Kreidezeit swamp lime colour, filled, with fine brush-on plaster character (grain size 0.5 mm)
Kreidezeit
Regular price:
€6.90
Content:
1 Litre
Available, delivery time: 3-8 days
Product number:
11-886.0
Product information "Kreidezeit swamp lime colour, filled, with fine brush-on plaster character (grain size 0.5 mm)"
Kreidezeit lime putty paint can be used for intermediate and final coats indoors; outdoors, it should only be used as an intermediate coat. Thanks to its excellent breathability, long-lasting alkalinity and a surface that prevents condensation, Kreidezeit lime putty paint is ideal for use in damp rooms.
This lime paint, with its fine textured finish (grain size 0.5 mm), is characterised by its ability to even out slight variations in the surface texture, whilst allowing fine cracks to be filled. It preserves the surface texture of finely rubbed-in plasters.
Kreidezeit lime putty paint produces a high degree of whiteness as well as exceptional binding and adhesive properties through the use of finely dispersed marble lime, and the lime paints require no addition of synthetic resin binders or synthetic pigments such as titanium white.
Usually provides full coverage in 2 coats.
Properties
Resistant to dry wiping and splash-proof
Vapour-permeable
Antistatic
particularly suitable for allergy sufferers and children’s bedrooms
Low tension
Good coverage
can be repainted several times
disinfectant, mould-resistant
emission-free
Free from titanium white, preservatives and synthetic resin binders
alkaline, pH 13
vegan
Full list of ingredients
Marble hydrated lime, marble powder and sand, sintering water, methylcellulose, citric acid
Suitable interior substrates
Untreated mineral plasters, concrete, stone, masonry, plasterboard, gypsum fibre boards, paper fleece, all Kreidezeit wall paints and plasters (except distemper), matt and absorbent synthetic resin emulsion paints (following the creation of test areas with satisfactory results).
Suitable substrates for external use
Untreated mineral, weather-resistant plasters, concrete, stone. Do not apply to external thermal insulation composite systems.
Primer
Prime all plasters, filling compounds, filled plasterboard, concrete and old emulsion paints with Vega Primer or casein primer and allow to dry thoroughly. Do not prime non-woven paper or paper wallpaper.
Application
The recommended application method is to brush the product on using a cross-hatch technique.
On low-absorbent substrates, white lime wash can also be applied with a roller. In this case, work quickly using a ‘wet-on-wet’ cross-hatch technique and finally roll the surface in one direction. The application of the paint with a roller should be tested on a small test area.
Do not apply tinted lime putty paint with a roller! Application using an airless spray system is possible.
Dilution
Use the paint undiluted or diluted with 5–10 per cent water, as required. Adjust the dilution so that the paint is easy to apply.
Drying time
Approx. 8 hours at temperatures around 20 °C and a relative humidity of 65 per cent. Lower temperatures will prolong the drying time.
Protect exterior coats from sun and rain during the first few days and, if necessary, lightly mist them with water repeatedly (water must not run down the surfaces).
Suitable tools
Good medium-pile paint rollers (polyamide) and paint brushes. Airless sprayers (min. 200 bar nozzle pressure).
Cleaning the tools
With water immediately after use.
The colour effect of lime-based wall paints, which are based on traditional recipes, differs from that of the widely used synthetic emulsion paints due to the natural ingredients used (particularly the absence of titanium white). The surfaces appear more vibrant. The colour effect varies depending on the lighting conditions. A slightly cloudy appearance may result. Applying the paint with a brush emphasises this effect. We therefore recommend using a brush. In some cases, however – for example, when painting woodchip wallpaper – the use of paint rollers is more practical. Tinted lime putty paint should never be applied with paint rollers, however.
| Areas of application: | Substrate preparation / priming, Wall coating |
|---|---|
| Basic colours: | White |
| Manufacturer: | Kreidezeit |
| Packaging: | Bucket |
| Pack size: | 1 litre, 5 litres, 10 litres |
| Product group: | Paints and primers |
| Product line: | Kreidezeit lime putty paint |
| Shipping: | Collection available, Parcel shipping |
Login
No reviews found. Share your insights with others.