Claytec, clay joint filler, natural brown, 1.5 kg
Regular price:
€12.86
Content:
1.5 Kilogram
(€8.57 / 1 Kilogram)
Available, delivery time: 2-5 days
Product number:
SW10106
Product information "Claytec, clay joint filler, natural brown, 1.5 kg"
Clay joint filler
Filling material for joints between clay and timber components such as door panelling and skirting boards as well as for dowel holes. Also suitable for cracks and defects in historic half-timbered beams. Clay joint filler is the ecological alternative to plastic fillers. The dry material is mixed with water, poured into the refillable CLAYTEC interchangeable cartridge and applied with the cartridge press. Remaining quantities can be stored indefinitely. The natural-brown colour is suitable for natural-coloured clay interior plaster surfaces.
Area of application
Filling joints between half-timbered beams and clay infills. For joints between clay or lime plasters and finishing elements such as skirting boards, door panelling or other adjacent fixtures. For closing wood shrinkage cracks and settlement cracks caused by building components. As a filler compound for dowel holes etc.
Composition
Natural building clay, cork, expanded glass, talcum, cellulose, vegetable thickener
Delivery form, yield
1.5 kg bag yields approx. 2.5 litres of joint filler
Colour natural-BROWN
Colour natural-LIGHT
Available to match: CLAYTEC replaceable cartridge empty with nozzle and piston / 310 litres
Storage
Can be stored in a cool, dry place indefinitely
Preparation
Add water with a kitchen whisk or by hand. Natural brown 1.15 to 1.25 litres, natural light 0.975 to 1.15 litres depending on the desired processing consistency and width of the joints to be filled.
Processing
Joints and cracks must be carefully cleaned mechanically. Absorbent mineral joint flanks can be carefully moistened to bind dust. The mixed material can be poured into the CLAYTEC interchangeable cartridge (Art. No. 182/582) using a dough spatula, for example, and is ready for immediate use. When choosing a cartridge press, make sure it is a quality device. The piston in the interchangeable cartridge can be pushed back with a round rod for multiple use.
Silicone spatulas are suitable for removing the joint filler, fine brushes and clean water for smoothing. In the case of wide or deep joints, fine tears may occur on one edge of the joint or the filler may collapse slightly.
In addition to joint filling, small areas can also be filled with a spatula.
Further treatment
Finishing with or without material using a sponge and clean water. Filling and painting is possible with all products suitable for clay plaster surfaces, especially CLAYFIX clay paint.
| Areas of application: | Base coat plaster, Clay and drylining boards, Clay construction, Design plasters, Interior fit-out, Interior plaster, Joint insulation, Substrate preparation / priming, Timber-frame renovation |
|---|---|
| Manufacturer: | Claytec |
| Material: | Clay |
| Packaging: | Pouch/Bag |
| Pack size: | 1.5 kg |
| Product category: | Clay building materials, Interior fit-out, Paints/Plasters, Wall |
| Product group: | Clay plasters |
| Product line: | Claytec joint-filler |
| Shipping: | Collection available, Freight shipping, Parcel shipping |
Login
No reviews found. Share your insights with others.