Pro Clima, Contega PV, vapour-retarding plaster connection tape with reinforcement fabric, roll 15 m, width 200 mm
ProClima
Regular price:
€41.20
Content:
15 Linear metre
(€2.75 / 1 Linear metre)
Available in 5 days, delivery time 2-5 days
Product number:
SW10146
Product information "Pro Clima, Contega PV, vapour-retarding plaster connection tape with reinforcement fabric, roll 15 m, width 200 mm"
Advantages
- Saves time: no plaster reinforcement required
- Defined transition between vapour barrier and plaster
- Secure connection: Reinforcing mesh increases the stability of the adjacent plaster substrate
- Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2
- Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000
Application
For defined cross-trade connections of membranes or wood-based panels to components to be plastered (masonry or concrete).
General conditions
Adhesive bonds must not be subjected to tensile loads.
Apply adhesive tapes firmly. Ensure sufficient counter pressure.
Airtight bonding can only be achieved by installing the connecting tape without creases and without interruption.
Quickly dissipate increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.
When plastering, please follow the plaster manufacturer's recommendations for non-absorbent substrates. A bonding bridge may be required.
If the airtight connection is only made after plastering, moisture may enter the thermal insulation or disrupt the construction process.
CONTEGA PV minimises this problem.
Substrates
Clean substrates before bonding.
Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Remove peeling old coatings or similar. Substrates must be sufficiently dry and stable.
Permanent bonding is achieved on all pro clima inner membranes and other vapour control layers and airtight membranes (e.g. made of PE, PA, PP and aluminium).
Bonding can be carried out on planed and painted wood, hard plastics, hard wood-based panels (chipboard, OSB and BFU boards).
The PET fleece can be embedded in the plaster centre layer on all plasterable substrates such as brick, sand-lime brick, aerated concrete, pumice, concrete, etc.
Use ORCON F for bonding to masonry, concrete or rough substrates.
The best results for the safety of the construction are achieved on high-quality substrates.
You are responsible for checking the suitability of the substrate; test bonding may be recommended.
Pre-treatment with TESCON PRIMER is recommended for non-load-bearing substrates.
| Areas of application: | Base coat plaster, Clay and drylining boards, Clay plaster, Interior fit-out, Interior plaster, Lime plasters, Reinforcement, Wall coating |
|---|---|
| Length: | 15 m |
| Manufacturer: | Proclima |
| Packaging: | Roll |
| Pack size: | Roll 15 m |
| Product category: | Accessories, Clay building materials, Interior fit-out, Paints/Plasters, Straw boards, Wall |
| Product line: | Pro Clima, Contega PV, plaster connection tape |
| Shipping: | Collection available, Freight shipping, Parcel shipping |
| Width: | 20 cm |
Login
No reviews found. Share your insights with others.