Kreidezeit stand oil paint, top coat, full-body
Kreidezeit
Regular price:
€16.80
Content:
0.375 Litre
(€44.80 / 1 Litre)
Available, delivery time: 3-8 days
Product number:
11-D1608.0
Product information "Kreidezeit stand oil paint, top coat, full-body"
Kreidezeit stand oil paint is a coloured, highly opaque and weather-resistant protective coating for timber, suitable for both indoor and, in particular, outdoor use, which can be purchased ready for immediate application.
Product information Function Stand oil mixed
shades
shades
The advantages of this resin- and biocide-free stand oil paint are, firstly, that it does not crack, flake or peel, but instead weathers away slowly from the surface, meaning it can be easily maintained by simply cleaning and repainting. Furthermore, the vapour-permeable Kreidezeit stand oil paint impresses with its high opacity. It has a wide range of applications: e.g. windows, doors, timber façades, half-timbered structures, playground equipment, fences, carports, beehives, and can also be used to treat steel and zinc.
Only completely lightfast and weather-resistant earth and mineral pigments are used for pigmentation. The paint is available in 14 different colour variants, as well as in silver and gold, all of which can be mixed together. Many custom shades are also available on request.
The stand oil paint can be applied in three coats, from ‘lean to rich’, as follows:
1. Priming oil: a primer coat with excellent penetrating power.
2. Stand oil paint – semi-oily, with a silk-matt to silk-gloss finish and good filling power. For intermediate and final coats.
3. Stand oil paint – full-fat, a glossy final coat.
For surfaces requiring less gloss, it is also possible to apply just two coats of ‘semi-oily’ stand oil paint, both indoors and outdoors.
It is possible to paint over old oil-based paints and alkyd resin coatings, but no guarantee is given.
Not suitable for floors, stoves, radiators and heating pipes, on rough-sawn timber, old synthetic resin-based coatings, or on horizontal surfaces outdoors.
Properties
Ready to use
Dirt- and water-repellent
very high opacity
Does not crack, split or flake
resin-free, weather-resistant and elastic
breathable
easy to maintain
saliva- and sweat-resistant in accordance with DIN 53160
free from biocides
cobalt-, lead- and barium-free
vegan
Full list of ingredients
Linseed oil, linseed oil stand oil, wood oil stand oil, balsam turpentine oil, zinc white, talc, silicic acid, swelling clay, quartz, manganese, zirconium and calcium driers. Pigments depending on colour shade
Titanium white, iron oxide yellow / red / brown / black, nickel titanate yellow / orange, spinel blue, chromium oxide green, red ochre
Substrate preparation / initial sanding
Completely remove resin blisters, old coats of paint with multiple layers of damage, and old coats of paint and primers based on acrylic or of unknown composition. For outdoor use: saturate absorbent cut edges and end-grain areas with Kreidezeit resin oil and allow to dry for at least 24 hours.
Sand new and weathered timber, as well as rough-sawn timber (grain size P 80–100), and round off the edges. Do not sand any finer, as this will compact the wood and prevent it from absorbing sufficient oil. It is better to ‘open up’ new, smooth, planed or finely pre-sanded timber by sanding. Sand down glossy old oil- or alkyd resin-based coatings (grain size P 80–100). Remove all dust thoroughly after sanding.
Application
Application and drying temperature must be at least 10 °C for at least 48 hours.
Stir the product thoroughly before application. Remove any oxidation film formed during storage beforehand and do not stir it back in. Mix containers from different batch numbers together before application. The product must not be poured onto surfaces!
Clean and dust off untreated substrates.
Apply the product thinly and evenly with a brush or roller. Avoid excess paint and smooth it out. Use a clean brush to remove any paint that has pooled in corners. Always apply subsequent coats only after the previous coat has dried completely.
Intermediate sanding
After priming or an intermediate coat, intermediate sanding may be necessary if the surface has dried rough or too glossy, e.g. due to raised wood fibres. Sand the surface with sandpaper (grain size P 150–180) in the direction of the grain. Remove all dust thoroughly after sanding.
Painting wood (interior and exterior)
1. Priming
Prime normally absorbent woods and weathered, absorbent old oil- or alkyd resin-based coatings with priming oil. After 10 minutes, wipe the surface thoroughly with a dry cloth and remove any oil that has not been absorbed. Do not prime non-absorbent old coatings.
2. Intermediate coat
with stand oil paint – semi-gloss
3. Top coat for a satin finish
with stand oil paint – semi-gloss
or
Final coat for glossy finishes
with stand oil paint – full-body –
Coating system for metal
Outdoor steel: Remove rust mechanically, degrease and remove dust.
1. Apply 2 coats of
with anti-rust paint; allow to dry thoroughly for several days!
2. At least 1 top coat
with stand oil paint – full-body –
In dry indoor areas, the primer coats of anti-rust paint are not required.
Zinc for external use:
Leave to weather for at least 1 year, then wash off the oxide layer with soapy water and a scouring sponge (do not use steel wool!)
1. Intermediate coat
with stand oil paint – half-oil –
2. Final coat
with stand oil paint – full-body –
Drying time
Dry and ready for recoating at 20 °C and 60 per cent relative humidity after approx. 24 hours.
Suitable tools
High-quality paintbrushes and ring brushes, short-pile paint rollers. Do not spray the product.
Cleaning the tools
Wash immediately after use with balsam turpentine oil, then rinse with olive care soap or Corfu soap.
| Areas of application: | Interior fit-out, Substrate preparation / priming, Timber-frame renovation, Wall coating |
|---|---|
| Kreidezeit colours: | Black, Brown, Dark blue, Dark brown, Dove blue, English red, Fir green, Gold, Green, Grey, Ochre, Orange, Oxblood red, Silver, White, Yellow |
| Manufacturer: | Kreidezeit |
| Packaging: | Tin |
| Pack size: | 0.75 litres, 0.375 litres, 2.5 litres |
| Product category: | Accessories, Paints/Plasters, Wall |
| Product group: | Paints and primers, Paints |
| Product line: | Kreidezeit stand oil paint |
| Shipping: | Collection available, Parcel shipping |
Login
No reviews found. Share your insights with others.