Skip to main content Skip to search Skip to main navigation

Pro Clima, SOLITEX FRONTA QUATTRO, wall formwork sheeting for gap formwork up to 35 mm, roll 50 m

Product information "Pro Clima, SOLITEX FRONTA QUATTRO, wall formwork sheeting for gap formwork up to 35 mm, roll 50 m"

Use as a wall formwork membrane behind closed and open façades (gap formwork, up to 35 mm gap width; formwork width = at least 3x gap width). Installation on formwork, wood-based panels and all matt and panel-shaped thermal insulation materials.




Advantages

Ensures secure building components: Highly permeable to diffusion and at the same time maximally impermeable to driving rain
Dry building components: non-porous TEEE functional membrane actively transports moisture to the outside
Not visible behind gap formwork: black fleece with print in the overlap area
Maximum ageing resistance and thermal stability thanks to TEEE membrane
6 months outdoor weathering


General conditions

SOLITEX FRONTA QUATTRO membranes must be laid with the printed side facing outwards. They are laid horizontally, tightly and without sagging.
When used behind gap formwork, the gap size must not exceed 35 mm. The width of the formwork: min. 3x gap width.
The distance between the gap formwork and the sheet must be at least 20 mm.
Fixings must not be made in areas where water runs off collectively.
Additional measures should be taken during the construction phase (e.g. tarpaulins) in the case of inhabited buildings or buildings requiring special protection. Tarpaulins should also be considered for longer interruptions to work.


Moisture-active wind seal

SOLITEX FRONTA QUATTRO wall formwork membranes are equipped with monolithic, non-porous, moisture-active functional membranes made of the latest TEEE technology.
They offer significantly higher component safety than conventional microporous membranes.
New standards: Monolithic SOLITEX membrane
pro clima SOLITEX FRONTA QUATTRO has a non-porous, closed-cell TEEE membrane that offers particularly good protection against driving rain.
Unlike conventional wall formwork membranes, where diffusion takes place via air exchange through the microporous membrane, with a SOLITEX membrane diffusion takes place actively along the molecular chains.
SOLITEX FRONTA QUATTRO has an sd value of 0.05 m.
With active moisture transport, the TEEE membrane ensures an extremely fast drying capacity, which provides the membrane with the best possible protection against ice formation in winter.
Once ice has formed, diffusion-open wall formwork membranes turn into vapour barriers (ice is diffusion-tight) and then represent moisture traps.
Other special features of the TEEE membrane are its reliable protection against wood impregnating agents (water droplets cannot penetrate the membrane, even with reduced surface tension, as there are no pores) and its particularly high heat stability (melting point polymer approx. 200 °C, PP approx. 140 °C). This heat stability gives the plastic extremely high ageing stability over decades.
High performance for all requirements
The functional film is securely protected between two robust, particularly tear-resistant protective and cover fleeces made of polypropylene - ideal for high loads when laying the sheets.
The cover fleece is also water-repellent and offers optimum protection against moisture penetration. It protects the special film underneath from damage and UV radiation.
The membranes are glare-free due to the black colouring of the outer cover fleece.
The membrane can be exposed to the elements for up to 6 months.
Areas of application: External wall insulation
Length: 50 m
Manufacturer: Proclima
Packaging: Roll
Pack size: Roll 50 m
Product category: Accessories, Wall
Product group: Flexible insulation
Product line: Pro Clima Solitex Fronta Quattro
Product type: Membranes
Shipping: Collection available, Freight shipping, Parcel shipping
Width: 150 cm

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


The content of this page was translated automatically.