Kreidezeit mould remediation plaster
Kreidezeit
Regular price:
€76.40
Content:
25 Kilogram
(€3.06 / 1 Kilogram)
Available, delivery time: 3-8 days
Product number:
11-168.2
Product information "Kreidezeit mould remediation plaster"
The Kreidezeit mould-removal plaster is characterised by its excellent water-absorption capacity and is therefore particularly suitable for balancing out high levels of humidity in rooms and removing mould, as it immediately absorbs condensation.
This tried-and-tested product for combating mould is made from purely natural and mineral-based ingredients and can be applied to almost all mineral surfaces that are solid, absorbent and free from loose particles. These include, for example, lime, lime-cement, lime-gypsum and cement plasters, masonry and stone in interior applications. Application on gypsum plasters, plasterboard and gypsum fibreboards is available on request.
Suitable for use on all mineral substrates that are solid, absorbent and free from loose particles, such as lime, lime-cement, lime-gypsum and cement plasters, masonry and interior stonework. Use on gypsum plasters, plasterboard and gypsum fibreboards available on request.
Not suitable for wood, wood-based materials, clay plasters, emulsion paints, natural resin emulsion paints, oil-based paint finishes, plastic surfaces, distemper, glossy, non-absorbent or permanently damp substrates.
Properties
Powder to be mixed with water
White, purely mineral finishing plaster of mortar group PI a, made from air-dried lime, marble sand and expanded vermiculite
Max. grain size: 1.5 mm
Water absorption: 1.0 litres/m² at a layer thickness of 3 mm
Vapour-permeable
Free from preservatives
Can be tinted up to 5 per cent with Kreidezeit pigments
Can be recoated multiple times with Kreidezeit lime putty paint
vegan
Full list of ingredients
Mamor hydrated lime, marble sand, expanded vermiculite, cellulose, methylcellulose
Priming
Pre-wet absorbent substrates to saturation with clean water – preferably lime sinter water (Item 169) – and do not allow them to dry out.
Mixing the plaster
Stir the powder into the specified quantity of clean, cold water, using a powerful mixer. Leave to stand for at least 15 minutes and stir thoroughly once more before application.
Water requirement
0.35 – 0.40 l / 1 kg powder
It is normal for the mixed plaster to thicken further. As a general rule, the product should be adjusted on site with water to achieve a consistency suitable for the specific substrate; this may require a slight increase in the amount of water.
Application
Apply the plaster to the pre-wetted substrate to a thickness of 3–5 mm using a stainless-steel trowel or a notched trowel.
Tip: Applying the plaster with an 8 x 8 mm notched trowel and then smoothing it produces a layer thickness of approx. 3 mm.
Once the plaster has set slightly, rub it down with a sponge board or wooden trowel.
Special notes: During the setting process (2–3 days), the plaster must be allowed to dry slowly. Lightly re-moisten 1–2 times during this period. Take appropriate precautions to prevent the plaster from drying out too quickly. Avoid draughts and direct sunlight. Temperatures during application and curing must not fall below 7°C or exceed 25°C.
Maximum application thickness: 10 mm.
Subsequent coats
Only Kreidezeit lime putty paint must be used as a top coat, as other painting systems may impair the functionality of the render.
Drying time in normal conditions
At least 1 day per mm of application thickness. Low temperatures prolong the drying time.
Suitable tools
Recommended from the Kreidezeit range: Venetian trowels, spring steel trowels
Cleaning the tools
With water immediately after use.
| Areas of application: | Base coat plaster, Lime plasters, Substrate preparation / priming, Wall coating |
|---|---|
| Manufacturer: | Kreidezeit |
| Packaging: | Pouch/Bag, Sack |
| Pack size: | 2.5kg, 25kg/sack |
| Product category: | Paints/Plasters |
| Product group: | Lime plasters |
| Shipping: | Collection available, Parcel shipping |
Login
No reviews found. Share your insights with others.