Ampacoll Airmax Spray Primer (500 ml) – Permanent-bonding primer for porous substrates
€18.80
Available, delivery time: 2-5 days
Product information "Ampacoll Airmax Spray Primer (500 ml) – Permanent-bonding primer for porous substrates"
Ampacoll Airmax Spray Primer (500 ml) – Permanent-bonding primer for porous substrates
Ampacoll Airmax Spray Primer is a high-performance, solvent-based adhesive primer made from synthetic rubber. It has been specially developed to ensure the adhesion of ampacoll adhesive tapes to porous or rough substrates. The practical spray application allows work to progress significantly faster than with conventional brush-on primers. Furthermore, the product is ideal for use in challenging site conditions such as cold or damp environments.
Product features and benefits
Time-saving: Easy to spray and therefore much quicker to apply than with a brush.
Optimised handling: Overhead and vertical work can be carried out much more easily thanks to the spray system (ideally use a fresh can for overhead applications).
Flexible spray head: The spray volume can be adjusted to three settings (Low, Medium, High) by turning the spray head. Furthermore, the spray pattern can be precisely directed by turning the small black nozzle.
Permanently tacky & fast-drying: Short flash-off time; once dry, the primer remains permanently tacky for optimum adhesive tape adhesion.
Versatile: Suitable for indoor and outdoor use.
Applications
Serves as a bonding primer for ampacoll adhesive tapes on porous or rough substrates such as:
Brickwork
Plaster and concrete
Raw timber
Softwood fibreboards
etc.
- Base material: synthetic rubber, solvent-based
- Coverage: 30–70 linear metres at 60 mm width (depending on the absorbency of the substrate)
- Drying time (flash-off time): approx. 10 mins (+20 °C) / approx. 30 mins (0 °C) / approx. 40 mins (-5 °C)
- Application temperature (product & substrate): -5 °C to +35 °C
- Solvent: Yes
- Storage: unopened at +5 °C to +25 °C (frost-free).
- Protect from direct sunlight.
Application instructions
1. Preparation The substrate, joints and materials to be bonded must be clean, dry and free from dust and grease. Cement residue and concrete debris must be removed beforehand. Cover plastics and sensitive surfaces before spraying to protect them.
2. Application and drying Apply the primer evenly across the width of the adhesive tape being used. Absorbent substrates should be sprayed slowly and thoroughly in a single pass. Protect the sprayed surfaces from dust and moisture whilst they are drying. Depending on the temperature and substrate, the primer dries in 10 to 40 minutes (this time may be extended in damp conditions or at low temperatures). Important: The primer remains tacky. It is considered completely dry when fingerprints are no longer visible or are only very faintly visible.
3. Cleaning and maintenance of the spray nozzle Remove any splashes immediately. Wipe the spray nozzle with a cloth whenever you take a break from work. To prevent blockages, regularly spray a very small amount of primer directly onto a cloth and use it to wipe the spray nozzle clean.
Important notes on material compatibility: Ampacoll Airmax spray primer is not compatible with paint. The product may dissolve paints, varnishes and plastics. You should therefore always check compatibility with adjacent materials beforehand. Please refer to the safety data sheet for further information.
| Areas of application: | Ampacoll adhesive tapes, Porous substrates, Suitable for exterior use |
|---|---|
| Manufacturer: | Ampack |
| Packaging: | Tin |
| Pack size: | 0.5 litres |
| Product group: | Building sealing |
| Product type: | Accessories |
| Shipping: | Collection available, Parcel shipping |
Login