Go to homepage
€0.00*





Jade green


The colour spectrum of clays combines refreshing coolness with a touch of the exotic. Green and grey are among the preferred colours of designers and architects - elegant, subtle and multi-faceted. They create a natural design in perfect harmony.

Find your products even easier with the product filter

Filter
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay paint, Indian red 4.0, colour range
ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

€19.00*

Details
This website uses cookies to ensure the best experience possible. More information...