Kreidezeit swamp lime paint for interior and exterior coatings 5 l
Kreidezeit
Regular price:
€28.60
Content:
5 Litre
(€5.72 / 1 Litre)
Available, delivery time: 3-8 days
Product number:
11-888.1
Product information "Kreidezeit swamp lime paint for interior and exterior coatings 5 l"
The Kreidezeit lime putty paint for interior and exterior use is based on tried-and-tested formulations. The fundamental difference in the appearance of the paint lies in the use of natural ingredients, as opposed to the widely used synthetic emulsion paints; in particular, it contains no synthetic resin binders or synthetic pigments such as titanium white. Ökotest rating: ‘very good’.
Data sheet Safety data sheet
The product has excellent breathability, long-lasting alkalinity and a surface that prevents condensation, making it particularly suitable for use in damp rooms.
The resulting colour effect appears more vibrant, but may appear different depending on the angle of the light. A slightly cloudy character emerges, which can be emphasised by using a paintbrush. In some cases, however – for example, when painting woodchip wallpaper – the use of paint rollers is more practical. Tinted lime putty paint should never be applied with paint rollers, however.
Kreidezeit lime putty paint is suitable for both interior and exterior use and produces a high degree of whiteness as well as excellent binding and adhesive properties thanks to the use of finely dispersed marble lime.
It usually provides full coverage in two coats. For external use, three coats extend the durability.
Lime putty paint is matt, white and smooth. Suitable for intermediate and final coats in both interior and exterior applications.
Properties
- Resistant to dry wiping and splash water
- Vapour-permeable
- Antistatic
- particularly suitable for allergy sufferers and children’s bedrooms
- Low tension
- Good coverage
- can be repainted several times
- disinfectant, mould-resistant
- emission-free
- Free from titanium white, preservatives and synthetic resin binders
- alkaline, pH 13
- vegan
Full list of ingredients
Marble hydrated lime, marble powder and sand, sintering water, methylcellulose, citric acid
Suitable interior substrates
Untreated mineral plasters, concrete, stone, masonry, plasterboard, gypsum fibre boards, paper fleece, all Kreidezeit wall paints and plasters (except distemper), matt and absorbent synthetic resin emulsion paints (following the creation of test areas with satisfactory results).
Suitable substrates for external use
Untreated mineral, weather-resistant plasters, concrete, stone. Do not apply to external thermal insulation composite systems.
Priming
Prime all plasters, filling compounds, filled plasterboard, concrete and old emulsion paints with Vega primer or casein primer and allow to dry thoroughly. Do not prime non-woven paper or paper wallpaper.
Application
The recommended application method is to brush the paint on using a cross-hatch technique.
On low-absorbent substrates, white lime putty paint can also be applied with a roller. In this case, work quickly using a ‘wet-on-wet’ cross-hatch technique and finally roll the surface in one direction.
. The application of the paint with a roller should be tested on a small test area.
Do not apply tinted lime putty paint with a roller! Application using an airless spray system is possible.
Dilution
Use the paint undiluted or diluted with 5–10 per cent water, as required. Adjust the dilution so that the paint is easy to apply.
Water-repellent treatment of façade surfaces
For façade surfaces, water-repellent treatment with 2% Kreidezeit Korfu soap is recommended. To do this, dissolve the soap at a ratio of 20 g of soap flakes to 1 litre of water. Do not use a stronger concentration! For an optimal water-repellent effect, apply the soap solution to the dried lime paint as soon as possible, and no later than 24 hours afterwards. Apply thinly and evenly, working from the bottom up. Do not use a roller! The application can be repeated once dry. A cloudiness typical of lime soap may appear on tinted lime paints (if necessary, test on a small area first).
Drying time
approx. 8 hours at temperatures around 20 °C and a relative humidity of 65 per cent. Lower temperatures will prolong the drying time.
Protect exterior coats from sun and rain during the first few days and, if necessary, lightly mist them with water repeatedly (water must not run down the surfaces).
Suitable tools
Good medium-pile paint rollers (polyamide) and paint brushes. Airless sprayers (min. 200 bar nozzle pressure).
Recommended from the Kreidezeit range: façade paintbrush, lime paintbrush, professional paint rollers
Cleaning the tools
With water immediately after use.
| Areas of application: | Interior fit-out, Interior plaster, Lime plasters, Substrate preparation / priming, Wall coating |
|---|---|
| Manufacturer: | Kreidezeit |
| Material: | Lime |
| Packaging: | Bucket |
| Pack size: | 10 litres |
| Product category: | Paints/Plasters, Wall |
| Product group: | Paints and primers, Lime plasters |
| Product line: | Kreidezeit lime putty paint |
| Shipping: | Collection available, Parcel shipping |
Login
No reviews found. Share your insights with others.