Primers / Substrates
Chalk time alcohol
Kreidezeit Alcohol (ethyl alcohol, wine spirit) is a fermented alcohol which is distilled from the fermentation of plant parts containing sugar or starch, following the addition of a specific yeast (as in beer or wine production). Product information Safety data sheet The product has numerous applications. For example, Kreidezeit products dissolved in alcohol (e.g. shellac isolating primer) can be diluted, and tools soiled with such substances can also be cleaned with it. It is also ideal for stain removal and degreasing surfaces. Furthermore, it can be used to remove mould and to dissolve alcohol-soluble natural resins such as shellac and copal. For tax reasons, so-called denaturants are added to alcohol intended for technical applications; these render it undrinkable or, if swallowed, cause immediate vomiting, as a spirits duty is levied on pure alcohol when used as a beverage.Full composition Ethyl alcohol (96%), isopropanol, Bitrex, methyl ethyl ketone
Content: 0.5 Litre (€15.00 / 1 Litre)
€7.50*
Claytec primer, "DIE GELBE", with fine grain, 10 litres
Liquid primer with fine grain size before applying fine clay finishing plaster and YOSIMA clay design plaster. The YELLOW provides a fine-grained grip, reduces and equalises absorbency and protects plasterboard and other building boards from moisture from the clay plaster application.Data sheet fine surfaces YosimaCompositionLimestone powder, water, water glass, clay, dispersion < 5% (improves adhesion properties and application safety), perlite, cellulose fibres, methyl cellulose, xanthan gum. Grain size 0-1 mmDelivery forms, yield10 litre bucket, fluid, for approx. 50 m2.5 litre bucket, fluid, for approx. 25 m2.StorageCan be stored in closed containers in a dry and cool place (frost-free!) for at least one year. Tightly reseal opened containers.PreparationAs a rule, whisk up thoroughly undiluted; up to 5% water can be added.SubstrateThe substrate must be sound, solid and clean. Substrate temperature 5-25 °C. Remove old, poorly adhering coats, wash off water-soluble coats. Brush off sanding plasters and rinse. Prepare heavily sanding substrates with CLAYTEC Deep Primer and Strengthener. Fresh gypsum, lime or cement plasters must be at least 10 days old and dry. Highly alkaline substrates, such as fresh concrete surfaces with sintered skin, must be professionally fluated (neutralised) and formwork oil residues washed off. CLAYTEC primers have no strengthening or blocking effect.ApplicationThe primer is applied generously over the entire surface using a short pile roller or brush.DryingThe following application is only possible after complete drying, at the earliest after 48 hours. Drying depends on temperature and humidity.
€88.94* €98.83*
Claytec primer, "DIE ROTE", coarse grain, 5 litres
Liquid primer with coarse grain prior to the application of coarse clay plaster mortars. The RED provides grip and plaster adhesion on smooth and/or poorly absorbent substrates such as high-insulation bricks, KS elements, concrete, lime and gypsum plasters, old dispersion paints (solid but porous), old synthetic resin plasters and others.Data sheet Yosima undercoat plaster Clay plasters worksheetCompositionLimestone powder, water, water glass, clay, dispersion < 5% (improves adhesion properties and application safety), perlite, cellulose fibres, methyl cellulose, xanthan gum. Grain size 0-1.8 mmDelivery forms, yield10 litre bucket, fluid, for approx. 30 m²5 litre bucket, fluid, for approx. 15 m²StorageCan be stored in closed containers in a dry and cool place (frost-free!) for at least one year. Tightly reseal opened containers.PreparationAs a rule, whisk up thoroughly undiluted; up to 5% water can be added.SubstrateThe substrate must be sound, solid and clean. Substrate temperature 5-25 °C. Remove old, poorly adhering coats, wash off water-soluble coats. Brush off sanding plasters and rinse. Prepare heavily sanding substrates with CLAYTEC Deep Primer and Strengthener. Fresh gypsum, lime or cement plasters must be at least 10 days old and dry. Highly alkaline substrates, such as fresh concrete surfaces with sintered skin, must be professionally fluated (neutralised) and formwork oil residues washed off. CLAYTEC primers have no strengthening or blocking effect.ApplicationThe primer is applied generously over the entire surface using a short pile roller or brush.
Content: 5 Litre (€8.90 / 1 Litre)
€44.49*
Kreidezeit casein primer
Kreidezeit casein primer has a wide range of applications. This colourless, transparent primer can be used for subsequent coats of paint, as well as for Kreidezeit lime paints, plasters and casein paints in interior applications.Product information Safety data sheetThe major advantage of this primer is that it does not reduce the vapour permeability of plasters (sD value < 0.01 m), making it ideally suited for clay and lime plasters.The product reduces the absorbency of highly absorbent substrates and evens out differences in absorbency between substrates.Areas of applicationSuitable for use on all untreated and absorbent substrates such as clay, lime, lime-cement and gypsum plasters, plasterboard and gypsum fibre boards, stone and concrete. Recommended for priming absorbent existing coatings prior to renovation: e.g. Kreidezeit casein paints, clay paints, lime putty paints and emulsion paints. Not suitable for any smooth, non-absorbent surfaces or substrates subject to persistent damp. For the transparent consolidation of plasters, particularly clay plasters in interior applications; test areas must be applied in such cases.Further use of the product within paint and plaster systems is described in the relevant product information.PropertiesPowder to be mixed with waterReduces the absorbency of highly absorbent substrates and evens out variations in the substrate’s absorbencyStrengthens substrates prone to slight sandingExcellent penetrationColourless, transparentEasy to applygoes a long wayHighly vapour-permeablefree from preservativesPaint residues are compostableFull list of ingredientsCasein, sodaMixing the casein primerA 10-litre bucket and a mixing device (drill + whisk) are best suited for mixing the casein primer. Add the contents of the casein primer sachet (250 g) to 3 litres of clean, cold water, stirring constantly. Make sure that all lumps are stirred out. After leaving it to soak for approx. 30 minutes, stir thoroughly once more and dilute with 5 litres of water. ApplicationApply the casein primer evenly and generously. Apply only as much liquid as the substrate can absorb. Any excess (wet, glossy patches) must be wiped off with a cloth before it dries. Application temperature: at least 8°C. The mixed primer must be used on the same day. Under no circumstances should primer with a foul or putrid odour be used: risk of persistent odour problems even after drying! Drying time in normal conditions Dried after approx. 8 hours at 20°C and ready for overcoating with lime or casein-based paints or plasters. Suitable tools Suitable tools include good-quality natural-bristle façade and ceiling brushes. Do not spray casein primer or apply it with a roller. You will find good-quality façade and ceiling brushes in our range. Façade paintbrush, lime paintbrush, ceiling brushCleaning the tools with water immediately after use.
Content: 0.25 Kilogram (€54.80 / 1 Kilogram)
€13.70*
Kreidezeit garden furniture oil
Kreidezeit Garden Furniture Oil is made from natural and renewable raw materials. It is designed as an initial treatment for new garden furniture and can also be used for routine maintenance and to refresh wood that has already been oiled. The biocide-free Kreidezeit Garden Furniture Oil is dirt- and water-repellent, has excellent penetration and high diffusibility.Product information Safety data sheetThe garden furniture oil is colourless. It penetrates deep into the wood, revives the colour and brings out the wood grain.If required, pigments can be added to the garden furniture oil so that untreated wood is protected against greying and greyed wood can be restored to its original colour. Not suitable for treating varnished surfaces.PropertiesDirt- and water-repellentcontains solvents, very economicaldoes not crack or become brittlebreathable, antistatic, warm to the touchtransparent, honey-coloured, enhancingExcellent penetrationeasy to apply, easy to repairsuitable for children’s toys in accordance with EN 71-3saliva- and sweat-resistant in accordance with DIN 53160free from biocidesfree from cobalt, lead and bariumveganFull list of ingredientsLinseed oil, linseed oil stand oil, wood oil stand oil, rosin glycerine ester, balsam turpentine oil, manganese drierApplicationShake the product briefly before use. On untreated wood, apply Kreidezeit Garden Furniture Oil twice, allowing the surface to dry in between coats. Light sanding may be required before the second coat.Mix containers with different batch numbers together before use. Do not pour the product onto surfaces!Clean and dust off untreated surfaces.Kreidezeit Garden Furniture Oil is ready to use and is applied undiluted. Please note: Garden furniture should be fitted with rust-proof metal screws and fittings; otherwise, dark discolouration may occur when the oil is reapplied.1. Initial sandingSand new and weathered wood (grain size P 80–100) and round off the edges. Do not sand any finer than this, as the wood will otherwise become compacted and may not absorb enough oil. It is better to ‘open up’ new, smooth, planed or finely pre-sanded wood by sanding. Remove all dust thoroughly after sanding.2. First coatApply Kreidezeit Garden Furniture Oil evenly with a brush, cloth or sponge. After 10–20 minutes, rub the entire treated area thoroughly with a dry, lint-free cloth until the surface has an even, silk-matt finish. When wiping, ensure that any oil that has not been absorbed is completely removed, as otherwise shiny or sticky patches may remain. Kreidezeit Garden Furniture Oil must penetrate the wood completely and must not form a film on the surface. 3. Intermediate sanding (optional) Intermediate sanding is only necessary if the surface has dried rough after the first coat, e.g. due to raised wood fibres. Sand with sandpaper (grain size P 100–120) in the direction of the grain. Remove all dust thoroughly after sanding. 4. Second coatRepeat the procedure as for the first coat. Drying time Dry and ready for recoating at 20 °C and 60 per cent relative humidity after approx. 24 hours (or 48 hours on tannin-containing substrates, such as oak, etc.). Suitable tools Varnish brushes, solvent-compatible sponges, cotton clothsCleaning the tools Wash immediately after use with balsam turpentine oil, then rinse with Olive Care Soap or Corfu Soap.
Content: 0.5 Litre (€25.60 / 1 Litre)
€12.80*
Kreidezeit linseed oil varnish, solvent-free
Kreidezeit linseed oil varnish is a solvent-free surface protection product that can be used indoors on low-traffic wooden surfaces such as furniture, doors, beams, panelling and much more. The product can also be used as a primer for Kreidezeit stand oil paints and wood glazes. Product information Safety data sheet The key ingredient is linseed oil, which is extracted from the flax plant by cold-pressing its seeds under high pressure. The oil yield can be as high as 90 per cent. Although linseed oil does dry when exposed to oxygen, it takes several weeks to dry thoroughly; for this reason, drying agents are added to the linseed oil to reduce this time to 24–48 hours.Areas of applicationUsed undiluted as a solvent-free surface protection for low-traffic wooden surfaces indoors; classic oiled finish: furniture, doors, beams, panelling, and much more. Suitable as a primer for subsequent coats of: opaque stand oil paints on all untreated woods pigmented wood stains on highly absorbent or weathered woodsTo do this, dilute linseed oil varnish in a 1:1 ratio with balsam turpentine oil (Item 447) (=> half-oil).For the production of oil paints according to your own recipes. When applying to very dense, low-absorbent and tannin-rich wood species, slight dilution with natural balsam turpentine oil is recommended. Linseed oil guarantees a long ‘open’ working time and, thanks to its small molecular size, penetrates deeply even into the smallest wood pores. This enables excellent bonding between the substrate and subsequent oil coats.Propertiesdirt- and water-repellentresin-free, solvent-freevery good bonding with subsequent oil-based coatsdoes not crack or become brittleVapour-permeable, antistatic, warm to the touchtransparent, honey-coloured, enhancingExcellent penetrationeasy to apply, easy to repairsuitable for children’s toys in accordance with EN 71-3saliva- and sweat-resistant in accordance with DIN 53160cobalt-, lead- and barium-freeveganFull list of ingredients Linseed oil, manganese drierSurface preparation / initial sandingRemove resin blisters and old synthetic resin-based coatings. Sand new and weathered timber (grain size P 80–100), rounding off the edges. Do not sand any finer, as this will compact the wood and prevent it from absorbing enough oil. It is better to ‘open up’ new, smooth, planed or finely pre-sanded timber by sanding. Remove all dust thoroughly after sanding.ApplicationShake the product briefly before use.Kreidezeit linseed oil varnish is applied once or twice, allowing the surface to dry in between coats. Intermediate sanding may be necessary before the second coat. Mix containers from different batch numbers together before use. The product must not be poured onto surfaces!Clean and dust untreated substrates.To ensure good penetration, it is recommended to dilute the product with at least 20% balsam turpentine oil for the first coat on very dense, low-absorbent and tannin-rich woods (e.g. oak).Please note: Wood used outdoors should be fitted with stainless steel screws and fittings; otherwise, dark discolouration may occur when the surface is treated with oil. Application and drying temperature: at least 10 °C for at least 48 hours. 1. First coat Apply Kreidezeit linseed oil varnish evenly using a brush, short-pile roller, cloth or sponge. After 10–20 minutes, rub the entire treated area thoroughly with a dry, lint-free cloth until the surface has an even, silk-matt finish.When wiping, ensure that any oil that has not been absorbed is completely removed, as otherwise shiny or sticky patches may remain. Kreidezeit linseed oil varnish must penetrate the wood completely and must not form a film on the surface. 2. Intermediate sanding (optional) Intermediate sanding is only necessary if the surface has dried rough after the first coat, e.g. due to raised wood fibres. Sand with sandpaper (grain size P 100–120) in the direction of the grain. Remove all dust thoroughly after sanding. 3. Second coat (optional) A second coat may be necessary if used on its own indoors, or if a subsequent coat of stand oil paint is required on highly absorbent or weathered wood. Repeat the process as for the first coat. 4. Subsequent coats For subsequent coats, follow the product instructions for stand oil paint or wood stain. 5. Wax treatment Oiled surfaces generally do not require a wax treatment. To enhance the sheen, a final treatment with Kreidezeit Carnauba Wax Emulsion may be carried out after at least 48 hours. To do this, dilute 1 part emulsion with 2 parts water, apply evenly and thinly, allow to dry and polish as required.Drying time Dry and ready for further work at 20 °C and 60% relative humidity after approx. 24 hours (or 48 hours on tannin-containing substrates, such as oak, etc.). High humidity, cold temperatures and tannin-containing substrates significantly prolong the drying time. Fully cured after approx. 4 weeks. During this time, use with care and protect from water. Suitable toolsVarnish brushes / flat brushes, short-pile rollers (Magic Felt, item 6517), lint-free cloths, solvent-resistant plastic sponges Cleaning the toolsWash immediately after use with balsam turpentine oil, then rinse with olive care soap or Corfu soap.NoteDue to the natural oil content, a dark yellowing may occur on surfaces with little exposure to light. A characteristic odour is emitted whilst the natural oils are drying, but this will dissipate over time. Any iron filings left on the surface may cause discolouration when the product is reapplied. Not recommended for use on the interior surfaces of closed cupboards; these are best treated with shellac varnish, carnauba wax emulsion or Corfu soap.To tint the product, Kreidezeit linseed oil varnish can be mixed with Kreidezeit earth and mineral pigments; to do this, first mix the pigments with a small amount of the linseed oil varnish and only then add them to the total volume. Instructions
Content: 0.5 Litre (€15.80 / 1 Litre)
€7.90*
Kreidezeit mould first aid kit
Kreidezeit Mould First Aid Kit – Eco-friendly emergency treatment for mould infestations The eco-friendly Kreidezeit Mould First Aid Kit is free from biocides and contains everything needed to tackle minor mould infestations.Minor mould infestations are found in the majority of modern homes and can lead to significant health problems. According to the World Health Organisation (WHO), residents of such homes face an increased risk of respiratory infections and asthma, as well as developing allergies. The Kreidezeit Mould First Aid Kit offers a simple solution to this problem. The pack contains entirely eco-friendly, vegan products that are also free from plastic and biocides, and can be used for the consistent prevention and control of mould. Contents: 500 ml Kreidezeit Alcohol 250 ml Mould Buster 1 litre of lime putty paint 1 pair of rubber gloves 1 pair of safety goggles 1 professional flat brush (50 mm) 1 mould information leafletProduct information: Alcohol Safety data sheet: Alcohol Product information: Mould Buster Safety data sheet: Mould Buster Product information on lime putty paint Safety data sheet for lime putty paint Our biocide-free solutionAlcohol removes small mould stains with a one-off treatment. Our pure alcohol can dissolve and remove mould stains quickly and with minimal effort. The fungus is removed from the surface, but this is only a ‘first aid’ measure. Treatment should then be continued as soon as possible using the following products: Mould Buster encapsulates spores, binds them permanently and thus protects against their further spread. At the same time, the surface becomes highly alkaline, which prevents new growth. Schimmelknacker does not cover the surface with colour and should be painted over with lime putty paint when the opportunity arises. It adheres to almost any surface and is also suitable, for example, for treating affected cabinet backs. It remains effective for many months. Due to its long-lasting alkalinity, lime is most effective against fungi. Lime paints are our tried-and-tested solution for the permanent removal and colour-concealment of mould. Two coats are usually sufficient to prevent the mould from returning. Our recommendations apply to fungal infestation covering a maximum of 5 m². In the event of severe infestation affecting entire rooms or even buildings, a specialist should be consulted. If in doubt, you can discuss your situation with our technical advisers. Structural defects and specific building characteristics may impair the effectiveness of the products described.
€40.00*
Kreidezeit Shellac Insulating Primer
The Kreidezeit Shellac Insulating Primer is a primer that cures and is used to block through-staining caused by water, rust, soot or nicotine on all absorbent wall and ceiling surfaces, such as plaster, wallpaper, wood and wood-based materials. Product information Safety data sheet Shellac is a natural resin obtained from the secretion of female scale insects, which secrete it onto twigs to protect their offspring. This secretion is then harvested twice a year from the shrubs – which are primarily found in East India and Thailand – yielding different grades of quality. This so-called ‘stock lacquer’ contains 60–80 per cent pure shellac. This results in numerous applications in the pharmaceutical industry (coating for coated tablets), in insulating paints, wood polishes, fabric finishes, chewing gum, inks and much more. Kreidezeit Shellac Insulating Primer can be painted over with Kreidezeit wall paints if required; however, it is unsuitable for use with lime-based plasters and should not be used on damp substrates or where moisture is penetrating. PropertiesInsulating and sealingwhite, opaque, matt provides good grip due to slight surface roughness Quick-drying vapour-tight, non-absorbent easy to apply and economical Can be painted over with many types of paint Full list of ingredients Fermentation alcohol (denatured with MEK, IPA, Bitrex), wax-free shellac, linseed oil varnish, titanium white, talc, quartz, silicic acidApplicationRemove any dirt from the substrate as far as possible (brush off, wash off). Stir the product thoroughly before use and apply a thin, even coat to the dry surface using a brush or roller. One coat is usually sufficient to seal minor stains; for heavy stains, apply 2–3 coats, allowing the surface to dry between coats and without sanding in between.Can be overpainted with Kreidezeit wall paints after approx. 24 hours. For subsequent coats of white wall paint, the isolating primer can be applied selectively. For subsequent coats of coloured wall paint, or coats to be finished with wall glazes, the isolating primer must be applied over the entire surface; otherwise, coloured marks may appear. If glossy patches have formed due to the primer being applied too thickly, the dried shellac isolating primer must be sanded to a matt finish before painting over with wall paints. The product may be thinned with Kreidezeit alcohol up to 10 % vol.Drying timeDust-dry after approx. 30 minutes. Dry and ready for further work after approx. 12 hours at 20 °C.Cleaning of toolsClean immediately after use with alcohol, then wash with Marseille soap, Corfu soap or olive care soap and water.
Content: 0.375 Litre (€42.93 / 1 Litre)
€16.10*
Primers / Substrates
Acoustics & Indoor Climate
Yosima – Medium-textured clay plaster
AMPACK Building Sealing
Content: 0.5 Litre (€37.60 / 1 Litre)
€18.80*
Content: 5 Linear metre (€4.17 / 1 Linear metre)
€20.87*
Content: 25 Linear metre (€2.34 / 1 Linear metre)
€58.43*
Content: 25 Linear metre (€2.59 / 1 Linear metre)
€64.80*
Content: 12 Linear metre (€0.57 / 1 Linear metre)
€6.78*
Content: 0.31 Litre (€30.29 / 1 Litre)
€9.39*
Content: 8 Linear metre (€1.60 / 1 Linear metre)
€12.82*
Content: 20 Linear metre (€5.66 / 1 Linear metre)
€113.29*
Content: 25 Linear metre (€1.25 / 1 Linear metre)
€31.33*
Content: 40 Linear metre (€1.21 / 1 Linear metre)
€48.25*
Content: 25 Linear metre (€1.83 / 1 Linear metre)
€45.71*
Content: 25 Linear metre (€1.75 / 1 Linear metre)
€43.83*
Content: 25 Linear metre (€0.86 / 1 Linear metre)
€21.44*
Content: 25 Linear metre (€1.27 / 1 Linear metre)
€31.81*
Content: 30 Linear metre (€0.73 / 1 Linear metre)
€21.91*
Content: 37.5 Square metre (€2.58 / 1 Square metre)
€96.59*
Content: 75 Square metre (€2.97 / 1 Square metre)
€223.01*
Content: 75 Square metre (€3.29 / 1 Square metre)
€246.60*
Content: 75 Square metre (€2.37 / 1 Square metre)
€177.39*
Content: 75 Square metre (€3.08 / 1 Square metre)
€231.07*
Content: 75 Square metre (€3.52 / 1 Square metre)
€264.00*
Content: 75 Square metre (€4.92 / 1 Square metre)
€368.98*
Content: 62.5 Square metre (€1.50 / 1 Square metre)
€93.70*
Content: 75 Square metre (€2.47 / 1 Square metre)
€185.12*
Content: 75 Square metre (€2.05 / 1 Square metre)
€153.43*