Skip to main content Skip to search Skip to main navigation

KEW dowel, frame dowel with double expansion zone with pre-assembled hexagon head screw and washer, box of 50 pieces,

Product information "KEW dowel, frame dowel with double expansion zone with pre-assembled hexagon head screw and washer, box of 50 pieces, "

10 x 180 mm

The KEW frame anchor with up to three anchoring depths is approved with the KEW hexagon safety screw for multiple fixings of non-load-bearing systems in concrete masonry and aerated concrete. The KEW frame anchor is also approved for single-point fixings in concrete, for pressure-loaded spacer constructions of façades. In perforated brickwork, the two expansion zones of the anchor apply force evenly; in aerated concrete and solid building materials, they combine to form one long expansion element. This guarantees outstanding load values. The extensive range with diameters of 8, 10 and 14 mm and dowel lengths of up to 230 mm enable versatile applications. The KEW frame plug with hexagon head screw and moulded washer is particularly recommended for fixing metal structures.

Advantages:

The special geometry of the anchor distributes the holding forces evenly in the drill hole.
The approval for single-point fixing in cracked concrete makes the KEW frame anchor a specialist in concrete and an economical alternative to steel anchors for applications such as fixing canopies and external railings.
The longer ribs prevent the dowel from turning during installation.
The KEW frame anchor is also approved for applications that are subjected to pressure and may be used for façade constructions that are installed at a distance without wall brackets.

Applications:

Façade, ceiling and roof substructures made of wood or metal
Compression-loaded façade substructures (e.g. mounted at a distance without wall brackets)
windows
Gates and doors
Wardrobes
Kitchen wall cabinets
Squared timber
beams
TV consoles
Wall panelling
Metal brackets
Metal brackets
Cable ducts
Cable trays
Building materials:
Approved for:
vertically perforated bricks
Aerated concrete
Hollow block made of lightweight concrete
Perforated sand-lime brick
Thermal insulation blocks
Solid block made of lightweight and normal concrete
Solid brick
Solid sand-lime brick
Concrete - C12/15
Also suitable for:
Natural stone with dense structure
Solid plasterboard

Installation instructions:

The KEW frame anchor is suitable for push-through installation.
In perforated stone masonry, the two expansion zones ensure force transmission that is gentle on the substrate. The porous stone webs are not destroyed by the second expansion zone and can therefore be used for force transmission.
In aerated concrete and solid building materials, the two expansion zones combine to form a long expansion element and guarantee even load distribution over the entire surface of the substrate.
Countersunk screws are recommended for fixing timber constructions. For metal constructions, anchors with a wide sleeve edge and hexagon head screws with a moulded washer.
Areas of application: Screws
Manufacturer: KEW
Packaging: Pack
Pack size: Carton 50 pieces
Product category: Accessories, Insulation materials, Interior fit-out, Wall
Product group: Wall anchors
Product line: KEW wall anchors
Product type: Wall anchors
Shipping: Collection available, Freight shipping, Parcel shipping
Size: 10 x 80 mm, 10 x 100 mm, 10 x 120 mm, 10 x 140 mm, 10 x 160 mm, 10 x 180 mm

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


The content of this page was translated automatically.