Steico "flex" 036/ 30-240mm thickness / flexible ecological wood fibre insulation, 1220x575mm / pack 6.3135 m²

Simple saw for cutting our Steico_flex wood fibre insulation to size

AdvantagesSticks securely - even in damp conditions: waterproof SOLID adhesiveBecomes virtually invisible: black backing fleece not visible behind gap formworkHolds reliably in the long term: UV-stable behind gap formworkMore flexible further work: 6 months freely weatherableEasy to apply: Fleece backing very pliable and can be torn off by handFaster further work: Fleece backing can be plastered over directlyStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, tested in accordance with AgBB / ISO 16000Product information Processing instructionsApplicationExterior: Creation of windtightness of wall formwork membranes with pro clima SOLITEX FRONTA family as well as sarking and underlay membranes. Windtight bonding of wood-based panels as underlay. Airtight bonding of on-roof and renovation vapour barriers and airtight membranes.Indoors: Airtight bonding of vapour barriers and airtight membranes as well as airtight wood-based panels.All interior and exterior bonding can be carried out both to each other and to neighbouring smooth, non-mineral components (e.g. pipe penetrations, skylights).Division of the separating film forWidth 100 mm: 50 / 50 mmWidth 150 mm: 75 / 75 mmGeneral conditionsBonds must not be subjected to tensile loads.After bonding the sheets, battens must support the weight of the insulation material. Secure bonding with battens if necessary.Rub the adhesive tapes down firmly. Ensure sufficient counter pressure.Windproof, airtight or rainproof bonding can only be achieved on vapour control layers or sarking and façade membranes laid without folds.Quickly dissipate increased room humidity by consistent and constant ventilation, if necessary set up a building dryer.When plastering, please follow the recommendations of the plaster manufacturer for non-absorbent substrates. A bonding bridge may be required.SubstratesClean substrates before bonding. Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Substrates must be sufficiently dry and stable. Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour control layers and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET). Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards). Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates. You are responsible for checking the suitability of the substrate; test bonding may be recommended. Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.

For fast and permanently tight cable entry through the airtight layer. Can also be used outdoors, e.g. for under-roofing or renovation vapour barriers.Data sheet Processing instructions Processing videoAdvantagesKeeps building components dry: quick and easy sealingSecure connection thanks to waterproof SOLID adhesivePractical working: Cables can be pushed and pulled in the sleeve - the connection remains tightExtremely flexible and stretchable, no protruding grommetMore flexible further work: Can be exposed to the weather for 6 monthsStandard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. greases or silicones). Substrates must be sufficiently dry and stable.Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.General conditionsAdhesive bonds must not be subjected to tensile loads.Rub adhesive tapes firmly. Ensure sufficient counter pressure.Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds.Quickly remove increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.

AdvantagesSticks securely - even in damp conditions: waterproof SOLID adhesiveParticularly durable: 100 years of adhesive strength independently tested and confirmedContinue working more flexibly: can be freely weathered for 6 monthsContinue working faster: Fleece backing can be plastered over directlyEasy to process: Fleece backing is very pliable and can be torn off by handTest winner at Stiftung Warentest 4/2012Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000Data sheet Processing instructions 100 years of adhesive strength ApplicationIndoors: Airtight bonding of vapour barriers and airtight membranes as well as airtight wood-based panels.Exterior: Ensuring wind and rain tightness of sarking, sarking and wall formwork membranes (e.g. pro clima SOLITEX) and sarking panels.Airtight bonding of on-roof and renovation vapour barriers and airtight membranes.All interior and exterior bonding can be carried out both to each other and to neighbouring smooth, non-mineral components (e.g. pipe penetrations, skylights).General conditionsBonds must not be subjected to tensile loads.After bonding membranes, battens must support the weight of the insulation material. Secure bonded joints with battens if necessary.Rub adhesive tapes down firmly. Ensure sufficient counter pressure. Windproof, airtight or rainproof bonds can only be achieved on vapour control layers or sarking and façade membranes laid without folds. Quickly dissipate increased room humidity by consistent and constant ventilation, if necessary set up a building dryer.When plastering, please follow the recommendations of the plaster manufacturer for non-absorbent substrates. A bonding bridge may be required.SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Substrates must be sufficiently dry and stable. Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour barrier and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).Bonding and connections can be made on planed and painted wood, hard plastics or metal (e.g. pipes, windows, etc.), hard wood-based panels (chipboard, OSB and BFU, MDF and wood fibre underlay boards).Pre-treatment with TESCON PRIMER is required when bonding wood fibre underlay boards or on smooth, mineral substrates. Concrete or plaster substrates must not sand.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.

Advantages- Saves time: no plaster reinforcement required- Defined transition between vapour barrier and plaster- Secure connection: Reinforcing mesh increases the stability of the adjacent plaster substrate- Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2- Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000Data sheet Processing instructionsApplicationFor defined cross-trade connections of membranes or wood-based panels to components to be plastered (masonry or concrete).General conditionsAdhesive bonds must not be subjected to tensile loads.Apply adhesive tapes firmly. Ensure sufficient counter pressure.Airtight bonding can only be achieved by installing the connecting tape without creases and without interruption.Quickly dissipate increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.When plastering, please follow the plaster manufacturer's recommendations for non-absorbent substrates. A bonding bridge may be required.If the airtight connection is only made after plastering, moisture may enter the thermal insulation or disrupt the construction process.CONTEGA PV minimises this problem.SubstratesClean substrates before bonding.Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Remove peeling old coatings or similar. Substrates must be sufficiently dry and stable.Permanent bonding is achieved on all pro clima inner membranes and other vapour control layers and airtight membranes (e.g. made of PE, PA, PP and aluminium).Bonding can be carried out on planed and painted wood, hard plastics, hard wood-based panels (chipboard, OSB and BFU boards).The PET fleece can be embedded in the plaster centre layer on all plasterable substrates such as brick, sand-lime brick, aerated concrete, pumice, concrete, etc.Use ORCON F for bonding to masonry, concrete or rough substrates.The best results for the safety of the construction are achieved on high-quality substrates.You are responsible for checking the suitability of the substrate; test bonding may be recommended.Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.