Pro Clima, ORCON F, all-round connection adhesive for indoors and outdoors, 310 ml cartridge
ProClima
Regular price:
€9.14
Content:
0.315 Litre
(€29.02 / 1 Litre)
Available in 5 days, delivery time 2-5 days
Product number:
01-orconF
Product information "Pro Clima, ORCON F, all-round connection adhesive for indoors and outdoors, 310 ml cartridge"
- Creation of airtight connections for all types of vapour control layers and airtight membranes. This includes all pro clima vapour control layers and airtight membranes (e.g. pro clima INTELLO, DB+, INTESANA, DASATOP and DA).
- Bonding windtight connections of all types of sarking and underlay membranes (PP, PET). The connection bonding of e.g. pro clima SOLITEX MENTO family, SOLITEX UD, SOLITEX PLUS and SOLITEX UM connect complies with the requirements of the ZVDH product data sheets.
- Windproof bonding of wall formwork membranes (e.g. pro clima SOLITEX FRONTA family).
- Bonding of overlaps and connections of trickle protection membranes.
Application
Creation of airtight connections of all types of vapour control layers and airtight membranes. This includes all pro clima vapour control layers and airtight membranes (e.g. pro clima INTELLO, DB+, INTESANA, DASATOP and DA).
Bonding windproof connections of all types of underlay and underlay membranes (PP, PET). The connection bonding of e.g. pro clima SOLITEX MENTO family, SOLITEX UD, SOLITEX PLUS and SOLITEX UM connect fulfils the requirements of the ZVDH product data sheets.
Windproof bonding of wall formwork membranes (e.g. pro clima SOLITEX FRONTA family).
Bonding of overlaps and connections of trickle protection membranes.
Advantages
Bonds securely even in frost: can be applied from -10 °C
Particularly durable: 100 years of adhesive strength independently tested and confirmed
Provides a firm and permanently elastic hold
Ensures secure connections: Penetrates deep into the substrate, remains elastic
Test winner at Stiftung Warentest 4/2012
Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2
Can be stored down to -20 °C. Material does not freeze in the cartridge
Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000
Consumption values
Delivery form Contents Bead Range
Cartridge 310 ml 5 mm ~ 15 m
Advantages
Bonds securely even in frost: can be used from -10 °C
Particularly durable: 100 years of adhesive strength independently tested and confirmed
Provides a firm and permanently elastic hold
Ensures secure connections: Penetrates deep into the substrate, remains elastic
Test winner at Stiftung Warentest 4/2012
Standard-compliant construction: For airtight connections in accordance with DIN 4108-7, SIA 180 and OENORM B 8110-2
Can be stored down to -20 °C. Material does not freeze in the cartridge
Best values in the pollutant test, test carried out in accordance with AgBB / ISO 16000
Application
Creation of airtight connections for all types of vapour control layers and airtight membranes. This includes all pro clima vapour control layers and airtight membranes (e.g. pro clima INTELLO, DB+, INTESANA, DASATOP and DA).
Bonding windproof connections of all types of underlay and underlay membranes (PP, PET). The connection bonding of e.g. pro clima SOLITEX MENTO family, SOLITEX UD, SOLITEX PLUS and SOLITEX UM connect fulfils the requirements of the ZVDH product data sheets.
Windproof bonding of wall formwork membranes (e.g. pro clima SOLITEX FRONTA family).
Bonding of overlaps and connections of trickle protection membranes.
General conditions
Bonds must not be subjected to tensile loads.
The final strength is only achieved when dry. This must be taken into account for subsequent airtightness measurements and/or the installation of blown-in insulation materials. If necessary, securing measures, e.g. mechanical securing of non-load-bearing substrates, are recommended.
Quickly dissipate increased room humidity through consistent and constant ventilation, if necessary set up a building dryer.
Substrates
Clean substrates before bonding. Mineral surfaces (plaster or concrete) may be slightly damp.
Bonding is not possible on frozen substrates. There must be no repellent substances on the materials to be bonded (e.g. grease or silicone). Substrates must have sufficient load-bearing capacity - if necessary, a mechanical securing device (pressure bar) must be used (e.g. for sanding substrates).
Permanent bonding is achieved on all pro clima interior and exterior membranes, other vapour control layers and airtight membranes (e.g. made of PE, PA, PP and aluminium) or sarking/sarking membranes and wall formwork membranes (e.g. made of PP and PET).
Connections can be made on mineral substrates (e.g. plaster or concrete), rough-sawn and planed wood as well as hard wood-based panels (chipboard, OSB, BFU, MDF).
The best results for the safety of the construction are achieved on high-quality substrates.
It is your own responsibility to check the suitability of the substrate; test bonding may be recommended.
| Areas of application: | Between rafter insulation, Clay and drylining boards, Edge insulation strips, External wall insulation, Insulation of intermediate floors, Interior fit-out, Joint insulation, Substrate preparation / priming |
|---|---|
| Manufacturer: | Proclima |
| Packaging: | Cartridge |
| Pack size: | Cartridge 310 ml |
| Product category: | Accessories, Interior fit-out, Roof, Straw boards, Wall, Window products |
| Product group: | Paints and primers, Window products |
| Product line: | Pro Clima Orcon F |
| Shipping: | Collection available, Freight shipping, Parcel shipping |
Login
No reviews found. Share your insights with others.