Go to homepage
€0.00*
Categories

ClayFix clay paint, Indian red 4.0, colour range

€19.00*

Content: 1.5 Kilogramme (€12.67* / 1 Kilogramme)

Prices incl. VAT plus shipping costs

Available, delivery time: 3-8 Tage

Gebinde
Strukturen
Bag
Product number: Clayfix SCGE-1.0.0

Product information "ClayFix clay paint, Indian red 4.0, colour range"

ClayFix clay coating

Clay paint, optionally smooth or with grain, for interiors. ClayFix clay paint offers an easy way to create surfaces with a clay finish. It is available in 146 earth tones, most of which are lighter than the YOSIMA colour palette. Fine grain and coarse grain are available for further texturing. The paint is of high building biology quality, solvent-free and breathable. The dry compound is mixed with water and can be applied to all suitable surfaces using a brush or trowel. ClayFix clay paint is also ideal for spraying.


Colour range

Seven particularly appealing colour ranges were selected from the many possible combinations for mixing the base colours. In each of these ranges, two basic colours were combined in four stages. The resulting colour tones were additionally mixed with white in three stages. These colour spaces are structured identically to the YOSIMA colour spaces, which means that the colours harmonise perfectly with each other.

Product information

Product and application

Clay paint according to DVL TM 06. for interior design (not for splash water areas).

Composition
Coloured loams and clays, talc, chalk, gum arabic, saponin, saponin, iron oxide in RO and BR shades < 1.0%, cellulose fibres, cellulose fibres, methyl cellulose < 1% (water-soluble stabiliser).
Structural aggregates marble sand 0-0.5 mm (fine grain), marble sand 0.5-1 mm (coarse grain).

Properties

Clay paint fine grain (previously brush-on plaster) JADE-GREEN: 1.2 Abrasion 0.07 g (permissible 0.20 g), wet abrasion class 5 according to DIN EN 13300.

Container

10 kg oval ceiling bucket, 5 kg bucket, 1.5 kg small container (bag).
Application

On light-coloured substrates with good absorption behaviour or surfaces pre-treated with DIE WEISSE primer, one coat is usually sufficient. Depending on the substrate and colour requirements, two coats may be necessary. 10 kg for one coat on approx. 60 m² (viscous). 1.5 kg for one coat on approx. 9 m². 10 kg for two coats on approx. 50 m² (low viscosity). 1.5 kg for two coats on approx. 7.5 m². The coverage generally depends on the substrate and the tools used. Storage Dry, cool storage.

storage

unlimited possible
Anwendungen: Innenausbau, Lehmbau, Lehmputz, Wandbeschichtung
Clayfix Farbräume: Sahara-Beige
Gebinde: 1,5 kg
Hersteller: Claytec
Material: Lehm
Produktgruppe: Farben und Grundierungen, Farben
Produktkategorie: Farben/Putze, Innenausbau, Lehmbaustoffe
Strukturen: ohne Korn
Top-Angebot: Lehmbaustoffe
Verpackung: Beutel/Tüte
Versand: Paketversand, Selbstabholung möglich

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Werkzeuge

Bindan EXPRESS Holzleim, B2/D2
Bindan EXPRESS Holzleim, B2/D2
Leimfugen mit BINDAN-RS trocknen transparent auf und sind schimmel- und feuchtigkeitsbeständig nach D2 DIN EN 204. Eine Verfärbung von gerbstoffhaltigen Hölzern ist durch die pH-Neutralität nicht zu erwarten. Vielseitig einsetzbar und bevorzugt verwendet für: Möbelbau, Modellbau, Serienfertigung, Vollholzverleimung, Montageverleimung (Nut und Feder, Dübel, Schlitz und Zapfen), Fugenverleimung, Flächenverleimung (MDF-, HPL-, Hartfaser-, Spanplatten), Furnierarbeiten.Auch für Verleimungen von Holz mit anderen Werkstoffen (Kork, Leder, Textilien, Pappe uvm.).BINDAN-RS erfüllt vollständig die Standards zur Verwendung für Kinderspielzeug, die aktuellen Anforderungen hierfür sind definiert in der Richtlinie 2009/48/EG über die Sicherheit von Spielzeug und der Spielzeugnorm DIN EN 71-3. Da sich diese Vorschriften ständig mit dem Stand der Technik weiterentwickeln, fragen Sie bitte die aktuelle Fassung unserer Erklärung hierzu an.

Content: 0.28 Kilogramme (€31.07* / 1 Kilogramme)

€8.70*

BINDAN Wasserfester Holzleim D3, Propellerleim
BINDAN Wasserfester Holzleim D3, Propellerleim
Inhalt: 525g/FlascheLeimfugen mit BINDAN-P Propellerleim trocknen transparent auf und sind schimmel-, feuchtigkeits- und wasserbeständig nach D3 DIN EN 204. Ideal für alle Holzverleimungen, besonders bei zukünftig hohem Anspruch an Festigkeit und Beständigkeit: Möbel, Türen, Fenster, Vollholz, Montage (Nut und Feder, Dübel, Schlitz und Zapfen), Fugen, Flächen (MDF-, HPL-, Hartfaser-, Spanplatten), Furnierarbeiten und vieles mehr. Auch für Verleimungen von Holz mit anderen Werkstoffen (Kork, Leder, Textilien, Pappe uvm.).Bei einfachen Verleimungen genügt beschweren, keine Zwinge oder Werkzeug notwendig. BINDAN-P Propellerleim erfüllt vollständig die Standards zur Verwendung für Kinderspielzeug, die aktuellen Anforderungen hierfür sind definiert in der Richtlinie 2009/48/EG über die Sicherheit von Spielzeug und der Spielzeugnorm DIN EN 71-3. Da sich diese Vorschriften ständig mit dem Stand der Technik weiterentwickeln, fragen Sie bitte die aktuelle Fassung unserer Erklärung hierzu an.

Content: 0.525 Kilogramme (€22.29* / 1 Kilogramme)

€11.70*

%
Clay colour (wine)
Clay colour (wine)
Kreidezeit clay paint is easy to apply and provides excellent coverage with a velvety matt finish for interior walls and ceilings. Low odour, antistatic, highly diffusible, free from preservatives and synthetic resin binders. Suitable for use on clay plaster and all other load-bearing plasters as well as woodchip, pure paper wallpaper, paper fleece and concrete. CoveragePackage contents are sufficient for up to 8m2 per coat IngredientsWhite clay, marble powder, cellulose fibres, vegetable casein, soda, methyl cellulose, earth and mineral pigmentsPreparing the colourStir the contents of the bag into 1 litre of cold water, use a drill with whisk. Leave to soak for at least 30 minutes, then stir again vigorously. Dilute further with water as required.ApplicationPrime absorbent substrates with casein primer (Art. 145). Apply the clay colour evenly and smoothly with a roller or brush.Storage Can be stored in a dry place for at least 1 yearAttentionPay attention to possible allergies to natural substances. A typical product odour may occur due to the natural raw materials used! Store out of reach of children.

€9.99* €11.50*

%
Claytec, clay adhesive and reinforcing mortar, bag 25 kg
Claytec, clay adhesive and reinforcing mortar, bag 25 kg
Clay adhesive and reinforcing mortar for reinforcing layers on clay boards as well as wood fibre finishing and interior insulation boards. Clay adhesive and reinforcing mortar consists of clay and cellulose. This guarantees optimum workability, even with thin coats. With a compressive strength of 3.9 MPa, which is new for clay mortar, and an adhesive strength of 0.85 MPa, clay bonding and reinforcing mortar guarantees the strength of the entire construction. It is the basis for fine Claytec clay finishing plasters and YOSIMA. With good preparatory work, it can also be simply painted with the Clayfix clay coating system.Data sheet Application videoHow to useAdhesive and bonding mortar as a dry, fine-grained ready-mix for bonding lightweight building and interior insulation boards to various substrates, as a reinforcing mortar on clay building boards, clay-hemp boards, wood fibre insulation and wood fibre finishing boards and mineral foam boards.CompositionSand up to 1.0 mm, clay and loam, talc, perlite, plant fibres and cellulose.Delivery form, yield25 kg bags (makes 17 litres of mortar for 5 m2), 48 bags/pal.StorageCan be stored in a cool, dry place indefinitely.Mortar preparationThe 25 kg dry mix is gradually stirred into 8-9 litres of clean water using a drill (≥ 800 watts) or mixer and stirring paddle (Ø 125 mm). The amount of water added is slightly less for bonding mortar. Working consistency paste-like according to the desired application with a notched trowel or spatula.Work well again after 30 minutes resting time. The mortar is now ready to use.Plaster baseThe substrate must be stable, frost-free, dry, clean, free of salt, sufficiently rough and absorbent. Levelling coats of clay plaster mortar must be completely dry.The surface must be as level as necessary for the bonding described below. Small unevenness (small individual areas up to 5 cm in diameter and 3 mm deep) can be levelled with the adhesive. Larger imperfections must be filled with a suitable mortar and left to dry.ApplicationThe adhesive is applied to the back of the panels to be bonded using a notched trowel or spatula (8-10 mm notches). A thin layer of adhesive should be applied to the entire surface, including the grooves. The first board is applied immediately and pressed firmly onto the substrate; contact must be ensured over the entire surface.Uneven masonry and plaster surfaces are slightly pre-wetted and roughly levelled. The back-coated boards (see above) are pressed in wet-on-wet.Boards can be additionally mechanically fixed as required, e.g. on sloping ceilings and roofs, see corresponding board product sheets or worksheets.As a bonding filler for thick-layer plasters on insulation boards (e.g. for wall surface heating) and similar applications, the slightly stiffer mortar is applied in the same way using a notched trowel or spatula.For reinforcement layers, the 3 mm thick mortar is applied. It can also be sprayed on with a plastering machine; resting times are not necessary for this application. Reinforcement mesh is worked into the surface of the layer while it is still wet.HardeningThe curing time is 24-72 hours, depending on the drying possibilities and absorbency of the substrate. With additional mechanical panel fixing and subsequent thin-layer coating, work can continue immediately.Work samplesAdhesion to the substrate must always be checked with the respective board to be fixed using a sufficiently large working sample. Complaints not resulting from mixing errors at the factory are excluded.

€29.03* €32.19*

Cutting device for Isolena sheep's wool insulation
Cutting device for Isolena sheep's wool insulation
Cutter with circular blade for optimum processing of all Isolena products.This ergonomically adapted tool, for the installation of all Isolena sheep's wool insulation products,enables you to quickly, cleanly and effectively adapt your sheep's wool product to its intended purpose.Cutting the insulation rolls to lengthOn-site bevellingCutting of stripsYou can also order this product on loan with your purchased Isolena products.The purchase price will be charged to you as a deposit and credited back after return.The hire charge is EUR 50 for the first two weeks and EUR 15 for each additional week or part thereof.week EUR 15. The amount incurred will be deducted from the deposit paid after the device has been returned.The borrower must bear the cost of returning the equipment.The borrower will be charged EUR 29 for a defective circular blade.

€294.06*

Glass fabric/reinforcement fabric for clay plasters, roll 50 m
Glass fabric/reinforcement fabric for clay plasters, roll 50 m
Surface reinforcement for clay adhesive and reinforcing mortar and all clay plasters. It is tension-resistant, very fine and particularly easy to work with.Clay plasters worksheetApplicationAs surface reinforcement for clay plasters, HFD interior insulation, cladding made of clay building boards and wood fibre boards, cladding made of clay building boards, clay-hemp boards and wood fibre boards.TextureLeno fabric made of glass fibre yarn/roving, finished with polymer finish for scrims. Weight approx. 110g/m², warp/weft approx. 14/14 Fa per 10 cm, clear mesh size approx. 6 x 6 mm, made in Germany, alkali-resistant, shift-proofDelivery formRoll, width 100 cm, length 50 mStorageDry, airy and protected from direct sunlight for at least three years.Material requirementAs for m² plaster surface plus 10% to 20% reserve for offcuts and overlaps.ApplicationSurface reinforcement: The mesh is applied to the freshly applied, still plastic mortar and rubbed in with the felt board. The overlap in the joint area must be approx. 10 cm. (For cladding made of clay building boards, clay hemp boards and wood fibre finishing boards, the fabric is usually worked into the clay adhesive and reinforcing mortar over the entire surface).

Content: 50 Square metre (€0.99* / 1 Square metre)

€49.50*

Kreidezeit floor hard wax, 1 litre
Kreidezeit floor hard wax, 1 litre
Kreidezeit Floor Hard Wax is used to treat oiled surfaces, providing additional protection for floors, furniture, doors and much more. This silky gloss protection protects oiled surfaces (wood, cork, stone, ceramic) and linoleum from dirt and water.The resulting hardness is largely due to the carnauba wax it contains, which is the hardest natural wax.The floor hard wax cannot be used in wet rooms for kitchen worktops or on untreated, absorbent surfaces.Product informationProduct propertiesready to use, pastyTread-resistant, dirt and water repellenttransparent, silky glossdiffusible, antistatic, warm to the toucheasy to apply, easy to repairresistant to saliva and perspiration in accordance with DIN 53160free of cobalt, lead and bariumFull declarationLinseed oil, balsamic turpentine oil, carnauba wax, beeswax, linseed oil stand oil, wood oil stand oil, manganese drierApplicationApply Floor Hard Wax evenly and very thinly with a lint-free cloth. Avoid protrusions.For larger areas: Apply floor hard wax either in patches with a spatula or heat to approx. 60 °C, drizzle onto the floor and then massage in evenly with a floor polisher.After 4 - 6 hours at the latest, the surface must be polished with a lint-free cloth, a brush, a floor polisher or a polishing machine until the surface has a silky lustre. Processing temperature at least 10 °C.Dried residues that are not removed are difficult to polish off later and remain as a white haze. These residues can be removed with a cleaning pad (machine) or with a pot sponge (Scotch Brite).Drying timeThe waxed surface must be polished after 4 - 6 hours at approx. 20 °C. The wax is fully hardened after approx. 24-48 hours.Suitable toolsLint-free cloths, surface/floor spatula. For larger surfaces: Floor polishersCleaning the toolsImmediately after use, wash with balsamic turpentine oil and then with olive care soap or Corfu soap.

€29.00*

%
Kreidezeit linseed oil/stand oil
Kreidezeit linseed oil/stand oil
Linseed oil stand oil is pre-dried linseed oil with a relatively long drying time; linseed oil varnish is linseed oil with a drying accelerator (manganese dryer).Linseed oil stand oil is produced on the basis of linseed oil and is used as an additive for linseed oil paints, as a binder for enamel paints, oil resin paints and printing inks.Linseed oil stand oil is a high-quality raw material for the production of oil paints and glazes.

Content: 0.5 Litres (€14.00* / 1 Litres)

€7.00* €9.00*

Kreidezeit mould first aid kit
Kreidezeit mould first aid kit
The ecological Kreidezeit Mould First Aid Kit is free from biocides and contains everything that can be used against minor mould infestations.Minor mould infestation can be found in the majority of homes today and can lead to significant health problems. According to the World Health Organisation (WHO), residents of such homes have an increased risk of developing respiratory infections and asthma as well as allergies. The Kreidezeit mould first aid kit offers a simple solution to such problems. The package contains completely ecological, vegan products that are also free of plastics and biocides and can be used to consistently prevent and combat mould. Contents: 500 ml KREIDEZEIT alcohol 250 ml mould cracker 1 litre limewash paint 1 pair of rubber gloves 1 pair of safety goggles 1 professional flat brush 50 mm 1 mould information flyerProduct InformationAlcohol Safety Data Sheet Alcohol Product informationMouldcracker Safety data sheet Mouldcracker Product informationSump lime paint Safety data sheet Sump lime paint Our biocide-free solutionAlcohol removes minor mould stains with a one-off effect. Our pure alcohol can quickly and easily dissolve and remove mould stains. The mould is removed superficially, but this is only "first aid". Afterwards, the following products should be used as soon as possible: Mould Cracker encapsulates spores, binds them permanently and thus protects against their further spread. At the same time, the surface becomes highly alkaline, which prevents new growth. The mould cracker is not colourfast and should be painted over with marsh lime paint if necessary. It adheres to almost any surface and is also suitable, for example, for restoring infested back walls of cupboards. Effective for many months. Lime works best against fungi due to its long-lasting alkalinity. Lime paints are our tried and tested products for the permanent removal and colour masking of mould. A double coat is usually sufficient to prevent mould from returning. Our recommendations relate to mould infestation of max. 5 m². In the case of massive infestation of entire rooms or even buildings, a specialist should be called in. If in doubt, you can discuss your concerns with our technical advisors. Structural defects and special features can impair the effect of the products presented.

€40.00*

%
Kreidezeit stainless steel cleaner, tin 500 g
Kreidezeit stainless steel cleaner, tin 500 g
Kreidezeit stainless steel cleaner is a fine surface cleaner made from natural raw materials and can be used on steel, glass, enamel and chrome. There are numerous areas of application such as in the household, in the garden, in the workshop, for stainless steel grills and much more. There is also a viscose sponge made from renewable raw materials.

Content: 0.5 Kilogramme (€17.98* / 1 Kilogramme)

€8.99* €9.90*

Kreidezeit Vega primer, bag 250 g
Kreidezeit Vega primer, bag 250 g
Vega primer, container size 250 g Range 40 - 60 m² Consumption per m² 20 g Exact consumption to be determined on the object Product information Safety data sheetKreidezeit Vega Primer is a colourless, transparent primer that is used for subsequent coats of paint and thin-layer plaster applications indoors. It offers a wide range of application options. Kreidezeit Vega Primer is particularly suitable for priming clay and lime plasters, as it has no reducing effect on the vapour absorption of plasters (sD value < 0.01m).It can be used on all untreated and absorbent surfaces such as clay, lime, lime-cement and gypsum plasters, gypsum plasterboard and gypsum fibreboards, stone and concrete, but is unsuitable for all smooth, non-absorbent surfaces and permanently damp substrates.Recommended for priming absorbent old coatings before renovation: e.g. KREIDEZEIT casein paints, clay paints, limewash paints and emulsion paints.For transparent consolidation of plasters, especially clay plasters in interior areas; here it is necessary to create test areas (see "Tips").The use of Vega primer within the various KREIDEZEIT paint and plaster systems is described in the corresponding product information.PropertiesPowder for mixing with waterReduces the absorbency of highly absorbent substrates and equalises different absorbencies of the substrateStrengthens slightly sanding substratesVery good penetration capacityColourless transparentEasy to applyVery economicalhighly diffusiblefree from preservativescolour residues are compostableveganFull declaration: vegetable casein, soda Mixing the primerA 10 litre bucket and a mixer (drill + whisk) are best suited for mixing the primer.Add the contents of the bag of Vega primer (250 g) to 2 litres of clean, cold water, stirring constantly. Ensure that all lumps are stirred in. After a swelling time of approx. 30 minutes, stir again vigorously and dilute with 6 litres of water. ApplicationApply Vega Primer evenly and generously. Only apply as much liquid as can be absorbed by the substrate.Remove any excess (wet, shiny areas) with a cloth before drying.Processing temperature at least 8°C.The mixed primer must be applied on the same day. Do not use primer that smells bad or foul under any circumstances: Danger of long-lasting odour problems even after drying!Drying time in a normal climateDry after approx. 8 hours at 20°C and can be recoated with paints or plasters based on lime putty or casein.Suitable toolsSuitable tools are good facade and ceiling brushes made of natural bristles. Do not spray or apply casein primer with a roller.You will find good façade and ceiling brushes in our range. Facade brush, lime brush, ceiling brushCleaning the toolsimmediately after use with water.

Content: 0.25 Kilogramme (€53.20* / 1 Kilogramme)

€13.30*

Kreidezeit window care set
Kreidezeit window care set
The Kreidezeit window care set protects wooden windows that have been treated with Kreidezeit stand oil paints or coloured wood stains from weakening the colour intensity and then protects them. Furthermore, soiled paintwork can be cleaned with the enclosed care soap. The set contains 100ml care soap and 100ml care oil as well as 1 set of instructions. Product informationThe window care set offers excellent protection against coloured renovation coats for comparatively little effort, as long-term and regular maintenance is required to maintain the function-protecting surface and appearance, which is shortened with the Kreidezeit window care set. Full declarationMaintenance soap: Olive oil soap. Maintenance oil: linseed oil, linseed oil stand oil, wood oil stand oil, manganese drierInspectionCheck painted surfaces at least every six months for soiling and damage (visual inspection) and clean and maintain as required . The gloss behaviour of the painted surfaces should be assessed during the inspection and cleaning at least every six months. Areas that have lost their lustre must be treated immediately with Kreidezeit window care oil. Areas that still have sufficient gloss should not be treated, as too frequent care on surfaces that are still glossy can lead to a greasy appearance and a sticky surface. Kreidezeit stand oil paints and wood stains are environmentally friendly and therefore deliberately not treated with fungicides. Even with fungicide-treated conventional wood coating systems, condensation-induced fungal growth on the surface is a known phenomenon (shadow formation, blackening). It is therefore important to check the surfaces for fungal infestation (usually small black spots) at least every six months and to remove this immediately with water and Kreidezeit care soap.The condition of the painted weatherboards should be checked every six months because they are most exposed to the weather. Cleaning Do not clean the wooden windows immediately after installation. Paint and silicone need approx. 4 weeks to cure completely. Clean the metal rain protection rail after the construction period. The water drainage slots must not be blocked. Clean dirt with a soft sponge and cleaning soap (1 tablespoon of soap diluted in 1 litre of water). Heavy soiling can also be treated with a more concentrated soap. Care and protection As a rule, care is required once a year on sunny and weathered sides and every 2 years on sides facing away from the weather. These intervals can vary considerably depending on the weather conditions and exposure of the surfaces. In principle, however, there are no defined maintenance intervals for the Kreidezeit Stand Oil Paint or Wood Stain System. Allow the cleaned surfaces to dry completely. The areas that have lost their lustre, especially on the sides exposed to the sun and weather, should be rubbed very thinly with a cloth soaked in maintenance oil. After 10 - 15 minutes, rub with a dry cloth and remove excess oil (excess oil that is not removed can be very shiny and sticky!) The colour intensity will return. Processing and drying temperature at least 10°C for at least 48 hours. Renovation Renovation is necessary at the latest when exterior stand oil paints are heavily weathered, chalk intensively or the wood surface becomes visible, or when the pigments in wood stains have been washed off by rain. The surfaces are cleaned with maintenance soap and areas that are still shiny are lightly sanded (grain size P 120-150).Renovation coats on Kreidezeit wood stain are carried out with wood stain for interior/exterior tinted with Kreidezeit pigments up to 175 g pigment per 1 litre of wood stain or coloured wood stain. Renovation coats on Kreidezeit stand oil paints are carried out with stand oil paint - full-fat. The weatherboards on windows should be repainted on the sunny sides every 2 years at the latest.

€17.20*

Kreidezeit worktop oil 0.5l
Kreidezeit worktop oil 0.5l
Kreidezeit worktop oil is solvent-free, hard-wearing and absorbs deeply when used, so that it can be used as surface protection for furniture, tables and worktops made from almost all types of wood. The product is suitable for the initial treatment of untreated wood as well as for its maintenance care indoors and is also tested in accordance with LFGB §31, which is why it is suitable for food contact.Product data sheet Safety data sheet The diffusible worktop oil can also be coloured with earth and mineral pigments depending on the purpose and use.Properties LFGB §31 tested, suitable for food contact.Resistant to saliva and perspiration according to DIN 53160Deeply penetrating Very hard-wearing solvent- and water-free dirt and water repellenteconomical diffusible does not burst, crack or peel easy to maintain free of lead, barium and cobalt made from natural and renewable raw materials veganFull declaration Fermentation alcohol (denatured with MEK, IPA, Bitrex), wax-free shellac, linseed oil varnish, titanium white, talcum, quartz, silicic acidProcessingRemove dirt from the substrate as far as possible (brush off, wash off).Stir the product thoroughly before use and apply thinly and evenly to the dry substrate using a brush or roller. One coat is usually sufficient to block weak stains, for heavy stains apply 2-3 coats with intermediate drying and without intermediate sanding.Can be recoated with KREIDEZEIT wall paints after approx. 24 hours.For subsequent coats of white wall paint, the insulating primer can be applied selectively. For subsequent coats of coloured wall paint or wall glazes, the insulating primer must be applied over the entire surface, otherwise coloured marks may appear. If glossy areas have been created by applying too thick a coat, the dried shellac insulating primer must be sanded to a matt finish before painting over with wall paint. The product can be diluted with KREIDEZEIT Alcohol up to 10 % vol.Drying timeDust-dry after approx. 30 minutes. Dry and recoatable after approx. 12 hours at 20 °C.Cleaning the tools Immediately after use with alcohol, then wash with Marseille Soap, Corfu Soap or Olive Care Soap and water.

Content: 0.5 Litres (€35.40* / 1 Litres)

€17.70*

NELA Premium PlasticFLEX smoothing trowel with 1 mm blade thickness, 280 x 110 mm
NELA Premium PlasticFLEX smoothing trowel with 1 mm blade thickness, 280 x 110 mm
Extra light - extra sturdy and durable100% Made in GermanyThe NELA Premium PlasticFLEX smoothing trowel with ergonomically perfect handle designProduct features:- Most stable handle attachment thanks to M8 nut- Rounded corners for working without a degree- Plastic blade- Aluminium die-cast support made of special alloy- High-tech adhesive tape for the permanently elastic connection of the plastic blade and the stainless steel support plate- Extra fine-ground edges and corners- Temperature and solvent resistant

€35.90*

Nela, chrome steel smoothing trowel made of special stainless steel, 180 x 120 mm
Nela, chrome steel smoothing trowel made of special stainless steel, 180 x 120 mm
- Ergonomic KORK in cork with ergonomically perfect handle design.- Most stable handle fastening thanks to M8 nut- Blade made from special stainless steel- Blade made of hardened, stainless chrome steel:- More flexibility and durability.Pre-bent blade with bevelled edges:- Ideal for concrete, plaster, drywall, stucco and pool coatings.- Chamfered edges for optimum processing of all common materials.- Blade underside ground crosswise.

€45.50*

Schwan Berner plastering trowel / straight neck length 260 mm
Schwan Berner plastering trowel / straight neck length 260 mm
Product description:with straight neckCraftsman qualityQuality tool from German manufacture / "Made in Germany"Solid plastic handle/soft handle

€9.98*

Schwan notched trowel/notched trowel 280 mm x 130 mm, blade thickness 0.7 mm
Schwan notched trowel/notched trowel 280 mm x 130 mm, blade thickness 0.7 mm
The professional tool for smoothing, mounting and embedding fabric. The notched trowels in our "Standard" series ensure optimum results: The application of tile adhesive and floor adhesive is quick and precise; the serrated edges allow you to work sparingly. With this quality notched trowel, you are investing in high quality and durability - guaranteed.Product description:STANDARD" seriesDimensions: 280 x 130 mmBlade thickness: 0.7 mmWith die-cast zinc supportQuality tool from German manufacture / "Made in Germany"

€5.83*

Sound felt strips made of 100% Isolena virgin sheep's wool, bulk density 100kg/m³
Sound felt strips made of 100% Isolena virgin sheep's wool, bulk density 100kg/m³
Isolena's highly stabilised sound felt strips are used for sound decoupling in many areas of application.Data sheet brochureSound absorber as a support for horizontal and sloping surfaces.Highly stabilised sound felt as underlay strips for sound decoupling between subfloor and construction.Thickness: 9 mmWidth: 100 mmLength roll: 10 mRaw material: 100% virgin sheep's wool, renewable and recyclable without additivesWool protection: Ionic ProtectDensity: 100 kg/m³Areas of application: Timber construction, acoustic ceilings, interior fittings and many other...

€17.90*

Steico multi Primer 1ltr. incl. application roller / Solvent-free adhesion primer
Steico multi Primer 1ltr. incl. application roller / Solvent-free adhesion primer
SetPrice incl. application roller with 4 replacement rollers (1 litre Steico MultiPrimer + 1 roller + 5 rollers)Improves the adhesion of bonds to wood-based panels and other absorbent substrates. The solvent-free adhesion promoter - Fast flash-off time - Strong depth effect - Can be applied on substrates as cold as -10 °C - Efficient material application thanks to practical dispenser bottle - Good water resistance - For various absorbent, mineral substrates (e.g. gypsum fibre boards, concrete, masonry) - For wood and wood-based materials (e.g. STEICO wood fibre insulation materials) Application STEICOmulti primer - Shake the container well before use - The material is applied to the substrate via the guide opening of the container and spread evenly with a brush or paint roller. The substrate must be dry and free of grease and dust - Before applying and pressing on STEICOmulti tape, allow the STEICOmulti primer to flash off until transparent (colour change allows visual inspection) - STEICOmulti primer can be removed with water when fresh. When the primer has hardened, cleaning is generally only possible mechanically

€24.99*

%
Steico multi renova 1.50m (75m²) vapour control layer
Steico multi renova 1.50m (75m²) vapour control layer
Moisture-variable vapour control layer for indoor use on roofs, walls and ceilings. It is particularly tear-resistant (grid reinforcement) made of 3-ply PP fleece. Special features: - Particularly robust and flexible - 3-ply, coated PP fleece, grid-reinforced - Extremely high tear resistance - Moisture variable, sd value 0.4 - 35 m - Suitable for blow-in insulation and matt insulation materials - Suitable for uphill and downhill installation with sufficient over-insulation with STEICO wood fibre underlay boards

Content: 75 Square metre (€3.05* / 1 Square metre)

€229.00* €245.00*

Steico multi UDB 1.50m (75m²) sarking and underlay membrane
Steico multi UDB 1.50m (75m²) sarking and underlay membrane
Highly diffusion-open sarking, sarking and airtight membranefor new build and renovationSpecial features: 3-ply, tear-resistant and flexible2 integrated self-adhesive zonesAirtight, highly diffusion-open and resistant to driving rainExtremely high tear resistanceFree weathering possible for up to 3 monthsFunctional layer reinforced on both sides with PP fibre fleece

Content: 75 Square metre (€3.05* / 1 Square metre)

€229.00*

%
Swan, Berlin trowel, swan neck, hardened blade
Swan, Berlin trowel, swan neck, hardened blade
Product description:With swan neckHardened steel bladeQuality tool from German manufacture / "Made in Germany"Solid plastic handle/soft handle

€15.99* €18.92*

%
Swan, North German trowel in the shape of a Finnish masonry trowel, 160 mm
Swan, North German trowel in the shape of a Finnish masonry trowel, 160 mm
Product description:Length 160 mmwith straight neckHardened steel bladeCraftsman qualityQuality tool from German manufacture / Made in GermanyThe picture shown does not correspond exactly to the product!

€9.99* €14.26*

alternative Produkte

Bindan EXPRESS Holzleim, B2/D2
Bindan EXPRESS Holzleim, B2/D2
Leimfugen mit BINDAN-RS trocknen transparent auf und sind schimmel- und feuchtigkeitsbeständig nach D2 DIN EN 204. Eine Verfärbung von gerbstoffhaltigen Hölzern ist durch die pH-Neutralität nicht zu erwarten. Vielseitig einsetzbar und bevorzugt verwendet für: Möbelbau, Modellbau, Serienfertigung, Vollholzverleimung, Montageverleimung (Nut und Feder, Dübel, Schlitz und Zapfen), Fugenverleimung, Flächenverleimung (MDF-, HPL-, Hartfaser-, Spanplatten), Furnierarbeiten.Auch für Verleimungen von Holz mit anderen Werkstoffen (Kork, Leder, Textilien, Pappe uvm.).BINDAN-RS erfüllt vollständig die Standards zur Verwendung für Kinderspielzeug, die aktuellen Anforderungen hierfür sind definiert in der Richtlinie 2009/48/EG über die Sicherheit von Spielzeug und der Spielzeugnorm DIN EN 71-3. Da sich diese Vorschriften ständig mit dem Stand der Technik weiterentwickeln, fragen Sie bitte die aktuelle Fassung unserer Erklärung hierzu an.

Content: 0.28 Kilogramme (€31.07* / 1 Kilogramme)

€8.70*

BINDAN Wasserfester Holzleim D3, Propellerleim
BINDAN Wasserfester Holzleim D3, Propellerleim
Inhalt: 525g/FlascheLeimfugen mit BINDAN-P Propellerleim trocknen transparent auf und sind schimmel-, feuchtigkeits- und wasserbeständig nach D3 DIN EN 204. Ideal für alle Holzverleimungen, besonders bei zukünftig hohem Anspruch an Festigkeit und Beständigkeit: Möbel, Türen, Fenster, Vollholz, Montage (Nut und Feder, Dübel, Schlitz und Zapfen), Fugen, Flächen (MDF-, HPL-, Hartfaser-, Spanplatten), Furnierarbeiten und vieles mehr. Auch für Verleimungen von Holz mit anderen Werkstoffen (Kork, Leder, Textilien, Pappe uvm.).Bei einfachen Verleimungen genügt beschweren, keine Zwinge oder Werkzeug notwendig. BINDAN-P Propellerleim erfüllt vollständig die Standards zur Verwendung für Kinderspielzeug, die aktuellen Anforderungen hierfür sind definiert in der Richtlinie 2009/48/EG über die Sicherheit von Spielzeug und der Spielzeugnorm DIN EN 71-3. Da sich diese Vorschriften ständig mit dem Stand der Technik weiterentwickeln, fragen Sie bitte die aktuelle Fassung unserer Erklärung hierzu an.

Content: 0.525 Kilogramme (€22.29* / 1 Kilogramme)

€11.70*

%
Clay colour (wine)
Clay colour (wine)
Kreidezeit clay paint is easy to apply and provides excellent coverage with a velvety matt finish for interior walls and ceilings. Low odour, antistatic, highly diffusible, free from preservatives and synthetic resin binders. Suitable for use on clay plaster and all other load-bearing plasters as well as woodchip, pure paper wallpaper, paper fleece and concrete. CoveragePackage contents are sufficient for up to 8m2 per coat IngredientsWhite clay, marble powder, cellulose fibres, vegetable casein, soda, methyl cellulose, earth and mineral pigmentsPreparing the colourStir the contents of the bag into 1 litre of cold water, use a drill with whisk. Leave to soak for at least 30 minutes, then stir again vigorously. Dilute further with water as required.ApplicationPrime absorbent substrates with casein primer (Art. 145). Apply the clay colour evenly and smoothly with a roller or brush.Storage Can be stored in a dry place for at least 1 yearAttentionPay attention to possible allergies to natural substances. A typical product odour may occur due to the natural raw materials used! Store out of reach of children.

€9.99* €11.50*

%
Claytec, clay adhesive and reinforcing mortar, bag 25 kg
Claytec, clay adhesive and reinforcing mortar, bag 25 kg
Clay adhesive and reinforcing mortar for reinforcing layers on clay boards as well as wood fibre finishing and interior insulation boards. Clay adhesive and reinforcing mortar consists of clay and cellulose. This guarantees optimum workability, even with thin coats. With a compressive strength of 3.9 MPa, which is new for clay mortar, and an adhesive strength of 0.85 MPa, clay bonding and reinforcing mortar guarantees the strength of the entire construction. It is the basis for fine Claytec clay finishing plasters and YOSIMA. With good preparatory work, it can also be simply painted with the Clayfix clay coating system.Data sheet Application videoHow to useAdhesive and bonding mortar as a dry, fine-grained ready-mix for bonding lightweight building and interior insulation boards to various substrates, as a reinforcing mortar on clay building boards, clay-hemp boards, wood fibre insulation and wood fibre finishing boards and mineral foam boards.CompositionSand up to 1.0 mm, clay and loam, talc, perlite, plant fibres and cellulose.Delivery form, yield25 kg bags (makes 17 litres of mortar for 5 m2), 48 bags/pal.StorageCan be stored in a cool, dry place indefinitely.Mortar preparationThe 25 kg dry mix is gradually stirred into 8-9 litres of clean water using a drill (≥ 800 watts) or mixer and stirring paddle (Ø 125 mm). The amount of water added is slightly less for bonding mortar. Working consistency paste-like according to the desired application with a notched trowel or spatula.Work well again after 30 minutes resting time. The mortar is now ready to use.Plaster baseThe substrate must be stable, frost-free, dry, clean, free of salt, sufficiently rough and absorbent. Levelling coats of clay plaster mortar must be completely dry.The surface must be as level as necessary for the bonding described below. Small unevenness (small individual areas up to 5 cm in diameter and 3 mm deep) can be levelled with the adhesive. Larger imperfections must be filled with a suitable mortar and left to dry.ApplicationThe adhesive is applied to the back of the panels to be bonded using a notched trowel or spatula (8-10 mm notches). A thin layer of adhesive should be applied to the entire surface, including the grooves. The first board is applied immediately and pressed firmly onto the substrate; contact must be ensured over the entire surface.Uneven masonry and plaster surfaces are slightly pre-wetted and roughly levelled. The back-coated boards (see above) are pressed in wet-on-wet.Boards can be additionally mechanically fixed as required, e.g. on sloping ceilings and roofs, see corresponding board product sheets or worksheets.As a bonding filler for thick-layer plasters on insulation boards (e.g. for wall surface heating) and similar applications, the slightly stiffer mortar is applied in the same way using a notched trowel or spatula.For reinforcement layers, the 3 mm thick mortar is applied. It can also be sprayed on with a plastering machine; resting times are not necessary for this application. Reinforcement mesh is worked into the surface of the layer while it is still wet.HardeningThe curing time is 24-72 hours, depending on the drying possibilities and absorbency of the substrate. With additional mechanical panel fixing and subsequent thin-layer coating, work can continue immediately.Work samplesAdhesion to the substrate must always be checked with the respective board to be fixed using a sufficiently large working sample. Complaints not resulting from mixing errors at the factory are excluded.

€29.03* €32.19*

Cutting device for Isolena sheep's wool insulation
Cutting device for Isolena sheep's wool insulation
Cutter with circular blade for optimum processing of all Isolena products.This ergonomically adapted tool, for the installation of all Isolena sheep's wool insulation products,enables you to quickly, cleanly and effectively adapt your sheep's wool product to its intended purpose.Cutting the insulation rolls to lengthOn-site bevellingCutting of stripsYou can also order this product on loan with your purchased Isolena products.The purchase price will be charged to you as a deposit and credited back after return.The hire charge is EUR 50 for the first two weeks and EUR 15 for each additional week or part thereof.week EUR 15. The amount incurred will be deducted from the deposit paid after the device has been returned.The borrower must bear the cost of returning the equipment.The borrower will be charged EUR 29 for a defective circular blade.

€294.06*

Glass fabric/reinforcement fabric for clay plasters, roll 50 m
Glass fabric/reinforcement fabric for clay plasters, roll 50 m
Surface reinforcement for clay adhesive and reinforcing mortar and all clay plasters. It is tension-resistant, very fine and particularly easy to work with.Clay plasters worksheetApplicationAs surface reinforcement for clay plasters, HFD interior insulation, cladding made of clay building boards and wood fibre boards, cladding made of clay building boards, clay-hemp boards and wood fibre boards.TextureLeno fabric made of glass fibre yarn/roving, finished with polymer finish for scrims. Weight approx. 110g/m², warp/weft approx. 14/14 Fa per 10 cm, clear mesh size approx. 6 x 6 mm, made in Germany, alkali-resistant, shift-proofDelivery formRoll, width 100 cm, length 50 mStorageDry, airy and protected from direct sunlight for at least three years.Material requirementAs for m² plaster surface plus 10% to 20% reserve for offcuts and overlaps.ApplicationSurface reinforcement: The mesh is applied to the freshly applied, still plastic mortar and rubbed in with the felt board. The overlap in the joint area must be approx. 10 cm. (For cladding made of clay building boards, clay hemp boards and wood fibre finishing boards, the fabric is usually worked into the clay adhesive and reinforcing mortar over the entire surface).

Content: 50 Square metre (€0.99* / 1 Square metre)

€49.50*

Kreidezeit floor hard wax, 1 litre
Kreidezeit floor hard wax, 1 litre
Kreidezeit Floor Hard Wax is used to treat oiled surfaces, providing additional protection for floors, furniture, doors and much more. This silky gloss protection protects oiled surfaces (wood, cork, stone, ceramic) and linoleum from dirt and water.The resulting hardness is largely due to the carnauba wax it contains, which is the hardest natural wax.The floor hard wax cannot be used in wet rooms for kitchen worktops or on untreated, absorbent surfaces.Product informationProduct propertiesready to use, pastyTread-resistant, dirt and water repellenttransparent, silky glossdiffusible, antistatic, warm to the toucheasy to apply, easy to repairresistant to saliva and perspiration in accordance with DIN 53160free of cobalt, lead and bariumFull declarationLinseed oil, balsamic turpentine oil, carnauba wax, beeswax, linseed oil stand oil, wood oil stand oil, manganese drierApplicationApply Floor Hard Wax evenly and very thinly with a lint-free cloth. Avoid protrusions.For larger areas: Apply floor hard wax either in patches with a spatula or heat to approx. 60 °C, drizzle onto the floor and then massage in evenly with a floor polisher.After 4 - 6 hours at the latest, the surface must be polished with a lint-free cloth, a brush, a floor polisher or a polishing machine until the surface has a silky lustre. Processing temperature at least 10 °C.Dried residues that are not removed are difficult to polish off later and remain as a white haze. These residues can be removed with a cleaning pad (machine) or with a pot sponge (Scotch Brite).Drying timeThe waxed surface must be polished after 4 - 6 hours at approx. 20 °C. The wax is fully hardened after approx. 24-48 hours.Suitable toolsLint-free cloths, surface/floor spatula. For larger surfaces: Floor polishersCleaning the toolsImmediately after use, wash with balsamic turpentine oil and then with olive care soap or Corfu soap.

€29.00*

%
Kreidezeit linseed oil/stand oil
Kreidezeit linseed oil/stand oil
Linseed oil stand oil is pre-dried linseed oil with a relatively long drying time; linseed oil varnish is linseed oil with a drying accelerator (manganese dryer).Linseed oil stand oil is produced on the basis of linseed oil and is used as an additive for linseed oil paints, as a binder for enamel paints, oil resin paints and printing inks.Linseed oil stand oil is a high-quality raw material for the production of oil paints and glazes.

Content: 0.5 Litres (€14.00* / 1 Litres)

€7.00* €9.00*

Kreidezeit mould first aid kit
Kreidezeit mould first aid kit
The ecological Kreidezeit Mould First Aid Kit is free from biocides and contains everything that can be used against minor mould infestations.Minor mould infestation can be found in the majority of homes today and can lead to significant health problems. According to the World Health Organisation (WHO), residents of such homes have an increased risk of developing respiratory infections and asthma as well as allergies. The Kreidezeit mould first aid kit offers a simple solution to such problems. The package contains completely ecological, vegan products that are also free of plastics and biocides and can be used to consistently prevent and combat mould. Contents: 500 ml KREIDEZEIT alcohol 250 ml mould cracker 1 litre limewash paint 1 pair of rubber gloves 1 pair of safety goggles 1 professional flat brush 50 mm 1 mould information flyerProduct InformationAlcohol Safety Data Sheet Alcohol Product informationMouldcracker Safety data sheet Mouldcracker Product informationSump lime paint Safety data sheet Sump lime paint Our biocide-free solutionAlcohol removes minor mould stains with a one-off effect. Our pure alcohol can quickly and easily dissolve and remove mould stains. The mould is removed superficially, but this is only "first aid". Afterwards, the following products should be used as soon as possible: Mould Cracker encapsulates spores, binds them permanently and thus protects against their further spread. At the same time, the surface becomes highly alkaline, which prevents new growth. The mould cracker is not colourfast and should be painted over with marsh lime paint if necessary. It adheres to almost any surface and is also suitable, for example, for restoring infested back walls of cupboards. Effective for many months. Lime works best against fungi due to its long-lasting alkalinity. Lime paints are our tried and tested products for the permanent removal and colour masking of mould. A double coat is usually sufficient to prevent mould from returning. Our recommendations relate to mould infestation of max. 5 m². In the case of massive infestation of entire rooms or even buildings, a specialist should be called in. If in doubt, you can discuss your concerns with our technical advisors. Structural defects and special features can impair the effect of the products presented.

€40.00*

%
Kreidezeit stainless steel cleaner, tin 500 g
Kreidezeit stainless steel cleaner, tin 500 g
Kreidezeit stainless steel cleaner is a fine surface cleaner made from natural raw materials and can be used on steel, glass, enamel and chrome. There are numerous areas of application such as in the household, in the garden, in the workshop, for stainless steel grills and much more. There is also a viscose sponge made from renewable raw materials.

Content: 0.5 Kilogramme (€17.98* / 1 Kilogramme)

€8.99* €9.90*

Kreidezeit Vega primer, bag 250 g
Kreidezeit Vega primer, bag 250 g
Vega primer, container size 250 g Range 40 - 60 m² Consumption per m² 20 g Exact consumption to be determined on the object Product information Safety data sheetKreidezeit Vega Primer is a colourless, transparent primer that is used for subsequent coats of paint and thin-layer plaster applications indoors. It offers a wide range of application options. Kreidezeit Vega Primer is particularly suitable for priming clay and lime plasters, as it has no reducing effect on the vapour absorption of plasters (sD value < 0.01m).It can be used on all untreated and absorbent surfaces such as clay, lime, lime-cement and gypsum plasters, gypsum plasterboard and gypsum fibreboards, stone and concrete, but is unsuitable for all smooth, non-absorbent surfaces and permanently damp substrates.Recommended for priming absorbent old coatings before renovation: e.g. KREIDEZEIT casein paints, clay paints, limewash paints and emulsion paints.For transparent consolidation of plasters, especially clay plasters in interior areas; here it is necessary to create test areas (see "Tips").The use of Vega primer within the various KREIDEZEIT paint and plaster systems is described in the corresponding product information.PropertiesPowder for mixing with waterReduces the absorbency of highly absorbent substrates and equalises different absorbencies of the substrateStrengthens slightly sanding substratesVery good penetration capacityColourless transparentEasy to applyVery economicalhighly diffusiblefree from preservativescolour residues are compostableveganFull declaration: vegetable casein, soda Mixing the primerA 10 litre bucket and a mixer (drill + whisk) are best suited for mixing the primer.Add the contents of the bag of Vega primer (250 g) to 2 litres of clean, cold water, stirring constantly. Ensure that all lumps are stirred in. After a swelling time of approx. 30 minutes, stir again vigorously and dilute with 6 litres of water. ApplicationApply Vega Primer evenly and generously. Only apply as much liquid as can be absorbed by the substrate.Remove any excess (wet, shiny areas) with a cloth before drying.Processing temperature at least 8°C.The mixed primer must be applied on the same day. Do not use primer that smells bad or foul under any circumstances: Danger of long-lasting odour problems even after drying!Drying time in a normal climateDry after approx. 8 hours at 20°C and can be recoated with paints or plasters based on lime putty or casein.Suitable toolsSuitable tools are good facade and ceiling brushes made of natural bristles. Do not spray or apply casein primer with a roller.You will find good façade and ceiling brushes in our range. Facade brush, lime brush, ceiling brushCleaning the toolsimmediately after use with water.

Content: 0.25 Kilogramme (€53.20* / 1 Kilogramme)

€13.30*

Kreidezeit window care set
Kreidezeit window care set
The Kreidezeit window care set protects wooden windows that have been treated with Kreidezeit stand oil paints or coloured wood stains from weakening the colour intensity and then protects them. Furthermore, soiled paintwork can be cleaned with the enclosed care soap. The set contains 100ml care soap and 100ml care oil as well as 1 set of instructions. Product informationThe window care set offers excellent protection against coloured renovation coats for comparatively little effort, as long-term and regular maintenance is required to maintain the function-protecting surface and appearance, which is shortened with the Kreidezeit window care set. Full declarationMaintenance soap: Olive oil soap. Maintenance oil: linseed oil, linseed oil stand oil, wood oil stand oil, manganese drierInspectionCheck painted surfaces at least every six months for soiling and damage (visual inspection) and clean and maintain as required . The gloss behaviour of the painted surfaces should be assessed during the inspection and cleaning at least every six months. Areas that have lost their lustre must be treated immediately with Kreidezeit window care oil. Areas that still have sufficient gloss should not be treated, as too frequent care on surfaces that are still glossy can lead to a greasy appearance and a sticky surface. Kreidezeit stand oil paints and wood stains are environmentally friendly and therefore deliberately not treated with fungicides. Even with fungicide-treated conventional wood coating systems, condensation-induced fungal growth on the surface is a known phenomenon (shadow formation, blackening). It is therefore important to check the surfaces for fungal infestation (usually small black spots) at least every six months and to remove this immediately with water and Kreidezeit care soap.The condition of the painted weatherboards should be checked every six months because they are most exposed to the weather. Cleaning Do not clean the wooden windows immediately after installation. Paint and silicone need approx. 4 weeks to cure completely. Clean the metal rain protection rail after the construction period. The water drainage slots must not be blocked. Clean dirt with a soft sponge and cleaning soap (1 tablespoon of soap diluted in 1 litre of water). Heavy soiling can also be treated with a more concentrated soap. Care and protection As a rule, care is required once a year on sunny and weathered sides and every 2 years on sides facing away from the weather. These intervals can vary considerably depending on the weather conditions and exposure of the surfaces. In principle, however, there are no defined maintenance intervals for the Kreidezeit Stand Oil Paint or Wood Stain System. Allow the cleaned surfaces to dry completely. The areas that have lost their lustre, especially on the sides exposed to the sun and weather, should be rubbed very thinly with a cloth soaked in maintenance oil. After 10 - 15 minutes, rub with a dry cloth and remove excess oil (excess oil that is not removed can be very shiny and sticky!) The colour intensity will return. Processing and drying temperature at least 10°C for at least 48 hours. Renovation Renovation is necessary at the latest when exterior stand oil paints are heavily weathered, chalk intensively or the wood surface becomes visible, or when the pigments in wood stains have been washed off by rain. The surfaces are cleaned with maintenance soap and areas that are still shiny are lightly sanded (grain size P 120-150).Renovation coats on Kreidezeit wood stain are carried out with wood stain for interior/exterior tinted with Kreidezeit pigments up to 175 g pigment per 1 litre of wood stain or coloured wood stain. Renovation coats on Kreidezeit stand oil paints are carried out with stand oil paint - full-fat. The weatherboards on windows should be repainted on the sunny sides every 2 years at the latest.

€17.20*

Kreidezeit worktop oil 0.5l
Kreidezeit worktop oil 0.5l
Kreidezeit worktop oil is solvent-free, hard-wearing and absorbs deeply when used, so that it can be used as surface protection for furniture, tables and worktops made from almost all types of wood. The product is suitable for the initial treatment of untreated wood as well as for its maintenance care indoors and is also tested in accordance with LFGB §31, which is why it is suitable for food contact.Product data sheet Safety data sheet The diffusible worktop oil can also be coloured with earth and mineral pigments depending on the purpose and use.Properties LFGB §31 tested, suitable for food contact.Resistant to saliva and perspiration according to DIN 53160Deeply penetrating Very hard-wearing solvent- and water-free dirt and water repellenteconomical diffusible does not burst, crack or peel easy to maintain free of lead, barium and cobalt made from natural and renewable raw materials veganFull declaration Fermentation alcohol (denatured with MEK, IPA, Bitrex), wax-free shellac, linseed oil varnish, titanium white, talcum, quartz, silicic acidProcessingRemove dirt from the substrate as far as possible (brush off, wash off).Stir the product thoroughly before use and apply thinly and evenly to the dry substrate using a brush or roller. One coat is usually sufficient to block weak stains, for heavy stains apply 2-3 coats with intermediate drying and without intermediate sanding.Can be recoated with KREIDEZEIT wall paints after approx. 24 hours.For subsequent coats of white wall paint, the insulating primer can be applied selectively. For subsequent coats of coloured wall paint or wall glazes, the insulating primer must be applied over the entire surface, otherwise coloured marks may appear. If glossy areas have been created by applying too thick a coat, the dried shellac insulating primer must be sanded to a matt finish before painting over with wall paint. The product can be diluted with KREIDEZEIT Alcohol up to 10 % vol.Drying timeDust-dry after approx. 30 minutes. Dry and recoatable after approx. 12 hours at 20 °C.Cleaning the tools Immediately after use with alcohol, then wash with Marseille Soap, Corfu Soap or Olive Care Soap and water.

Content: 0.5 Litres (€35.40* / 1 Litres)

€17.70*

NELA Premium PlasticFLEX smoothing trowel with 1 mm blade thickness, 280 x 110 mm
NELA Premium PlasticFLEX smoothing trowel with 1 mm blade thickness, 280 x 110 mm
Extra light - extra sturdy and durable100% Made in GermanyThe NELA Premium PlasticFLEX smoothing trowel with ergonomically perfect handle designProduct features:- Most stable handle attachment thanks to M8 nut- Rounded corners for working without a degree- Plastic blade- Aluminium die-cast support made of special alloy- High-tech adhesive tape for the permanently elastic connection of the plastic blade and the stainless steel support plate- Extra fine-ground edges and corners- Temperature and solvent resistant

€35.90*

Nela, chrome steel smoothing trowel made of special stainless steel, 180 x 120 mm
Nela, chrome steel smoothing trowel made of special stainless steel, 180 x 120 mm
- Ergonomic KORK in cork with ergonomically perfect handle design.- Most stable handle fastening thanks to M8 nut- Blade made from special stainless steel- Blade made of hardened, stainless chrome steel:- More flexibility and durability.Pre-bent blade with bevelled edges:- Ideal for concrete, plaster, drywall, stucco and pool coatings.- Chamfered edges for optimum processing of all common materials.- Blade underside ground crosswise.

€45.50*

Schwan Berner plastering trowel / straight neck length 260 mm
Schwan Berner plastering trowel / straight neck length 260 mm
Product description:with straight neckCraftsman qualityQuality tool from German manufacture / "Made in Germany"Solid plastic handle/soft handle

€9.98*

Schwan notched trowel/notched trowel 280 mm x 130 mm, blade thickness 0.7 mm
Schwan notched trowel/notched trowel 280 mm x 130 mm, blade thickness 0.7 mm
The professional tool for smoothing, mounting and embedding fabric. The notched trowels in our "Standard" series ensure optimum results: The application of tile adhesive and floor adhesive is quick and precise; the serrated edges allow you to work sparingly. With this quality notched trowel, you are investing in high quality and durability - guaranteed.Product description:STANDARD" seriesDimensions: 280 x 130 mmBlade thickness: 0.7 mmWith die-cast zinc supportQuality tool from German manufacture / "Made in Germany"

€5.83*

Sound felt strips made of 100% Isolena virgin sheep's wool, bulk density 100kg/m³
Sound felt strips made of 100% Isolena virgin sheep's wool, bulk density 100kg/m³
Isolena's highly stabilised sound felt strips are used for sound decoupling in many areas of application.Data sheet brochureSound absorber as a support for horizontal and sloping surfaces.Highly stabilised sound felt as underlay strips for sound decoupling between subfloor and construction.Thickness: 9 mmWidth: 100 mmLength roll: 10 mRaw material: 100% virgin sheep's wool, renewable and recyclable without additivesWool protection: Ionic ProtectDensity: 100 kg/m³Areas of application: Timber construction, acoustic ceilings, interior fittings and many other...

€17.90*

Steico multi Primer 1ltr. incl. application roller / Solvent-free adhesion primer
Steico multi Primer 1ltr. incl. application roller / Solvent-free adhesion primer
SetPrice incl. application roller with 4 replacement rollers (1 litre Steico MultiPrimer + 1 roller + 5 rollers)Improves the adhesion of bonds to wood-based panels and other absorbent substrates. The solvent-free adhesion promoter - Fast flash-off time - Strong depth effect - Can be applied on substrates as cold as -10 °C - Efficient material application thanks to practical dispenser bottle - Good water resistance - For various absorbent, mineral substrates (e.g. gypsum fibre boards, concrete, masonry) - For wood and wood-based materials (e.g. STEICO wood fibre insulation materials) Application STEICOmulti primer - Shake the container well before use - The material is applied to the substrate via the guide opening of the container and spread evenly with a brush or paint roller. The substrate must be dry and free of grease and dust - Before applying and pressing on STEICOmulti tape, allow the STEICOmulti primer to flash off until transparent (colour change allows visual inspection) - STEICOmulti primer can be removed with water when fresh. When the primer has hardened, cleaning is generally only possible mechanically

€24.99*

%
Steico multi renova 1.50m (75m²) vapour control layer
Steico multi renova 1.50m (75m²) vapour control layer
Moisture-variable vapour control layer for indoor use on roofs, walls and ceilings. It is particularly tear-resistant (grid reinforcement) made of 3-ply PP fleece. Special features: - Particularly robust and flexible - 3-ply, coated PP fleece, grid-reinforced - Extremely high tear resistance - Moisture variable, sd value 0.4 - 35 m - Suitable for blow-in insulation and matt insulation materials - Suitable for uphill and downhill installation with sufficient over-insulation with STEICO wood fibre underlay boards

Content: 75 Square metre (€3.05* / 1 Square metre)

€229.00* €245.00*

Steico multi UDB 1.50m (75m²) sarking and underlay membrane
Steico multi UDB 1.50m (75m²) sarking and underlay membrane
Highly diffusion-open sarking, sarking and airtight membranefor new build and renovationSpecial features: 3-ply, tear-resistant and flexible2 integrated self-adhesive zonesAirtight, highly diffusion-open and resistant to driving rainExtremely high tear resistanceFree weathering possible for up to 3 monthsFunctional layer reinforced on both sides with PP fibre fleece

Content: 75 Square metre (€3.05* / 1 Square metre)

€229.00*

%
Swan, Berlin trowel, swan neck, hardened blade
Swan, Berlin trowel, swan neck, hardened blade
Product description:With swan neckHardened steel bladeQuality tool from German manufacture / "Made in Germany"Solid plastic handle/soft handle

€15.99* €18.92*

%
Swan, North German trowel in the shape of a Finnish masonry trowel, 160 mm
Swan, North German trowel in the shape of a Finnish masonry trowel, 160 mm
Product description:Length 160 mmwith straight neckHardened steel bladeCraftsman qualityQuality tool from German manufacture / Made in GermanyThe picture shown does not correspond exactly to the product!

€9.99* €14.26*

Zubehör

Bindan EXPRESS Holzleim, B2/D2
Bindan EXPRESS Holzleim, B2/D2
Leimfugen mit BINDAN-RS trocknen transparent auf und sind schimmel- und feuchtigkeitsbeständig nach D2 DIN EN 204. Eine Verfärbung von gerbstoffhaltigen Hölzern ist durch die pH-Neutralität nicht zu erwarten. Vielseitig einsetzbar und bevorzugt verwendet für: Möbelbau, Modellbau, Serienfertigung, Vollholzverleimung, Montageverleimung (Nut und Feder, Dübel, Schlitz und Zapfen), Fugenverleimung, Flächenverleimung (MDF-, HPL-, Hartfaser-, Spanplatten), Furnierarbeiten.Auch für Verleimungen von Holz mit anderen Werkstoffen (Kork, Leder, Textilien, Pappe uvm.).BINDAN-RS erfüllt vollständig die Standards zur Verwendung für Kinderspielzeug, die aktuellen Anforderungen hierfür sind definiert in der Richtlinie 2009/48/EG über die Sicherheit von Spielzeug und der Spielzeugnorm DIN EN 71-3. Da sich diese Vorschriften ständig mit dem Stand der Technik weiterentwickeln, fragen Sie bitte die aktuelle Fassung unserer Erklärung hierzu an.

Content: 0.28 Kilogramme (€31.07* / 1 Kilogramme)

€8.70*

BINDAN Wasserfester Holzleim D3, Propellerleim
BINDAN Wasserfester Holzleim D3, Propellerleim
Inhalt: 525g/FlascheLeimfugen mit BINDAN-P Propellerleim trocknen transparent auf und sind schimmel-, feuchtigkeits- und wasserbeständig nach D3 DIN EN 204. Ideal für alle Holzverleimungen, besonders bei zukünftig hohem Anspruch an Festigkeit und Beständigkeit: Möbel, Türen, Fenster, Vollholz, Montage (Nut und Feder, Dübel, Schlitz und Zapfen), Fugen, Flächen (MDF-, HPL-, Hartfaser-, Spanplatten), Furnierarbeiten und vieles mehr. Auch für Verleimungen von Holz mit anderen Werkstoffen (Kork, Leder, Textilien, Pappe uvm.).Bei einfachen Verleimungen genügt beschweren, keine Zwinge oder Werkzeug notwendig. BINDAN-P Propellerleim erfüllt vollständig die Standards zur Verwendung für Kinderspielzeug, die aktuellen Anforderungen hierfür sind definiert in der Richtlinie 2009/48/EG über die Sicherheit von Spielzeug und der Spielzeugnorm DIN EN 71-3. Da sich diese Vorschriften ständig mit dem Stand der Technik weiterentwickeln, fragen Sie bitte die aktuelle Fassung unserer Erklärung hierzu an.

Content: 0.525 Kilogramme (€22.29* / 1 Kilogramme)

€11.70*

%
Clay colour (wine)
Clay colour (wine)
Kreidezeit clay paint is easy to apply and provides excellent coverage with a velvety matt finish for interior walls and ceilings. Low odour, antistatic, highly diffusible, free from preservatives and synthetic resin binders. Suitable for use on clay plaster and all other load-bearing plasters as well as woodchip, pure paper wallpaper, paper fleece and concrete. CoveragePackage contents are sufficient for up to 8m2 per coat IngredientsWhite clay, marble powder, cellulose fibres, vegetable casein, soda, methyl cellulose, earth and mineral pigmentsPreparing the colourStir the contents of the bag into 1 litre of cold water, use a drill with whisk. Leave to soak for at least 30 minutes, then stir again vigorously. Dilute further with water as required.ApplicationPrime absorbent substrates with casein primer (Art. 145). Apply the clay colour evenly and smoothly with a roller or brush.Storage Can be stored in a dry place for at least 1 yearAttentionPay attention to possible allergies to natural substances. A typical product odour may occur due to the natural raw materials used! Store out of reach of children.

€9.99* €11.50*

%
Claytec, clay adhesive and reinforcing mortar, bag 25 kg
Claytec, clay adhesive and reinforcing mortar, bag 25 kg
Clay adhesive and reinforcing mortar for reinforcing layers on clay boards as well as wood fibre finishing and interior insulation boards. Clay adhesive and reinforcing mortar consists of clay and cellulose. This guarantees optimum workability, even with thin coats. With a compressive strength of 3.9 MPa, which is new for clay mortar, and an adhesive strength of 0.85 MPa, clay bonding and reinforcing mortar guarantees the strength of the entire construction. It is the basis for fine Claytec clay finishing plasters and YOSIMA. With good preparatory work, it can also be simply painted with the Clayfix clay coating system.Data sheet Application videoHow to useAdhesive and bonding mortar as a dry, fine-grained ready-mix for bonding lightweight building and interior insulation boards to various substrates, as a reinforcing mortar on clay building boards, clay-hemp boards, wood fibre insulation and wood fibre finishing boards and mineral foam boards.CompositionSand up to 1.0 mm, clay and loam, talc, perlite, plant fibres and cellulose.Delivery form, yield25 kg bags (makes 17 litres of mortar for 5 m2), 48 bags/pal.StorageCan be stored in a cool, dry place indefinitely.Mortar preparationThe 25 kg dry mix is gradually stirred into 8-9 litres of clean water using a drill (≥ 800 watts) or mixer and stirring paddle (Ø 125 mm). The amount of water added is slightly less for bonding mortar. Working consistency paste-like according to the desired application with a notched trowel or spatula.Work well again after 30 minutes resting time. The mortar is now ready to use.Plaster baseThe substrate must be stable, frost-free, dry, clean, free of salt, sufficiently rough and absorbent. Levelling coats of clay plaster mortar must be completely dry.The surface must be as level as necessary for the bonding described below. Small unevenness (small individual areas up to 5 cm in diameter and 3 mm deep) can be levelled with the adhesive. Larger imperfections must be filled with a suitable mortar and left to dry.ApplicationThe adhesive is applied to the back of the panels to be bonded using a notched trowel or spatula (8-10 mm notches). A thin layer of adhesive should be applied to the entire surface, including the grooves. The first board is applied immediately and pressed firmly onto the substrate; contact must be ensured over the entire surface.Uneven masonry and plaster surfaces are slightly pre-wetted and roughly levelled. The back-coated boards (see above) are pressed in wet-on-wet.Boards can be additionally mechanically fixed as required, e.g. on sloping ceilings and roofs, see corresponding board product sheets or worksheets.As a bonding filler for thick-layer plasters on insulation boards (e.g. for wall surface heating) and similar applications, the slightly stiffer mortar is applied in the same way using a notched trowel or spatula.For reinforcement layers, the 3 mm thick mortar is applied. It can also be sprayed on with a plastering machine; resting times are not necessary for this application. Reinforcement mesh is worked into the surface of the layer while it is still wet.HardeningThe curing time is 24-72 hours, depending on the drying possibilities and absorbency of the substrate. With additional mechanical panel fixing and subsequent thin-layer coating, work can continue immediately.Work samplesAdhesion to the substrate must always be checked with the respective board to be fixed using a sufficiently large working sample. Complaints not resulting from mixing errors at the factory are excluded.

€29.03* €32.19*

Cutting device for Isolena sheep's wool insulation
Cutting device for Isolena sheep's wool insulation
Cutter with circular blade for optimum processing of all Isolena products.This ergonomically adapted tool, for the installation of all Isolena sheep's wool insulation products,enables you to quickly, cleanly and effectively adapt your sheep's wool product to its intended purpose.Cutting the insulation rolls to lengthOn-site bevellingCutting of stripsYou can also order this product on loan with your purchased Isolena products.The purchase price will be charged to you as a deposit and credited back after return.The hire charge is EUR 50 for the first two weeks and EUR 15 for each additional week or part thereof.week EUR 15. The amount incurred will be deducted from the deposit paid after the device has been returned.The borrower must bear the cost of returning the equipment.The borrower will be charged EUR 29 for a defective circular blade.

€294.06*

Glass fabric/reinforcement fabric for clay plasters, roll 50 m
Glass fabric/reinforcement fabric for clay plasters, roll 50 m
Surface reinforcement for clay adhesive and reinforcing mortar and all clay plasters. It is tension-resistant, very fine and particularly easy to work with.Clay plasters worksheetApplicationAs surface reinforcement for clay plasters, HFD interior insulation, cladding made of clay building boards and wood fibre boards, cladding made of clay building boards, clay-hemp boards and wood fibre boards.TextureLeno fabric made of glass fibre yarn/roving, finished with polymer finish for scrims. Weight approx. 110g/m², warp/weft approx. 14/14 Fa per 10 cm, clear mesh size approx. 6 x 6 mm, made in Germany, alkali-resistant, shift-proofDelivery formRoll, width 100 cm, length 50 mStorageDry, airy and protected from direct sunlight for at least three years.Material requirementAs for m² plaster surface plus 10% to 20% reserve for offcuts and overlaps.ApplicationSurface reinforcement: The mesh is applied to the freshly applied, still plastic mortar and rubbed in with the felt board. The overlap in the joint area must be approx. 10 cm. (For cladding made of clay building boards, clay hemp boards and wood fibre finishing boards, the fabric is usually worked into the clay adhesive and reinforcing mortar over the entire surface).

Content: 50 Square metre (€0.99* / 1 Square metre)

€49.50*

Kreidezeit floor hard wax, 1 litre
Kreidezeit floor hard wax, 1 litre
Kreidezeit Floor Hard Wax is used to treat oiled surfaces, providing additional protection for floors, furniture, doors and much more. This silky gloss protection protects oiled surfaces (wood, cork, stone, ceramic) and linoleum from dirt and water.The resulting hardness is largely due to the carnauba wax it contains, which is the hardest natural wax.The floor hard wax cannot be used in wet rooms for kitchen worktops or on untreated, absorbent surfaces.Product informationProduct propertiesready to use, pastyTread-resistant, dirt and water repellenttransparent, silky glossdiffusible, antistatic, warm to the toucheasy to apply, easy to repairresistant to saliva and perspiration in accordance with DIN 53160free of cobalt, lead and bariumFull declarationLinseed oil, balsamic turpentine oil, carnauba wax, beeswax, linseed oil stand oil, wood oil stand oil, manganese drierApplicationApply Floor Hard Wax evenly and very thinly with a lint-free cloth. Avoid protrusions.For larger areas: Apply floor hard wax either in patches with a spatula or heat to approx. 60 °C, drizzle onto the floor and then massage in evenly with a floor polisher.After 4 - 6 hours at the latest, the surface must be polished with a lint-free cloth, a brush, a floor polisher or a polishing machine until the surface has a silky lustre. Processing temperature at least 10 °C.Dried residues that are not removed are difficult to polish off later and remain as a white haze. These residues can be removed with a cleaning pad (machine) or with a pot sponge (Scotch Brite).Drying timeThe waxed surface must be polished after 4 - 6 hours at approx. 20 °C. The wax is fully hardened after approx. 24-48 hours.Suitable toolsLint-free cloths, surface/floor spatula. For larger surfaces: Floor polishersCleaning the toolsImmediately after use, wash with balsamic turpentine oil and then with olive care soap or Corfu soap.

€29.00*

%
Kreidezeit linseed oil/stand oil
Kreidezeit linseed oil/stand oil
Linseed oil stand oil is pre-dried linseed oil with a relatively long drying time; linseed oil varnish is linseed oil with a drying accelerator (manganese dryer).Linseed oil stand oil is produced on the basis of linseed oil and is used as an additive for linseed oil paints, as a binder for enamel paints, oil resin paints and printing inks.Linseed oil stand oil is a high-quality raw material for the production of oil paints and glazes.

Content: 0.5 Litres (€14.00* / 1 Litres)

€7.00* €9.00*

Kreidezeit mould first aid kit
Kreidezeit mould first aid kit
The ecological Kreidezeit Mould First Aid Kit is free from biocides and contains everything that can be used against minor mould infestations.Minor mould infestation can be found in the majority of homes today and can lead to significant health problems. According to the World Health Organisation (WHO), residents of such homes have an increased risk of developing respiratory infections and asthma as well as allergies. The Kreidezeit mould first aid kit offers a simple solution to such problems. The package contains completely ecological, vegan products that are also free of plastics and biocides and can be used to consistently prevent and combat mould. Contents: 500 ml KREIDEZEIT alcohol 250 ml mould cracker 1 litre limewash paint 1 pair of rubber gloves 1 pair of safety goggles 1 professional flat brush 50 mm 1 mould information flyerProduct InformationAlcohol Safety Data Sheet Alcohol Product informationMouldcracker Safety data sheet Mouldcracker Product informationSump lime paint Safety data sheet Sump lime paint Our biocide-free solutionAlcohol removes minor mould stains with a one-off effect. Our pure alcohol can quickly and easily dissolve and remove mould stains. The mould is removed superficially, but this is only "first aid". Afterwards, the following products should be used as soon as possible: Mould Cracker encapsulates spores, binds them permanently and thus protects against their further spread. At the same time, the surface becomes highly alkaline, which prevents new growth. The mould cracker is not colourfast and should be painted over with marsh lime paint if necessary. It adheres to almost any surface and is also suitable, for example, for restoring infested back walls of cupboards. Effective for many months. Lime works best against fungi due to its long-lasting alkalinity. Lime paints are our tried and tested products for the permanent removal and colour masking of mould. A double coat is usually sufficient to prevent mould from returning. Our recommendations relate to mould infestation of max. 5 m². In the case of massive infestation of entire rooms or even buildings, a specialist should be called in. If in doubt, you can discuss your concerns with our technical advisors. Structural defects and special features can impair the effect of the products presented.

€40.00*

%
Kreidezeit stainless steel cleaner, tin 500 g
Kreidezeit stainless steel cleaner, tin 500 g
Kreidezeit stainless steel cleaner is a fine surface cleaner made from natural raw materials and can be used on steel, glass, enamel and chrome. There are numerous areas of application such as in the household, in the garden, in the workshop, for stainless steel grills and much more. There is also a viscose sponge made from renewable raw materials.

Content: 0.5 Kilogramme (€17.98* / 1 Kilogramme)

€8.99* €9.90*

Kreidezeit Vega primer, bag 250 g
Kreidezeit Vega primer, bag 250 g
Vega primer, container size 250 g Range 40 - 60 m² Consumption per m² 20 g Exact consumption to be determined on the object Product information Safety data sheetKreidezeit Vega Primer is a colourless, transparent primer that is used for subsequent coats of paint and thin-layer plaster applications indoors. It offers a wide range of application options. Kreidezeit Vega Primer is particularly suitable for priming clay and lime plasters, as it has no reducing effect on the vapour absorption of plasters (sD value < 0.01m).It can be used on all untreated and absorbent surfaces such as clay, lime, lime-cement and gypsum plasters, gypsum plasterboard and gypsum fibreboards, stone and concrete, but is unsuitable for all smooth, non-absorbent surfaces and permanently damp substrates.Recommended for priming absorbent old coatings before renovation: e.g. KREIDEZEIT casein paints, clay paints, limewash paints and emulsion paints.For transparent consolidation of plasters, especially clay plasters in interior areas; here it is necessary to create test areas (see "Tips").The use of Vega primer within the various KREIDEZEIT paint and plaster systems is described in the corresponding product information.PropertiesPowder for mixing with waterReduces the absorbency of highly absorbent substrates and equalises different absorbencies of the substrateStrengthens slightly sanding substratesVery good penetration capacityColourless transparentEasy to applyVery economicalhighly diffusiblefree from preservativescolour residues are compostableveganFull declaration: vegetable casein, soda Mixing the primerA 10 litre bucket and a mixer (drill + whisk) are best suited for mixing the primer.Add the contents of the bag of Vega primer (250 g) to 2 litres of clean, cold water, stirring constantly. Ensure that all lumps are stirred in. After a swelling time of approx. 30 minutes, stir again vigorously and dilute with 6 litres of water. ApplicationApply Vega Primer evenly and generously. Only apply as much liquid as can be absorbed by the substrate.Remove any excess (wet, shiny areas) with a cloth before drying.Processing temperature at least 8°C.The mixed primer must be applied on the same day. Do not use primer that smells bad or foul under any circumstances: Danger of long-lasting odour problems even after drying!Drying time in a normal climateDry after approx. 8 hours at 20°C and can be recoated with paints or plasters based on lime putty or casein.Suitable toolsSuitable tools are good facade and ceiling brushes made of natural bristles. Do not spray or apply casein primer with a roller.You will find good façade and ceiling brushes in our range. Facade brush, lime brush, ceiling brushCleaning the toolsimmediately after use with water.

Content: 0.25 Kilogramme (€53.20* / 1 Kilogramme)

€13.30*

Kreidezeit window care set
Kreidezeit window care set
The Kreidezeit window care set protects wooden windows that have been treated with Kreidezeit stand oil paints or coloured wood stains from weakening the colour intensity and then protects them. Furthermore, soiled paintwork can be cleaned with the enclosed care soap. The set contains 100ml care soap and 100ml care oil as well as 1 set of instructions. Product informationThe window care set offers excellent protection against coloured renovation coats for comparatively little effort, as long-term and regular maintenance is required to maintain the function-protecting surface and appearance, which is shortened with the Kreidezeit window care set. Full declarationMaintenance soap: Olive oil soap. Maintenance oil: linseed oil, linseed oil stand oil, wood oil stand oil, manganese drierInspectionCheck painted surfaces at least every six months for soiling and damage (visual inspection) and clean and maintain as required . The gloss behaviour of the painted surfaces should be assessed during the inspection and cleaning at least every six months. Areas that have lost their lustre must be treated immediately with Kreidezeit window care oil. Areas that still have sufficient gloss should not be treated, as too frequent care on surfaces that are still glossy can lead to a greasy appearance and a sticky surface. Kreidezeit stand oil paints and wood stains are environmentally friendly and therefore deliberately not treated with fungicides. Even with fungicide-treated conventional wood coating systems, condensation-induced fungal growth on the surface is a known phenomenon (shadow formation, blackening). It is therefore important to check the surfaces for fungal infestation (usually small black spots) at least every six months and to remove this immediately with water and Kreidezeit care soap.The condition of the painted weatherboards should be checked every six months because they are most exposed to the weather. Cleaning Do not clean the wooden windows immediately after installation. Paint and silicone need approx. 4 weeks to cure completely. Clean the metal rain protection rail after the construction period. The water drainage slots must not be blocked. Clean dirt with a soft sponge and cleaning soap (1 tablespoon of soap diluted in 1 litre of water). Heavy soiling can also be treated with a more concentrated soap. Care and protection As a rule, care is required once a year on sunny and weathered sides and every 2 years on sides facing away from the weather. These intervals can vary considerably depending on the weather conditions and exposure of the surfaces. In principle, however, there are no defined maintenance intervals for the Kreidezeit Stand Oil Paint or Wood Stain System. Allow the cleaned surfaces to dry completely. The areas that have lost their lustre, especially on the sides exposed to the sun and weather, should be rubbed very thinly with a cloth soaked in maintenance oil. After 10 - 15 minutes, rub with a dry cloth and remove excess oil (excess oil that is not removed can be very shiny and sticky!) The colour intensity will return. Processing and drying temperature at least 10°C for at least 48 hours. Renovation Renovation is necessary at the latest when exterior stand oil paints are heavily weathered, chalk intensively or the wood surface becomes visible, or when the pigments in wood stains have been washed off by rain. The surfaces are cleaned with maintenance soap and areas that are still shiny are lightly sanded (grain size P 120-150).Renovation coats on Kreidezeit wood stain are carried out with wood stain for interior/exterior tinted with Kreidezeit pigments up to 175 g pigment per 1 litre of wood stain or coloured wood stain. Renovation coats on Kreidezeit stand oil paints are carried out with stand oil paint - full-fat. The weatherboards on windows should be repainted on the sunny sides every 2 years at the latest.

€17.20*

Kreidezeit worktop oil 0.5l
Kreidezeit worktop oil 0.5l
Kreidezeit worktop oil is solvent-free, hard-wearing and absorbs deeply when used, so that it can be used as surface protection for furniture, tables and worktops made from almost all types of wood. The product is suitable for the initial treatment of untreated wood as well as for its maintenance care indoors and is also tested in accordance with LFGB §31, which is why it is suitable for food contact.Product data sheet Safety data sheet The diffusible worktop oil can also be coloured with earth and mineral pigments depending on the purpose and use.Properties LFGB §31 tested, suitable for food contact.Resistant to saliva and perspiration according to DIN 53160Deeply penetrating Very hard-wearing solvent- and water-free dirt and water repellenteconomical diffusible does not burst, crack or peel easy to maintain free of lead, barium and cobalt made from natural and renewable raw materials veganFull declaration Fermentation alcohol (denatured with MEK, IPA, Bitrex), wax-free shellac, linseed oil varnish, titanium white, talcum, quartz, silicic acidProcessingRemove dirt from the substrate as far as possible (brush off, wash off).Stir the product thoroughly before use and apply thinly and evenly to the dry substrate using a brush or roller. One coat is usually sufficient to block weak stains, for heavy stains apply 2-3 coats with intermediate drying and without intermediate sanding.Can be recoated with KREIDEZEIT wall paints after approx. 24 hours.For subsequent coats of white wall paint, the insulating primer can be applied selectively. For subsequent coats of coloured wall paint or wall glazes, the insulating primer must be applied over the entire surface, otherwise coloured marks may appear. If glossy areas have been created by applying too thick a coat, the dried shellac insulating primer must be sanded to a matt finish before painting over with wall paint. The product can be diluted with KREIDEZEIT Alcohol up to 10 % vol.Drying timeDust-dry after approx. 30 minutes. Dry and recoatable after approx. 12 hours at 20 °C.Cleaning the tools Immediately after use with alcohol, then wash with Marseille Soap, Corfu Soap or Olive Care Soap and water.

Content: 0.5 Litres (€35.40* / 1 Litres)

€17.70*

NELA Premium PlasticFLEX smoothing trowel with 1 mm blade thickness, 280 x 110 mm
NELA Premium PlasticFLEX smoothing trowel with 1 mm blade thickness, 280 x 110 mm
Extra light - extra sturdy and durable100% Made in GermanyThe NELA Premium PlasticFLEX smoothing trowel with ergonomically perfect handle designProduct features:- Most stable handle attachment thanks to M8 nut- Rounded corners for working without a degree- Plastic blade- Aluminium die-cast support made of special alloy- High-tech adhesive tape for the permanently elastic connection of the plastic blade and the stainless steel support plate- Extra fine-ground edges and corners- Temperature and solvent resistant

€35.90*

Nela, chrome steel smoothing trowel made of special stainless steel, 180 x 120 mm
Nela, chrome steel smoothing trowel made of special stainless steel, 180 x 120 mm
- Ergonomic KORK in cork with ergonomically perfect handle design.- Most stable handle fastening thanks to M8 nut- Blade made from special stainless steel- Blade made of hardened, stainless chrome steel:- More flexibility and durability.Pre-bent blade with bevelled edges:- Ideal for concrete, plaster, drywall, stucco and pool coatings.- Chamfered edges for optimum processing of all common materials.- Blade underside ground crosswise.

€45.50*

Schwan Berner plastering trowel / straight neck length 260 mm
Schwan Berner plastering trowel / straight neck length 260 mm
Product description:with straight neckCraftsman qualityQuality tool from German manufacture / "Made in Germany"Solid plastic handle/soft handle

€9.98*

Schwan notched trowel/notched trowel 280 mm x 130 mm, blade thickness 0.7 mm
Schwan notched trowel/notched trowel 280 mm x 130 mm, blade thickness 0.7 mm
The professional tool for smoothing, mounting and embedding fabric. The notched trowels in our "Standard" series ensure optimum results: The application of tile adhesive and floor adhesive is quick and precise; the serrated edges allow you to work sparingly. With this quality notched trowel, you are investing in high quality and durability - guaranteed.Product description:STANDARD" seriesDimensions: 280 x 130 mmBlade thickness: 0.7 mmWith die-cast zinc supportQuality tool from German manufacture / "Made in Germany"

€5.83*

Sound felt strips made of 100% Isolena virgin sheep's wool, bulk density 100kg/m³
Sound felt strips made of 100% Isolena virgin sheep's wool, bulk density 100kg/m³
Isolena's highly stabilised sound felt strips are used for sound decoupling in many areas of application.Data sheet brochureSound absorber as a support for horizontal and sloping surfaces.Highly stabilised sound felt as underlay strips for sound decoupling between subfloor and construction.Thickness: 9 mmWidth: 100 mmLength roll: 10 mRaw material: 100% virgin sheep's wool, renewable and recyclable without additivesWool protection: Ionic ProtectDensity: 100 kg/m³Areas of application: Timber construction, acoustic ceilings, interior fittings and many other...

€17.90*

Steico multi Primer 1ltr. incl. application roller / Solvent-free adhesion primer
Steico multi Primer 1ltr. incl. application roller / Solvent-free adhesion primer
SetPrice incl. application roller with 4 replacement rollers (1 litre Steico MultiPrimer + 1 roller + 5 rollers)Improves the adhesion of bonds to wood-based panels and other absorbent substrates. The solvent-free adhesion promoter - Fast flash-off time - Strong depth effect - Can be applied on substrates as cold as -10 °C - Efficient material application thanks to practical dispenser bottle - Good water resistance - For various absorbent, mineral substrates (e.g. gypsum fibre boards, concrete, masonry) - For wood and wood-based materials (e.g. STEICO wood fibre insulation materials) Application STEICOmulti primer - Shake the container well before use - The material is applied to the substrate via the guide opening of the container and spread evenly with a brush or paint roller. The substrate must be dry and free of grease and dust - Before applying and pressing on STEICOmulti tape, allow the STEICOmulti primer to flash off until transparent (colour change allows visual inspection) - STEICOmulti primer can be removed with water when fresh. When the primer has hardened, cleaning is generally only possible mechanically

€24.99*

%
Steico multi renova 1.50m (75m²) vapour control layer
Steico multi renova 1.50m (75m²) vapour control layer
Moisture-variable vapour control layer for indoor use on roofs, walls and ceilings. It is particularly tear-resistant (grid reinforcement) made of 3-ply PP fleece. Special features: - Particularly robust and flexible - 3-ply, coated PP fleece, grid-reinforced - Extremely high tear resistance - Moisture variable, sd value 0.4 - 35 m - Suitable for blow-in insulation and matt insulation materials - Suitable for uphill and downhill installation with sufficient over-insulation with STEICO wood fibre underlay boards

Content: 75 Square metre (€3.05* / 1 Square metre)

€229.00* €245.00*

Steico multi UDB 1.50m (75m²) sarking and underlay membrane
Steico multi UDB 1.50m (75m²) sarking and underlay membrane
Highly diffusion-open sarking, sarking and airtight membranefor new build and renovationSpecial features: 3-ply, tear-resistant and flexible2 integrated self-adhesive zonesAirtight, highly diffusion-open and resistant to driving rainExtremely high tear resistanceFree weathering possible for up to 3 monthsFunctional layer reinforced on both sides with PP fibre fleece

Content: 75 Square metre (€3.05* / 1 Square metre)

€229.00*

%
Swan, Berlin trowel, swan neck, hardened blade
Swan, Berlin trowel, swan neck, hardened blade
Product description:With swan neckHardened steel bladeQuality tool from German manufacture / "Made in Germany"Solid plastic handle/soft handle

€15.99* €18.92*

%
Swan, North German trowel in the shape of a Finnish masonry trowel, 160 mm
Swan, North German trowel in the shape of a Finnish masonry trowel, 160 mm
Product description:Length 160 mmwith straight neckHardened steel bladeCraftsman qualityQuality tool from German manufacture / Made in GermanyThe picture shown does not correspond exactly to the product!

€9.99* €14.26*

This website uses cookies to ensure the best experience possible. More information...