Kreidezeit Floor Hard Oil
£20.24*
Content:
0.75 Litres
(£26.99* / 1 Litres)
Available, delivery time: 2-5 days
Product number:
11-310
Product information "Kreidezeit Floor Hard Oil"
Kreidezeit Floor Hard Oil is a tried and tested universal oil for a wide range of applications, which is made from natural products and does not contain any "hidden" alkyd resins. It offers robust, reliable protection for almost all types of wood and wooden surfaces indoors and can be used, for example, on floors, worktops, tables, furniture, beams, window interiors, panelling and much more.
Coverage per coat 12 m²
Consumption per m² 0.06 litres
Exact consumption must be determined on the object.
Due to the high linseed oil content, deep penetration into even the smallest wood pores is possible, as well as a long "open" working time. The use of natural base turpentine oil also offers the advantage that the hard floor oil can be used on almost all woods and wooden surfaces, including tannin-containing and dense woods.
The product can be applied to all Kreidezeit oils, glazes and waxes and can also be tinted with earth and mineral pigments if required. To do this, first mix a small amount of the product with the pigments and then stir into the main quantity.
Alternatively, the product can be tinted in any ratio with stand oil colour - semi-fat.
Properties
Tread-resistant, dirt and water repellent
Solvent-based, very economical
does not crack or become brittle
diffusible, antistatic, warm to the touch
transparent, honey-coloured, scorching
excellent penetration capacity
easy to apply, easy to repair
suitable for children's toys in accordance with EN 71-3
resistant to saliva and perspiration according to DIN 53160
free of cobalt, lead and barium
vegan
Full declaration
Linseed oil, balsamic turpentine oil, linseed oil stand oil, wood oil stand oil, colophony glycerine ester, manganese drier
Processing
Shake the product briefly before use.
KREIDEZEIT Hard Floor Oil is applied twice with intermediate drying. Intermediate sanding may be necessary before the second application.
Mix containers of different batch numbers together before use. The product must not be poured onto surfaces!
Clean and remove dust from untreated substrates.
KREIDEZEIT Hard Floor Oil is ready to use and is applied undiluted.
1. basic sanding
Sand the wood (grit P 80 - 100), round the edges. Do not sand finer as the wood would otherwise be compacted and could not absorb enough oil. It is better to "open up" new, smooth, planed or finely pre-sanded wood by sanding.
Remove dust thoroughly after sanding.
2. first coat
a) Hand application:
Apply KREIDEZEIT Floor Hard Oil evenly with a brush, short-pile roller, cloth or sponge. After 10 - 20 minutes, rub the entire treated surface thoroughly with a dry, lint-free cloth until the surface has a uniform silky matt appearance.
b) Machine application:
Apply KREIDEZEIT Floor Hard Oil with a short-pile roller. After a reaction time of 10 - 20 minutes, rub the entire treated surface thoroughly with a soft pad until the surface has a uniform silky matt appearance. Change the pads in good time when they become saturated.
When rubbing down, ensure that any oil that has not been absorbed is removed completely, otherwise shiny or sticky spots may remain.
KREIDEZEIT Hard Floor Oil must penetrate the wood completely and must not form a layer on the wood.
3. intermediate sanding (optional)
Intermediate sanding is only necessary if the surface has dried rough after the first coat, e.g. due to raised wood fibres. Intermediate sanding with sandpaper (grain size P 100 - 120) in the direction of the fibres.
Remove dust thoroughly after sanding.
4. second coat
Repeat the finish as for the first coat.
5. wax treatment
Oiled floors generally do not require wax treatment. To increase the gloss, a final treatment with KREIDEZEIT Carnauba Wax Emulsion can be applied after 48 hours at the earliest. To do this, dilute 1 part emulsion with 2 parts water, apply evenly and thinly, allow to dry and polish as required.
Drying time
Dry and recoatable at 20 °C and 60 % relative humidity after approx. 24 hours (or 48 hours on substrates containing tannin, oak, etc.).
High humidity, cold and substrates containing tannins significantly extend the drying time.
Fully cured after approx. 4 weeks. During this time, use carefully and protect from water.
Suitable tools
Paint brushes / surface brushes, short-pile rollers (Magic felt, Art. 6517), lint-free cloths, solvent-resistant plastic sponges. For larger areas: Floor machines with soft pads Do not apply the product with a surface/floor scraper.
Cleaning the tools
Immediately after use, wash with balsamic turpentine oil and then with olive care soap or Corfu soap.
| Anwendungen: | Innenausbau, Möbelbau, Untergrundvorbereitung / Grundierung |
|---|---|
| Gebinde: | 2,5 Liter, 5 Liter, 10 Liter, Dose 0,75 l |
| Hersteller: | Kreidezeit |
| Produktgruppe: | Farben |
| Produktkategorie: | Einrichten, Farben/Putze, Fensterprodukte, Zubehör |
| Verpackung: | Dose |
| Versand: | Paketversand, Selbstabholung möglich |
Login