square metre (€2.05 / 1 Square metre)
€153.43*