Pro Clima, RB trickle protection membrane, roll 50 m
ProClima
Regular price:
€88.49
Content:
75 Square metre
(€1.18 / 1 Square metre)
Available in 5 days, delivery time 2-5 days
Product number:
01-Rieselschutz
Product information "Pro Clima, RB trickle protection membrane, roll 50 m"
Advantages
Easy to process: robust PP fleece
Flexible use: for dry and slightly damp fills
Reliable protection against dust thanks to particularly dense weave
For safe building components: Particularly open to diffusion
Application
Used as dust and trickle protection for rooms under suspended ceilings with fills and in floors.
General conditions
The pro clima RB trickle protection membrane retains dust and fibres and can be used on floors or under ceilings.
The membrane is laid on a sufficiently pressure-resistant underlay that absorbs mechanical loads, e.g. from insulation materials, fills or other inserts. The trickle protection membrane itself must remain free of corresponding loads.
If the membrane is installed on building components from below, the membrane must be mechanically secured. This can be provided either by cross battens (for lightweight materials such as mineral wool) or plate-shaped components that support the membrane over its entire surface (e.g. when using wood fibre or cellulose insulation or fills).
Membrane joints must have an overlap of approx. 10 cm. The printed marking serves as a guide.
If necessary, the overlaps can be bonded with adhesive tapes from the pro clima system (e.g. TESCON VANA all-round adhesive tape). When bonding, ensure sufficient contact pressure and counter pressure.
Position the adhesive tape in the centre of the overlap and apply carefully, pull by pull, without load or creases. The PRESSFIX pressing aid enables even pressure to be applied.
Connections to rough or mineral substrates can be created in the pro clima system using the ORCON F connection adhesive, for example. To do this, apply a bead of adhesive at least 5 mm thick (more if necessary for very rough surfaces) and lay the trickle protection membrane in the adhesive bed. Do not press the adhesive completely flat.
The RB trickle protection membrane can also be combined with slightly damp fills when laying on a pressure-resistant base (e.g. floors or in joist compartments). Care must be taken to ensure that the moisture can dry out and that neighbouring materials are not damaged by the moisture.
To protect the RB trickle protection membrane from mechanical damage and UV exposure, a full-surface covering must be provided. This panelling is not required in inaccessible rooms without
Laying in the cavity
Lay the membrane in the cavity.
Run up the sides of all rising components (e.g. ceiling beams) and fix with staples or nails.
Overlap sheet joints by approx. 10 cm.
Glue overlaps with TESCON VANA if necessary.
| Areas of application: | Insulation of intermediate ceilings, Insulation of intermediate floors |
|---|---|
| Length: | 50 m |
| Manufacturer: | Proclima |
| Packaging: | Roll |
| Pack size: | Roll 50 m |
| Product category: | Accessories, Interior fit-out |
| Product group: | Floor insulation |
| Product line: | Pro Clima RB dust protection membrane |
| Product type: | Membranes |
| Shipping: | Collection available, Freight shipping, Parcel shipping |
Login
No reviews found. Share your insights with others.