ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix Lehm-Anstrich  Lehm- Antrichstoffe, wahlweise glatt oder mit Körnung, für Innenräume. Der ClayFix Lehmanstrich bietet eine einfache Möglichkeit, Oberflächen mit Lehm-Finish zu gestalten. Er ist in 146 Erdfarbtönen erhältlich, die meist heller sind als die YOSIMA Farbpalette. Zur weiteren Strukturierung stehen Feinkorn und Grobkorn zur Auswahl. Der Anstrich ist baubiologisch hochwertig, lösemittelfrei und atmungsaktiv. Die Trockenmasse wird mit Wasser angerührt und kann auf allen geeigneten Flächen im Kreuzschlag mit Pinsel, Bürste oder Quast aufgetragen werden. Zudem eignet sich ClayFix Lehm- Anstrich hervorragend zum Sprühen.Verarbeitungsvideo    Produktblatt   Flyer   Arbeitsblatt   Arbeitsblatt für feine Oberflächen  Farbraum Aus den vielen möglichen Kombinationen zur Mischung der Grundfarbtöne wurden sieben besonders ansprechende Farbräume ausgewählt. In jeder dieser Reihen wurden zwei Grundfarben in vier Stufen miteinander kombiniert. Die daraus resultierenden Farbtöne wurden zusätzlich in drei Stufen mit Weiß gemischt. Diese Farbräume sind identisch mit den YOSIMA-Farbräumen aufgebaut, wodurch die Farben perfekt miteinander harmonieren. ProduktinformationenProdukt und AnwendungLehmanstrichstoff nach DVL TM 06. für die Innenraumgestaltung (nicht im Spritzwasserbereich). Zusammensetzung farbige Lehme und Tone, Talkum, Kreide, Gummi-Arabicum, Saponin, Saponin, Eisenoxid in Farbtönen RO und BR < 1,0%, Cellulosefasern, Cellulosefasern, Methylcellulose < 1% (wasserlösliche Stabilisierung). Strukturzuschläge Marmorsand 0-0,5 mm (Feinkorn), Marmorsand 0,5-1 mm (Grobkorn). EigenschaftenLehm-Anstrich Feinkorn (zuvor Streichputz) JADE-GRÜN: 1.2 Abrieb 0,07 g (zul. 0,20 g), Nassabriebsklasse 5 gemäß DIN EN 13300. Gebinde 10 kg Oval-Deckeleimer, 5 kg Eimer, 1,5 kg Kleingebinde (Beutel).  Verbrauch Auf hellen Untergründen mit gutem Saugverhalten oder mit der Grundierung DIE WEISSE vorbehandelten Flächen ist in der Regel ein Anstrich ausreichend. Je nach Untergrund und Anspruch an das Farbbild zwei Anstriche notwendig. 10 kg für einen Anstrich auf ca. 60 m² (dickflüssig). 1,5 kg für einen Anstrich auf ca. 9 m². 10 kg für zweifachen Anstrich auf ca. 50 m² (dünnflüssig). 1,5 kg für zweifachen Anstrich auf ca. 7,5 m². Die Reichweite ist generell abhängig vom Untergrund und dem verwendetem Werkzeug. Lagerung Trockene kühle Lagerung unbegrenzt möglich

ClayFix Lehm-Anstrich  Lehm- Antrichstoffe, wahlweise glatt oder mit Körnung, für Innenräume. Der ClayFix Lehmanstrich bietet eine einfache Möglichkeit, Oberflächen mit Lehm-Finish zu gestalten. Er ist in 146 Erdfarbtönen erhältlich, die meist heller sind als die YOSIMA Farbpalette. Zur weiteren Strukturierung stehen Feinkorn und Grobkorn zur Auswahl. Der Anstrich ist baubiologisch hochwertig, lösemittelfrei und atmungsaktiv. Die Trockenmasse wird mit Wasser angerührt und kann auf allen geeigneten Flächen im Kreuzschlag mit Pinsel, Bürste oder Quast aufgetragen werden. Zudem eignet sich ClayFix Lehm- Anstrich hervorragend zum Sprühen.Verarbeitungsvideo    Produktblatt   Flyer   Arbeitsblatt   Arbeitsblatt für feine Oberflächen  Farbraum Aus den vielen möglichen Kombinationen zur Mischung der Grundfarbtöne wurden sieben besonders ansprechende Farbräume ausgewählt. In jeder dieser Reihen wurden zwei Grundfarben in vier Stufen miteinander kombiniert. Die daraus resultierenden Farbtöne wurden zusätzlich in drei Stufen mit Weiß gemischt. Diese Farbräume sind identisch mit den YOSIMA-Farbräumen aufgebaut, wodurch die Farben perfekt miteinander harmonieren. ProduktinformationenProdukt und AnwendungLehmanstrichstoff nach DVL TM 06. für die Innenraumgestaltung (nicht im Spritzwasserbereich). Zusammensetzung farbige Lehme und Tone, Talkum, Kreide, Gummi-Arabicum, Saponin, Saponin, Eisenoxid in Farbtönen RO und BR < 1,0%, Cellulosefasern, Cellulosefasern, Methylcellulose < 1% (wasserlösliche Stabilisierung). Strukturzuschläge Marmorsand 0-0,5 mm (Feinkorn), Marmorsand 0,5-1 mm (Grobkorn). EigenschaftenLehm-Anstrich Feinkorn (zuvor Streichputz) JADE-GRÜN: 1.2 Abrieb 0,07 g (zul. 0,20 g), Nassabriebsklasse 5 gemäß DIN EN 13300. Gebinde 10 kg Oval-Deckeleimer, 5 kg Eimer, 1,5 kg Kleingebinde (Beutel).  Verbrauch Auf hellen Untergründen mit gutem Saugverhalten oder mit der Grundierung DIE WEISSE vorbehandelten Flächen ist in der Regel ein Anstrich ausreichend. Je nach Untergrund und Anspruch an das Farbbild zwei Anstriche notwendig. 10 kg für einen Anstrich auf ca. 60 m² (dickflüssig). 1,5 kg für einen Anstrich auf ca. 9 m². 10 kg für zweifachen Anstrich auf ca. 50 m² (dünnflüssig). 1,5 kg für zweifachen Anstrich auf ca. 7,5 m². Die Reichweite ist generell abhängig vom Untergrund und dem verwendetem Werkzeug. Lagerung Trockene kühle Lagerung unbegrenzt möglich

ClayFix Lehm-Anstrich  Lehm- Antrichstoffe, wahlweise glatt oder mit Körnung, für Innenräume. Der ClayFix Lehmanstrich bietet eine einfache Möglichkeit, Oberflächen mit Lehm-Finish zu gestalten. Er ist in 146 Erdfarbtönen erhältlich, die meist heller sind als die YOSIMA Farbpalette. Zur weiteren Strukturierung stehen Feinkorn und Grobkorn zur Auswahl. Der Anstrich ist baubiologisch hochwertig, lösemittelfrei und atmungsaktiv. Die Trockenmasse wird mit Wasser angerührt und kann auf allen geeigneten Flächen im Kreuzschlag mit Pinsel, Bürste oder Quast aufgetragen werden. Zudem eignet sich ClayFix Lehm- Anstrich hervorragend zum Sprühen.Verarbeitungsvideo    Produktblatt   Flyer   Arbeitsblatt   Arbeitsblatt für feine Oberflächen  Farbraum Aus den vielen möglichen Kombinationen zur Mischung der Grundfarbtöne wurden sieben besonders ansprechende Farbräume ausgewählt. In jeder dieser Reihen wurden zwei Grundfarben in vier Stufen miteinander kombiniert. Die daraus resultierenden Farbtöne wurden zusätzlich in drei Stufen mit Weiß gemischt. Diese Farbräume sind identisch mit den YOSIMA-Farbräumen aufgebaut, wodurch die Farben perfekt miteinander harmonieren. ProduktinformationenProdukt und AnwendungLehmanstrichstoff nach DVL TM 06. für die Innenraumgestaltung (nicht im Spritzwasserbereich). Zusammensetzung farbige Lehme und Tone, Talkum, Kreide, Gummi-Arabicum, Saponin, Saponin, Eisenoxid in Farbtönen RO und BR < 1,0%, Cellulosefasern, Cellulosefasern, Methylcellulose < 1% (wasserlösliche Stabilisierung). Strukturzuschläge Marmorsand 0-0,5 mm (Feinkorn), Marmorsand 0,5-1 mm (Grobkorn). EigenschaftenLehm-Anstrich Feinkorn (zuvor Streichputz) JADE-GRÜN: 1.2 Abrieb 0,07 g (zul. 0,20 g), Nassabriebsklasse 5 gemäß DIN EN 13300. Gebinde 10 kg Oval-Deckeleimer, 5 kg Eimer, 1,5 kg Kleingebinde (Beutel).  Verbrauch Auf hellen Untergründen mit gutem Saugverhalten oder mit der Grundierung DIE WEISSE vorbehandelten Flächen ist in der Regel ein Anstrich ausreichend. Je nach Untergrund und Anspruch an das Farbbild zwei Anstriche notwendig. 10 kg für einen Anstrich auf ca. 60 m² (dickflüssig). 1,5 kg für einen Anstrich auf ca. 9 m². 10 kg für zweifachen Anstrich auf ca. 50 m² (dünnflüssig). 1,5 kg für zweifachen Anstrich auf ca. 7,5 m². Die Reichweite ist generell abhängig vom Untergrund und dem verwendetem Werkzeug. Lagerung Trockene kühle Lagerung unbegrenzt möglich

ClayFix Lehm-Anstrich  Lehm- Antrichstoffe, wahlweise glatt oder mit Körnung, für Innenräume. Der ClayFix Lehmanstrich bietet eine einfache Möglichkeit, Oberflächen mit Lehm-Finish zu gestalten. Er ist in 146 Erdfarbtönen erhältlich, die meist heller sind als die YOSIMA Farbpalette. Zur weiteren Strukturierung stehen Feinkorn und Grobkorn zur Auswahl. Der Anstrich ist baubiologisch hochwertig, lösemittelfrei und atmungsaktiv. Die Trockenmasse wird mit Wasser angerührt und kann auf allen geeigneten Flächen im Kreuzschlag mit Pinsel, Bürste oder Quast aufgetragen werden. Zudem eignet sich ClayFix Lehm- Anstrich hervorragend zum Sprühen.Verarbeitungsvideo    Produktblatt   Flyer   Arbeitsblatt   Arbeitsblatt für feine Oberflächen  Farbraum Aus den vielen möglichen Kombinationen zur Mischung der Grundfarbtöne wurden sieben besonders ansprechende Farbräume ausgewählt. In jeder dieser Reihen wurden zwei Grundfarben in vier Stufen miteinander kombiniert. Die daraus resultierenden Farbtöne wurden zusätzlich in drei Stufen mit Weiß gemischt. Diese Farbräume sind identisch mit den YOSIMA-Farbräumen aufgebaut, wodurch die Farben perfekt miteinander harmonieren. ProduktinformationenProdukt und AnwendungLehmanstrichstoff nach DVL TM 06. für die Innenraumgestaltung (nicht im Spritzwasserbereich). Zusammensetzung farbige Lehme und Tone, Talkum, Kreide, Gummi-Arabicum, Saponin, Saponin, Eisenoxid in Farbtönen RO und BR < 1,0%, Cellulosefasern, Cellulosefasern, Methylcellulose < 1% (wasserlösliche Stabilisierung). Strukturzuschläge Marmorsand 0-0,5 mm (Feinkorn), Marmorsand 0,5-1 mm (Grobkorn). EigenschaftenLehm-Anstrich Feinkorn (zuvor Streichputz) JADE-GRÜN: 1.2 Abrieb 0,07 g (zul. 0,20 g), Nassabriebsklasse 5 gemäß DIN EN 13300. Gebinde 10 kg Oval-Deckeleimer, 5 kg Eimer, 1,5 kg Kleingebinde (Beutel).  Verbrauch Auf hellen Untergründen mit gutem Saugverhalten oder mit der Grundierung DIE WEISSE vorbehandelten Flächen ist in der Regel ein Anstrich ausreichend. Je nach Untergrund und Anspruch an das Farbbild zwei Anstriche notwendig. 10 kg für einen Anstrich auf ca. 60 m² (dickflüssig). 1,5 kg für einen Anstrich auf ca. 9 m². 10 kg für zweifachen Anstrich auf ca. 50 m² (dünnflüssig). 1,5 kg für zweifachen Anstrich auf ca. 7,5 m². Die Reichweite ist generell abhängig vom Untergrund und dem verwendetem Werkzeug. Lagerung Trockene kühle Lagerung unbegrenzt möglich

ClayFix Lehm-Anstrich  Lehm- Antrichstoffe, wahlweise glatt oder mit Körnung, für Innenräume. Der ClayFix Lehmanstrich bietet eine einfache Möglichkeit, Oberflächen mit Lehm-Finish zu gestalten. Er ist in 146 Erdfarbtönen erhältlich, die meist heller sind als die YOSIMA Farbpalette. Zur weiteren Strukturierung stehen Feinkorn und Grobkorn zur Auswahl. Der Anstrich ist baubiologisch hochwertig, lösemittelfrei und atmungsaktiv. Die Trockenmasse wird mit Wasser angerührt und kann auf allen geeigneten Flächen im Kreuzschlag mit Pinsel, Bürste oder Quast aufgetragen werden. Zudem eignet sich ClayFix Lehm- Anstrich hervorragend zum Sprühen.Verarbeitungsvideo    Produktblatt   Flyer   Arbeitsblatt   Arbeitsblatt für feine Oberflächen  Farbraum Aus den vielen möglichen Kombinationen zur Mischung der Grundfarbtöne wurden sieben besonders ansprechende Farbräume ausgewählt. In jeder dieser Reihen wurden zwei Grundfarben in vier Stufen miteinander kombiniert. Die daraus resultierenden Farbtöne wurden zusätzlich in drei Stufen mit Weiß gemischt. Diese Farbräume sind identisch mit den YOSIMA-Farbräumen aufgebaut, wodurch die Farben perfekt miteinander harmonieren. ProduktinformationenProdukt und AnwendungLehmanstrichstoff nach DVL TM 06. für die Innenraumgestaltung (nicht im Spritzwasserbereich). Zusammensetzung farbige Lehme und Tone, Talkum, Kreide, Gummi-Arabicum, Saponin, Saponin, Eisenoxid in Farbtönen RO und BR < 1,0%, Cellulosefasern, Cellulosefasern, Methylcellulose < 1% (wasserlösliche Stabilisierung). Strukturzuschläge Marmorsand 0-0,5 mm (Feinkorn), Marmorsand 0,5-1 mm (Grobkorn). EigenschaftenLehm-Anstrich Feinkorn (zuvor Streichputz) JADE-GRÜN: 1.2 Abrieb 0,07 g (zul. 0,20 g), Nassabriebsklasse 5 gemäß DIN EN 13300. Gebinde 10 kg Oval-Deckeleimer, 5 kg Eimer, 1,5 kg Kleingebinde (Beutel).  Verbrauch Auf hellen Untergründen mit gutem Saugverhalten oder mit der Grundierung DIE WEISSE vorbehandelten Flächen ist in der Regel ein Anstrich ausreichend. Je nach Untergrund und Anspruch an das Farbbild zwei Anstriche notwendig. 10 kg für einen Anstrich auf ca. 60 m² (dickflüssig). 1,5 kg für einen Anstrich auf ca. 9 m². 10 kg für zweifachen Anstrich auf ca. 50 m² (dünnflüssig). 1,5 kg für zweifachen Anstrich auf ca. 7,5 m². Die Reichweite ist generell abhängig vom Untergrund und dem verwendetem Werkzeug. Lagerung Trockene kühle Lagerung unbegrenzt möglich

ClayFix Lehm-Anstrich  Lehm- Antrichstoffe, wahlweise glatt oder mit Körnung, für Innenräume. Der ClayFix Lehmanstrich bietet eine einfache Möglichkeit, Oberflächen mit Lehm-Finish zu gestalten. Er ist in 146 Erdfarbtönen erhältlich, die meist heller sind als die YOSIMA Farbpalette. Zur weiteren Strukturierung stehen Feinkorn und Grobkorn zur Auswahl. Der Anstrich ist baubiologisch hochwertig, lösemittelfrei und atmungsaktiv. Die Trockenmasse wird mit Wasser angerührt und kann auf allen geeigneten Flächen im Kreuzschlag mit Pinsel, Bürste oder Quast aufgetragen werden. Zudem eignet sich ClayFix Lehm- Anstrich hervorragend zum Sprühen.Verarbeitungsvideo    Produktblatt   Flyer   Arbeitsblatt   Arbeitsblatt für feine Oberflächen  Farbraum Aus den vielen möglichen Kombinationen zur Mischung der Grundfarbtöne wurden sieben besonders ansprechende Farbräume ausgewählt. In jeder dieser Reihen wurden zwei Grundfarben in vier Stufen miteinander kombiniert. Die daraus resultierenden Farbtöne wurden zusätzlich in drei Stufen mit Weiß gemischt. Diese Farbräume sind identisch mit den YOSIMA-Farbräumen aufgebaut, wodurch die Farben perfekt miteinander harmonieren. ProduktinformationenProdukt und AnwendungLehmanstrichstoff nach DVL TM 06. für die Innenraumgestaltung (nicht im Spritzwasserbereich). Zusammensetzung farbige Lehme und Tone, Talkum, Kreide, Gummi-Arabicum, Saponin, Saponin, Eisenoxid in Farbtönen RO und BR < 1,0%, Cellulosefasern, Cellulosefasern, Methylcellulose < 1% (wasserlösliche Stabilisierung). Strukturzuschläge Marmorsand 0-0,5 mm (Feinkorn), Marmorsand 0,5-1 mm (Grobkorn). EigenschaftenLehm-Anstrich Feinkorn (zuvor Streichputz) JADE-GRÜN: 1.2 Abrieb 0,07 g (zul. 0,20 g), Nassabriebsklasse 5 gemäß DIN EN 13300. Gebinde 10 kg Oval-Deckeleimer, 5 kg Eimer, 1,5 kg Kleingebinde (Beutel).  Verbrauch Auf hellen Untergründen mit gutem Saugverhalten oder mit der Grundierung DIE WEISSE vorbehandelten Flächen ist in der Regel ein Anstrich ausreichend. Je nach Untergrund und Anspruch an das Farbbild zwei Anstriche notwendig. 10 kg für einen Anstrich auf ca. 60 m² (dickflüssig). 1,5 kg für einen Anstrich auf ca. 9 m². 10 kg für zweifachen Anstrich auf ca. 50 m² (dünnflüssig). 1,5 kg für zweifachen Anstrich auf ca. 7,5 m². Die Reichweite ist generell abhängig vom Untergrund und dem verwendetem Werkzeug. Lagerung Trockene kühle Lagerung unbegrenzt möglich

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible

ClayFix clay coating Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.Application video Product sheet Flyer Worksheet Worksheet for fine surfaces Colour range Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.Product informationProduct and applicationClay paint according to DVL TM 06. for interior design (not for splash water areas). Composition Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser). Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain). PropertiesClay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300. Container 10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag). Application On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage. storage unlimited possible