Kreidezeit Floor Hard Oil
Kreidezeit
Regular price:
€24.79
Content:
0.75 Litre
(€33.05 / 1 Litre)
Available in 8 days, delivery time 2-5 days
Product number:
11-310
Product information "Kreidezeit Floor Hard Oil"
The Kreidezeit Floor Hard Oil is a tried-and-tested all-purpose oil suitable for a wide range of applications; it is made from natural products and contains no ‘hidden’ alkyd resins. It offers robust, reliable protection for almost all types of wood and wooden surfaces indoors and can be used, for example, on floors, worktops, tables, furniture, beams, the inside of windows, panelling and much more.
Coverage per coat: 12 m²
Consumption per m²: 0.06 l
Exact consumption should be determined on site.
Thanks to its high linseed oil content, the product penetrates deeply into even the smallest wood pores and offers a long ‘open’ working time. The use of natural balsam turpentine oil also offers the advantage that this hardwood floor oil can be used on almost all types of wood and wooden surfaces, including tannin-rich and dense woods.
The product can be applied over all Kreidezeit oils, glazes and waxes and can also be tinted with earth and mineral pigments if required. To do this, first mix a small amount of the product with the pigments and then stir it into the main batch.
Alternatively, the product can be tinted in any proportion with stand oil paint.
Properties
hard-wearing, dirt- and water-repellent
contains solvents, very economical
does not crack or become brittle
Vapour-permeable, antistatic, warm to the touch
transparent, honey-coloured, enhancing
Excellent penetration
easy to apply, easy to repair
suitable for children’s toys in accordance with EN 71-3
saliva- and sweat-resistant in accordance with DIN 53160
cobalt-, lead- and barium-free
vegan
Full list of ingredients
Linseed oil, balsam turpentine oil, linseed oil stand oil, wood oil stand oil, rosin glycerine ester, manganese drier
Application
Shake the product briefly before use.
Kreidezeit Hardwood Floor Oil is applied in two coats with an intermediate drying period. Intermediate sanding may be required before the second coat.
Mix containers from different batch numbers together before use. The product must not be poured onto surfaces!
Clean and dust off untreated substrates.
Kreidezeit Hardwood Floor Oil is ready to use and is applied undiluted.
1. Initial sanding
Sand the wood (grain size P 80–100) and round off the edges. Do not sand any finer than this, as the wood will otherwise become compacted and may not absorb enough oil. It is best to ‘open up’ new, smooth, planed or finely pre-sanded wood by sanding.
Remove all dust thoroughly after sanding.
2. First coat
a) Manual application:
Apply Kreidezeit Hardwood Floor Oil evenly using a brush, short-pile roller, cloth or sponge. After 10–20 minutes, rub the entire treated area thoroughly with a dry, lint-free cloth until the surface has an even, silk-matt finish.
b) Machine application:
Apply Kreidezeit Floor Hard Oil using a short-pile roller. After allowing the oil to soak in for 10–20 minutes, rub the entire treated area thoroughly with a soft pad until the surface has an even, silky-matt finish. Change the pads in good time once they become saturated.
When rubbing, ensure that any oil that has not been absorbed is completely removed, as otherwise shiny or sticky patches may remain.
Kreidezeit Hardwood Floor Oil must penetrate the wood completely and must not form a film on the surface.
3. Intermediate sanding (optional)
Intermediate sanding is only necessary if the surface has dried rough after the first coat, e.g. due to raised wood fibres. Sand with sandpaper (grain size P 100–120) in the direction of the grain.
Remove all dust thoroughly after sanding.
4. Second coat
Repeat the procedure as for the first coat.
5. Wax treatment
Oiled floors generally do not require a wax treatment. To enhance the shine, a final treatment with Kreidezeit Carnauba Wax Emulsion may be carried out after 48 hours at the earliest. To do this, dilute 1 part emulsion with 2 parts water, apply evenly and thinly, allow to dry and polish as required.
Drying time
Dry and ready for further work at 20 °C and 60% relative humidity after approx. 24 hours (or 48 hours on tannin-containing substrates, such as oak, etc.).
High humidity, cold temperatures and tannin-containing substrates significantly prolong the drying time.
Fully cured after approx. 4 weeks. Handle with care and protect from water during this period.
Suitable tools
Varnish brushes / flat brushes, short-pile rollers (Magic Felt, item 6517), lint-free cloths, solvent-resistant plastic sponges. For larger areas: floor machines with soft pads – do not apply the product with a surface/floor trowel.
Cleaning the tools
Wash immediately after use with balsam turpentine oil, followed by Olive Care Soap or Corfu Soap.
| Areas of application: | Furniture making, Interior fit-out, Substrate preparation / priming |
|---|---|
| Manufacturer: | Kreidezeit |
| Packaging: | Tin |
| Pack size: | 2.5 litres, 5 litres, 10 litres, Tin 0.75 l |
| Product category: | Accessories, Furnishing, Paints/Plasters, Window products |
| Product group: | Paints |
| Shipping: | Collection available, Parcel shipping |
Login
No reviews found. Share your insights with others.