This partially threaded screw from Würth can be used for quick, gap-free fastening of wood-to-wood connections. Possible areas of application include furniture construction, interior fittings or timber construction in dry interior or damp areas. CharacteristicsHead shape: Countersunk milling pocket headHead details: Milling pocketsLength: 35 mm Diameter: 3.5 mm Packaging: 1000 pieces/ packThread type: Wood screw threadThread design: Partial threadThread form: Coarse threadTip shape: Tip with tip cutterMaterial: Hardened steelSurface: GalvanisedColour: SilverSuitable for substrate: Wood, wood-based material, softwood, cross-laminated timber (CLT), hardwood, LVL RoHS-compliant: YesIdeal power transmission thanks to RW driveMore power thanks to larger contact surface on the bitGreater stability, one-handed working, precise positioning thanks to the plug-in effect and perfect fit of the bitFewer bit changes, 1 bit for many screw diametersCompatibility with the previous AW driveSignificant reduction in the amount of force required to screw in the screwLow splitting effect when plunging the shank due to the displacement milling effect of the end millMinimised risk of screw breakage due to high breaking torqueLow risk of injury from protruding metal chips due to the integration of the end mill into the threadHigh protection of the processing toolsMaximum protection against over-tightening at high feed ratesHigher power transmission in hardwoods due to reinforced, asymmetrical thread flank geometry of the coarse threadBetter anchoring due to higher thread flanksSmooth thread start ensures optimised grooving and biting of the screwLow splitting effect due to the displacing effect of the dome-shaped milling elements in the tipFriction-minimised insertion of the thread enables a reduction in the screw-in force to be appliedHigh strength values and ductilityCoordinated heat treatment guarantees high strength values and at the same time ensures high ductility

This partially threaded screw from Würth can be used for quick, gap-free fastening of wood-to-wood connections. Possible areas of application include furniture construction, interior fittings or timber construction in dry interior or damp areas. CharacteristicsHead shape: Countersunk milling pocket headHead details: Milling pocketsLength: 35 mm Diameter: 4.5 mm Packaging: 250 pieces/ packThread type: Wood screw threadThread design: Partial threadThread form: Coarse threadPoint shape: Point with tip cutterMaterial: Hardened steelSurface: GalvanisedColour: SilverSuitable for substrate: Wood, wood-based material, softwood, cross-laminated timber (CLT), hardwood, LVL RoHS-compliant: YesIdeal power transmission thanks to RW driveMore power thanks to larger contact surface on the bitGreater stability, one-handed working, precise positioning thanks to the plug-in effect and perfect fit of the bitFewer bit changes, 1 bit for many screw diametersCompatibility with the previous AW driveSignificant reduction in the amount of force required to screw in the screwLow splitting effect when plunging the shank due to the displacement milling effect of the end millMinimised risk of screw breakage due to high breaking torqueLow risk of injury from protruding metal chips due to the integration of the end mill into the threadHigh protection of the processing toolsMaximum protection against over-tightening at high feed ratesHigher power transmission in hardwoods due to reinforced, asymmetrical thread flank geometry of the coarse threadBetter anchoring due to higher thread flanksSmooth thread start ensures optimised grooving and biting of the screwLow splitting effect due to the displacing effect of the dome-shaped milling elements in the tipFriction-minimised insertion of the thread enables a reduction in the screw-in force to be appliedHigh strength values and ductilityCoordinated heat treatment guarantees high strength values and at the same time ensures high ductility

This partially threaded screw from Würth can be used for quick, gap-free fastening of wood-to-wood connections. Possible areas of application include furniture construction, interior fittings or timber construction in dry interior or damp areas. CharacteristicsHead shape: Countersunk milling pocket headHead details: Milling pocketsLength: 40 mm Diameter: 4 mm Packaging: 500 pieces/ packThread type: Wood screw threadThread design: Partial threadThread form: Coarse threadTip shape: Tip with tip cutterMaterial: Hardened steelSurface: GalvanisedColour: SilverSuitable for substrate: Wood, wood-based material, softwood, cross-laminated timber (CLT), hardwood, LVL RoHS-compliant: YesIdeal power transmission thanks to RW driveMore power thanks to larger contact surface on the bitGreater stability, one-handed working, precise positioning thanks to the plug-in effect and perfect fit of the bitFewer bit changes, 1 bit for many screw diametersCompatibility with the previous AW driveSignificant reduction in the amount of force required to screw in the screwLow splitting effect when plunging the shank due to the displacement milling effect of the end millMinimised risk of screw breakage due to high breaking torqueLow risk of injury from protruding metal chips due to the integration of the end mill into the threadHigh protection of the processing toolsMaximum protection against over-tightening at high feed ratesHigher power transmission in hardwoods due to reinforced, asymmetrical thread flank geometry of the coarse threadBetter anchoring due to higher thread flanksSmooth thread start ensures optimised grooving and biting of the screwLow splitting effect due to the displacing effect of the dome-shaped milling elements in the tipFriction-minimised insertion of the thread enables a reduction in the screw-in force to be appliedHigh strength values and ductilityCoordinated heat treatment guarantees high strength values and at the same time ensures high ductility

This partially threaded screw from Würth can be used for quick, gap-free fastening of wood-to-wood connections. Possible areas of application include furniture construction, interior fittings or timber construction in dry interior or damp areas. CharacteristicsHead shape: Countersunk milling pocket headHead details: Milling pocketsLength: 50 mm Diameter: 5 mm Packaging: 100 pieces/ packThread type: Wood screw threadThread design: Partial threadThread form: Coarse threadTip shape: Tip with tip cutterMaterial: Hardened steelSurface: GalvanisedColour: SilverSuitable for substrate: Wood, wood-based material, softwood, cross-laminated timber (CLT), hardwood, LVL RoHS-compliant: YesIdeal power transmission thanks to RW driveMore power thanks to larger contact surface on the bitGreater stability, one-handed working, precise positioning thanks to the plug-in effect and perfect fit of the bitFewer bit changes, 1 bit for many screw diametersCompatibility with the previous AW driveSignificant reduction in the amount of force required to screw in the screwLow splitting effect when plunging the shank due to the displacement milling effect of the end millMinimised risk of screw breakage due to high breaking torqueLow risk of injury from protruding metal chips due to the integration of the end mill into the threadHigh protection of the processing toolsMaximum protection against over-tightening at high feed ratesHigher power transmission in hardwoods due to reinforced, asymmetrical thread flank geometry of the coarse threadBetter anchoring due to higher thread flanksSmooth thread start ensures optimised grooving and biting of the screwLow splitting effect due to the displacing effect of the dome-shaped milling elements in the tipFriction-minimised insertion of the thread enables a reduction in the screw-in force to be appliedHigh strength values and ductilityCoordinated heat treatment guarantees high strength values and at the same time ensures high ductility

This partially threaded screw from Würth can be used for quick, gap-free fastening of wood-to-wood connections. Possible areas of application include furniture construction, interior fittings or timber construction in dry interior or damp areas. CharacteristicsHead shape: Countersunk milling pocket headHead details: Milling pocketsLength: 90 mm Diameter: 6 mm Packaging: 100 pieces/ packThread type: Wood screw threadThread design: Partial threadThread form: Coarse threadTip shape: Tip with tip cutterMaterial: Hardened steelSurface: GalvanisedColour: SilverSuitable for substrate: Wood, wood-based material, softwood, cross-laminated timber (CLT), hardwood, LVL RoHS-compliant: YesIdeal power transmission thanks to RW driveMore power thanks to larger contact surface on the bitGreater stability, one-handed working, precise positioning thanks to the plug-in effect and perfect fit of the bitFewer bit changes, 1 bit for many screw diametersCompatibility with the previous AW driveSignificant reduction in the amount of force required to screw in the screwLow splitting effect when plunging the shank due to the displacement milling effect of the end millMinimised risk of screw breakage due to high breaking torqueLow risk of injury from protruding metal chips due to the integration of the end mill into the threadHigh protection of the processing toolsMaximum protection against over-tightening at high feed ratesHigher power transmission in hardwoods due to reinforced, asymmetrical thread flank geometry of the coarse threadBetter anchoring due to higher thread flanksSmooth thread start ensures optimised grooving and biting of the screwLow splitting effect due to the displacing effect of the dome-shaped milling elements in the tipFriction-minimised insertion of the thread enables a reduction in the screw-in force to be appliedHigh strength values and ductilityCoordinated heat treatment guarantees high strength values and at the same time ensures high ductility

Diese Teilgewindeschraube von Würth kann zur schnellen, spaltfreien Befestigung von Holz-Holz-Verbindungen verwendet werden. Mögliche Einsatzbereiche sind z.B. der Möbelbau, Innenausbau oder Holzbau im trockenen Innen- oder Feuchtbereich. EigenschaftenKopfform: SenkfrästaschenkopfKopfdetails: FrästaschenLänge: 80 mm Durchmesser: 6 mm Gebinde: 75 Stück/ PackGewindeart: HolzschraubengewindeGewindeausführung: TeilgewindeGewindeform: GrobgangSpitzenform: Spitze mit KuppenfräserWerkstoff: Stahl gehärtetOberfläche: VerzinktFarbe: SilberGeeignet für Untergrund: Holz, Holzwerkstoff, Nadelholz, Brettsperrholz (BSP), Laubholz, LVL RoHS-konform: JaIdeale Kraftübertragung dank RW-AntriebMehr Power durch größere Kontaktfläche am BitMehr Stabilität, einhändiges Arbeiten, punktgenaues Ansetzen durch Steck-Effekt und perfekten Sitz des BitsWeniger Bitwechsel, 1 Bit für viele SchraubendurchmesserKompatibilität mit dem bisherigen AW-AntriebDeutliche Reduzierung des Kraftaufwandes beim Eindrehen der SchraubeGeringe Spaltwirkung beim Eintauchen des Schaftes durch verdrängendfräsende Wirkung des SchaftfräsersMinimiertes Risiko eines Schraubenabbruches aufgrund hohem BruchdrehmomentGeringes Verletzungsrisiko durch abstehende Metallspäne durch die Integration des Schaftfräsers in das GewindeHohe Schonung der VerarbeitungswerkzeugeMaximale Überdrehsicherheit bei hoher VorschubleistungHöhere Kraftübertragung in Harthölzern aufgrund verstärkter, asymmetrischer Gewindeflankengeometrie des GrobganggewindeBessere Verankerung durch höhere GewindeflankenSanfter Gewindeanlauf sorgt für optimiertes Einstechen und Anbeißen der SchraubeGeringe Spaltwirkung durch verdrängende Wirkung der kuppenförmig angeordneten Fräselemente in der SpitzeReibungsminimiertes Eindrehen des Gewindes ermöglicht Reduzierung der aufzubringenden EinschraubkraftHohe Festigkeitswerte und DuktilitätEine abgestimmte Wärmebehandlung garantiert hohe Festigkeitswerte und gewährleistet gleichzeitig eine hohe Duktilität

This partially threaded screw from Würth can be used for quick, gap-free fastening of wood-to-wood connections. Possible areas of application include furniture construction, interior fittings or timber construction in dry interior or damp areas. CharacteristicsHead shape: Countersunk milling pocket headHead details: Milling pocketsLength: 30 mm Diameter: 3 mm Packaging: 1000 pieces/ packThread type: Wood screw threadThread design: Partial threadThread form: Coarse threadTip shape: Tip with tip cutterMaterial: Hardened steelSurface: GalvanisedColour: SilverSuitable for substrate: Wood, wood-based material, softwood, cross-laminated timber (CLT), hardwood, LVL RoHS-compliant: YesIdeal power transmission thanks to RW driveMore power thanks to larger contact surface on the bitGreater stability, one-handed working, precise positioning thanks to the plug-in effect and perfect fit of the bitFewer bit changes, 1 bit for many screw diametersCompatibility with the previous AW driveSignificant reduction in the amount of force required to screw in the screwLow splitting effect when plunging the shank due to the displacement milling effect of the end millMinimised risk of screw breakage due to high breaking torqueLow risk of injury from protruding metal chips due to the integration of the end mill into the threadHigh protection of the processing toolsMaximum protection against over-tightening at high feed ratesHigher power transmission in hardwoods due to reinforced, asymmetrical thread flank geometry of the coarse threadBetter anchoring due to higher thread flanksSmooth thread start ensures optimised grooving and biting of the screwLow splitting effect due to the displacing effect of the dome-shaped milling elements in the tipFriction-minimised insertion of the thread enables a reduction in the screw-in force to be appliedHigh strength values and ductilityCoordinated heat treatment guarantees high strength values and at the same time ensures high ductility