Kreidezeit solid colour binder
Kreidezeit
Regular price:
€8.90
Content:
0.5 Kilogram
(€17.80 / 1 Kilogram)
Available, delivery time: 2-5 days
Product number:
11-2140
Product information "Kreidezeit solid colour binder"
When used in combination with Kreidezeit pigments, the Kreidezeit Full-Tone Binder offers an excellent way to mix full-tone wall paint to your own specifications.
Description
Depending on your preference, you can create wall paints using individual pigments or mixtures of two or more pigments. This allows you to mix unique and imaginative colours.
This full-colour interior wall and ceiling paint can be applied to all load-bearing and absorbent plasters (clay, lime, gypsum, cement), filling compounds, woodchip wallpaper, plain paper wallpaper, non-woven wallpaper, plasterboard, gypsum fibreboard and concrete, and is also suitable for firmly adhering, matt and absorbent emulsion paints, provided a test area has been applied.
Also suitable for firmly adhering, matt and absorbent emulsion paints following the creation of test areas with positive results.
The binder is very easy to apply, can be painted over multiple times and is smudge-resistant. It is also a vegan product.
The Vollton binder must be mixed with pigments in a 1:1 ratio and must not be used unpigmented as a single coat.
Properties
Powder to be mixed with water
easy to apply
low odour
Highly vapour-permeable, antistatic
free from titanium white
smudge-resistant and can be recoated multiple times
free from preservatives
free from synthetic resin binders
vegan
Full list of ingredients
Chalk, vegetable casein, porcelain clay, cellulose, soda, methylcellulose
Primer
Prime all plasters, fillers, skimmed plasterboard, concrete and old emulsion paints with Vega primer or casein primer and allow to dry thoroughly. Do not prime non-woven or paper wallpaper.
Mixing the paint
The Vollton binder must be mixed with pigments in a 1:1 ratio, e.g. 1 kg Vollton binder (powder) + 1 kg pigments (powder).
First, stir the pigment into the required amount of clean, cold water until there are no lumps, and only then stir in the Vollton binder until the mixture is lump-free. Alternatively, the Vollton binder and the pigments can be pre-mixed dry and then stirred together in water. Use a powerful mixer (drill with whisk attachment or hand blender) to stir the mixture into the water. Leave to swell for at least 30 minutes and stir thoroughly once more before use.
Water requirement
The amount of water required varies depending on the pigment used.
Guideline values for a mixture of 1 kg of Vollton paint, consisting of 500 g of Vollton binder and 500 g of pigments:
1.25 litres of water: yellow ochre, red ochre, deer-brown umber, golden ochre, orange ochre, oxide orange, green umber, iron oxide black, ultramarine blue, ultramarine violet, spinel yellow, spinel turquoise, spinel blue, spinel green, spinel orange, spinel mint, sun yellow, Burnt umber, Burnt terra di Siena, Iron oxide red 110, Iron oxide red 130, Iron oxide red 140, Iron oxide red 180, Burnt umber (Cyprus), Chromium oxide green
1.50 litres of water Dark greenish umber, reddish umber, blackish-brown umber, iron oxide yellow 930, iron oxide brown 610,
1.75 litres of water Reddish-brown umber, Reddish-brown umber, Reddish-brown umber, Iron oxide yellow 420
2.00 litres of water Dark umber, natural umber, natural terra di Siena,
Thinning
It is important not to apply the full-tone colours too thickly. This means that, depending on the substrate, the colours may need to be further thinned with water to ensure good spreadability.
Lightening with white
To lighten colours with white, the ready-mixed solid colours can be mixed in any proportion with Kreidezeit Vega wall paint or clay paints.
Application
Application temperature: at least 8°C.
Stir occasionally whilst applying.
At least 2 coats are usually required for full coverage. Do not attempt to cover dark or high-contrast substrates with a single coat; applying the paint too thickly can lead to damage (cracks)! Allow previous coats to dry completely before repainting.
The colours lighten significantly as they dry.
Brushing: apply evenly using a cross-hatch technique with a facade brush.
Rolling: First apply generously and evenly using a criss-cross motion, then immediately roll in one direction without applying any further paint.
The mixed paint must be used on the same day. Under no circumstances should paint that smells bad or musty be used: risk of persistent odour problems even after drying!
Drying time in normal conditions
Can be recoated after approx. 8 hours. Fully dry after approx. 24 hours.
Suitable tools
Good medium-pile paint rollers (polyamide) and paint brushes. Airless sprayers (min. 200 bar nozzle pressure).
Cleaning the tools
With water immediately after use.
| Areas of application: | Interior fit-out, Substrate preparation / priming, Wall coating |
|---|---|
| Manufacturer: | Kreidezeit |
| Packaging: | Pouch/Bag |
| Pack size: | Pouch 500 g |
| Product category: | Accessories, Paints/Plasters, Wall |
| Product group: | Paints |
| Product line: | Kreidezeit full-tone binder |
| Shipping: | Collection available, Parcel shipping |
Login
No reviews found. Share your insights with others.